Instruction Manual
2. Accessories
Charger Rechargeable
Input: DC 5V
Output: DC 4.2V
Battery
Type:18350
USB Cable
Heavy Counter-Weight
Weight:52 g
Light Counter-Weight
Weight:6 g
1mm Counter-Weight
Weight:8 g
3-Axis Handheld Gimbal for iPhone
iPhone 6s Plus / 6s / 6 Plus / 6
iPhone 5s / 5C / 5 / 4s / 4
1. Product Overview
Rolling
Panning
Joystick
Function Button
( On/Off )
(Indicator light)
Tilting
Rolling Axis
1/4 inch Screw Hole
Function
Interface
Tilting Axis
Panning Axis
How to Charge
USB Cable
Charger
5V USB
Power Adapter
(Equipped by users)
3. User Guide
!
Attention !
1
Remove the power switch cap, and
insert two 18350 batteries into the handle.
3
Adjust the phone position and install the counter-weight
1mm Counter-Weight 1mm Counter-Weight
iPhone 6s
(1) Please install the iPhone before powering on the gimbal.
(2) Please turn off the power when not in use.
18350
18350
Install the batteries
Light
iPhone 6s Plus
0 mm
2
Attach the iPhone by the quick-release adapter,
and ensure it is secure.
Note: Please take off the protective casing of the
phone before installation.
Heavy
0 mm
Connect the Mini-USB
port of the USB cable with
the charger, and the USB
port with 5V USB power
adapter.
Install the phone
iPhone 5
iPhone 4
Light
9 mm
LED status Explanation
Blue light flashes for three times
Blue light flashes twice
Blue light flashes once
Blue light keeps flashing
When the red LED indicator light flashes
in use, it means the gimbal is out-of-order
Full Power
Enough Power
Low Power
No Power
LED indicator light
4. Operating
Function Button
( Indicator Light )
Power on / Power off
Switch the working mode
Realize other functions
Identify the current mode of the
gimbal by the indicator lights
Explanation of LED indicator status Explanation of joystick control
LED status Mode / Status
Single flash
Double flashes
Three flashes Standby
Always on
Flash quickly
Panning mode
Panning and Tilting mode
Lock mode / Initialize the gimbal
Rolling angle adjustment /
Initialization failure / Malfunction
Operating Instructions of Function Button
Operation
Single tap
Double tap
Triple tap
Quadruple tap
Tap button for six times
Long press for 1 second
Long press for 3 seconds
Function
Panning Mode / Lock Mode
Panning and Tilting Mode
Inversion Mode
Reset
Rolling angle adjustment
Standby
Power off
Working Modes
Panning Mode
The phone is allowed to pan left or right. Vertical tilts or rolls are restricted.
Panning and Tilting Mode
The phone is allowed to pan left or right and tilt up and down. Rolls are restricted.
Lock Mode
The phone stays in its current orientation. All panning, tilting and rolls are restricted.
Other Functions
Inversion Mode
Three working modes can be switches under inversion mode. After entering into the inversion mode, the
gimbal automatically switches to the panning mode.
Invert the gimbal, put the camera face down to capture the wonderful moments.
The gimbal can restore to the boot-up state by consecutively pressing the function button for three times
under inversion mode.
Manual Pulling Locking
After the gimbal being powered on for eight seconds, pull the tilting axis to the desired angle under non
panning and tilting mode and wait for 0.5 second until the gimbal registers the new angle.
Reset
Reset the tilting axis of the gimbal to initial orientation and initial mode.
Standby
In standby model, keep the gimbal in power-up state, the motor stops working, the indicator light flashes
for three times, and single tap again to wake the gimbal.
Joystick
for
Direction
Control
Mode
Panning mode
Panning and
Tilting mode
Lock mode
Controllable
angle of joystick
Tilting angle
Uncontrollable
Tilting and
panning angle
Explanation
Single tap to switch between panning mode and
lock mode
Under panning and tilting mode, single tap to switch
to lock mode
It is possible to switch to other modes under
inversion mode, triple tap again to exit inversion
mode and reset
Reset the tilting axis of the gimbal to initial
orientation and initial mode.
