Frost-Free Top Mount
Refrigerator/Freezer
Réfrigérateur/congélateur sans givre à compar
superposés
Refrigerador/congelador sin escarcha, de puertas horizontales
Design may vary by model number.
El diseño puede variar conforme al número de modelo.
User Manual Guide de 
Manual del Usuario Model HT SERIES
P/N 0060517094 Rev A 05/13
TABLE OF CONTENTS
SAFETY INFORMATION
Important Safety |
|
4 |
SET UP & USE |
|
|
Electrical Requirements |
5 |
|
Guide |
|
5-6 |
for Unpacking |
5 |
|
Parts Included |
|
6 |
Accessories |
|
7 |
Reversing the Doors |
7 |
|
|
|
8 |
Door Handle |
|
8 |
Features and Use |
|
9 |
CLEANING & CARE |
|
|
Proper Care and Maintenance |
10-11 |
|
TROUBESHOOTING & WARRANTY |
|
|
Normal Oper |
Sounds |
11 |
Troubleshoo |
|
12-13 |
Customer Service |
|
13 |
Limited Warranty |
|
14 |
ENGLISH
PRODUCT REGISTRATION
Thank you for purchasing your Haier product.
best use of your product.
Remember to record the model and serial numbers. They are on a label inside of the product.
Staple your receipt to your manual. You will need it to obtain warranty service.
Model number
Serial number
Date of purchase
ENGLISH
IMPORTANT SAFETY INSTRUCTIONS
WARNING
READ ALL INSTRUCTIONS BEFORE USING THIS APPLIANCE. WHEN USING THIS APPLIANCE, ALWAYS EXERCISE BASIC SAFETY PRECAUTIONS, INCLUDING THE FOLLOWING:
NOTE: If the ref
before plugging it in.
1)Use this appliance only for its intended purpose as described in this use and care manual.
2)This refrigerator must be properly installed in accordance with the installa
on in
used. See Electrical Re
3)This refrigerator should not be recessed or built-in an enclosed cabinet. It is designed for freestanding installa
on only.
4)Never unplug your refrigerator by pulling on the power cord. Always grasp the plug firmly and pull straight out from the outlet.
5)Repair or replace immediately all electric service cords that have become frayed or otherwise
damaged. Do not use a cord that shows cracks or abrasion damage along its length, at the plug or at the connector end.
6)If your old refrigerator is not being used, we recommend that you remove the doors. This will reduce the possibility of danger to children.
WARNING
AFTER YOUR REFRIGERATOR IS IN OPERATION, DO NOT TOUCH THE COLD SURFACES IN THE FREEZER COMPARTMENT, PARTICULARLY WHEN HANDS ARE DAMP OR WET SKIN MAY ADHERE TO THESE EXTREMELY COLD SURFACES.
7)Do not use any electrical device or any sharp instrument in defro
ng your refrigerator.
8)Unplug your refrigerator before cleaning or making any repairs.
NOTE: If for any reason this product requires service, we strongly recommend that a certi ed technician perform service.
9) Do not operate your refrigerator in the presence of explosive fumes.
SAVE THESE INSTRUCTIONS
DANGER
RISK OF CHILD ENTRAPMENT. BEFORE YOU THROW AWAY YOUR OLD REFRIGERATOR OR FREEZER, TAKE OFF THE DOORS. LEAVE THE SHELVES IN PLACE SO THAT CHILDREN MAY NOT EASILY CLIMB INSIDE.
PAGE 4 • SAFETY INFORMATION
ELECTRICAL REQUIREMENTS
GROUNDING INSTRUCTIONS
WARNING
ELECTRICAL REQUIREMENT - SHOCK HAZARD
•Make sure there is a suitable power outlet. 115 Volts, 15 Amps, 3-prong (Grounded) power outlet with proper grounding to power the refrigerator.
•Avoid the use of 3-prong adapters or removing the grounding prong from the power cord in order to
accommodate a 2-prong outlet. This is a dangerous prac
ce since it provides no e ec
ve grounding for the refrigerator and may result in a shock or fire hazard.
USE OF EXTENSION CORDS
WARNING
USE OF EXTENSION CORD - POTENTIAL SAFETY HAZARD
•Avoid the use of an extension cord because of poten
al safety hazards under certain condi
ons. If it is necessary to use an extension cord, use only a 3-wire extension cord that has a 3-prong
grounding plug and a 3-slot outlet that will accept the plug. The marked ra
ng of the extension cord must be equal to or greater than the electrical ra
ng of the appliance.
DO NOT USE EXTENSION CORD LONGER THAN 12 FT.
INSTALLATION GUIDE
INSTALLATION LIMITATIONS
•Select a suitable loca
on for the refrigerator on a hard, even surface away from direct sunlight or heat source, e.g. radiators, baseboard heaters, cooking appliances, etc. Any floor unevenness should be corrected with the leveling legs located on the front bo
om corners of the refrigerator.
UNPACKING YOUR REFRIGERATOR
1.Remove all packaging material. This includes the corrugated base and all adhesive tape holding the refrigerator accessories inside and outside.
2.Inspect and remove any remains of packing, tape or printed materials before powering on the refrigerator.
NOTE: If your refrigerator comes with a snack pan, remove the blue adhesive tape from the rear of the pan. The pan will not slide in and out without removing the tape.
NOTE: If your refrigerator comes with smooth or stainless steel doors, please remove the clear film before turning it on for the first time. When removing film, do not pull the film straight down as this could result in misaligned doors.
NE ILG HS
PAGE 5 • SET UP & USE
Loading...