Please refer to“Gimbal Horizontal Angle Adjustment”
for operations
Single tap again to awake the gimbal, or triple tap
to initialize the gimbal
Movement
of joystick
Up, Down
Uncontrollable
Up, Down, Left, Right
Light
iPhone 6
0 mm
How to install iPhone6s / 6
Use the light counter-weight,
attach the bottom of the phone to
the motor of tilting axis.
iPhone 6 Plus
How to install iPhone 6s Plus / 6 Plus
Use the heavy counter-weight,
attach the bottom of the phone to the
motor of tilting axis, as shown in the
picture.
4
Power on / off
Power On: Single tap the function button, the gimbal shall be powered on after 2 seconds.
Power Off: Hold down the function button for three seconds to turn off the gimbal.
Attention: Turn the gimbal on after ensuring the phone is secure.
Heavy
0 mm
How to install iPhone 5s / 5c / 5 / 4s / 4
Use the light counter-weight, leave
distances of about 9mm between
the bottom of phone and the motor
of tilting axis, as shown in the picture .
5. Gimbal Horizontal Angle Adjustment
The horizontal angle needs to be adjusted whenever the following situations happen to the gimbal, user can
adjust the horizontal angle by gimbal initialization and joystick.
(1)The tilt angle is not leveled with the horizontal surface.
(2)The roll angle is not parallel to the horizontal surface.
(3)Under lock mode, the panning angle drifts.
Adjusting steps:
Initialize the gimbalSTEP 1
( 1 ) After powering the gimbal on, hold down the function button for one second to enter standby mode, and the LED
indicator shall flash for three times;
( 2 ) Consecutively tap the function button for three times, LED indicator shall be always on, place the gimbal on a flat
surface and keep it stationary;
( 3 ) When the initialization is completed, the LED indicator will flash for three times.
When the initialization failed, the LED indicator will flash quickly, repeat step (2) & (3) to reinitialize.
After finished the , the rolling angle still not parallel to the horizontal surface, you can use the joystick
to adjust the rolling angle according to .
STEP 2
Tap button for six times for roll angle adjustment, the tilt and roll angle restore to the horizontal status. Under the roll
angle adjustment state, move the joystick to the left or to the right to adjust the roll angle, single tap again to save the
setting and exit after adjusting.
STEP 1
Rolling angle adjustment
STEP 2
6. Parameters
Vertical Titling Angle
Rolls Angle
Horizontal Panning Angle 360°
Titling Increments 2°/s ~ 75°/s
Panning Increments 3°/s ~ 150°/s
Usage time 4 Hours
Adaption iPhone 6s Plus / 6s / 6 Plus / 6 / 5c / 5s / 5 / 4s / 4
Weight
G4 Pro 3-Axial handheld gimbal for iPhone is an excellent camera stabilizer, lightweight and portable.
Prohibit any user for any illegal purpose. Users will be responsible for all behaviors of purchase and use products.
The Company assumes no liability for any risks related to or resulting from the debug and use of this product
(including the direct, indirect or third-party losses).
For any unknown sources of using, we will not be at any services.
Feiyu Tech reserves the right to amend this manual and the terms and conditions of use the gimbal at any time.
Attention
Please correctly assemble the gimbal in accordance with the diagram.
Please install the camera before powering on the gimbal.
Please charge the battery with the standard charger.
When the gimbal is not in use or placed on the table, please ensure it is powered off.
Scan and keep
an eye on FY
320°
100°
315g(not including batteries, phone, or counter-weight)
Heavy Counter-weight 52g Light Counter-weight 6g
DISCLAIMER
Please visit the official website of Feiyu Tech
to get related information: www.feiyu-tech.com
Support email: service@feiyu-tech.com