3-Axis Video Stabilized Handheld Gimbal for iPhone
iPhone 7 Plus / 7 / 6s Plus / 6s / 6 Plus / 6 / SE / 5s / 5c / 5
Guilin Feiyu Technology Incorporated Company
V 2.0ENUser Manual
1. Product Overview
The showing smartphone is only for reference
*
Knob ring
Tilting axis
Rolling axis
Smartphone adapter
Bluetooth
shutter
1/4 inch screw hole
Status indicator
Joystick
Function
button
1/4 inch
screw hole
Trigger button
Panning axis
USB port
Handle
1
Trigger Button
Long press
Lock Mode
Water Splash Proof
Long press +
joystick up and down
Control the App Lens Zoom
Double tap
Panning Reset
2
Trigger Button
*Never submerge the gimbal in water
Package List
Portable bag X1 Compatible
Enclosed:
How to use the compatible accessories
USB cable X1
accessoriesX2
Small camera
( For reference )
Battery
(Type:22650)X1
After installation:
3
2. User Guide
1
Install the battery
Remove the handle and insert one
22650 battery into it.
4
2
Install the smartphone
Attach the smartphone with the
quick-release adapter, and ensure
it is secure.
Tips: Please take off the protective casing
of the smartphone before installation.
!
Attention !
(1) Please install the smartphone before powering
on the gimbal
(2) When not in use, turn off the gimbal and then
remove the smartphone
3
Balance Adjustment
How to balance adjustment
Knob ring
If the smartphone tilted to the left, then loose the knob
ring, move the cross arm to the right, try to adjust to the
best balance and tight it.
T
Cross arm
T=Tight
L=Loose
L
4
Power on / off
Power on: Long press function button and release
it until the green light is on.
Power off: Long press function button and release
it until the red light changes from quick flashing to
constant.
Knob ring
If the smartphone tilted to the right, then loose the
knob ring, move the cross arm to the left, try to adjust
to the best balance and tight it.
T
L
Cross arm
Best Balance
Attention: Make sure the smartphone is secure
before power on the Gimbal.
In case of low battery, the indicator will
!
flash red 3 times every 5 seconds. Please
charge SPG or replace the battery.
5
3. Download and connect App
1
Download App
Download "Feiyu ON" and install it.
(1) iOS version:
(2) Android version:
Feiyu ON
App Store
2
Connecting App
Feiyu ON
GuiLin FeiYu Technology Incorporated Company
Download
Google play
Feiyu ON
Feiyu ON
GuiLin FeiYu Technology Incorporated Company
*Please scan the two-dimensional code
via the browser.
Start the App on your smartphone,follow the instructions to connect the smartphone with gimbal via bluetooth.
A
SPG series
SPG
Connect
6
SPG series
FY_SPG _XX
Choose a gimbal
FY_XXX_XX
FY_XXX_XX
FY_XXX_XX
α2000
Connect
×
PHOTO
TIME-LAPSE
L
S
O
M-O
FANC
VIDEO
SQUARE
Download
4. Mode / Function Operation Instructions
Function Button
Single tap
Double tap
Triple tap
Quadruple tap Reset
Long press until
the red light
flashes quickly
Trigger Button
Long press
Long press +
joystick up and down
Double tap
Function
Panning Mode / Lock Mode
Panning and Tilting Mode
Rotate 180°in horizontal
Standby
Function
Lock Mode
Control the App Lens Zoom
Panning Reset
Explanation
Single tap to switch between panning mode and lock mode
Under panning and tilting mode, single tap to switch to lock mode
Make the lens rotate 180 °
Reset the tilting axis of the gimbal to initial orientation and
Single tap again to awake the gimbal, or triple tap to initialize the gimbal
initial mode
Explanation
Enter the lock mode, release it to return to before mode
Joystick up and down to control the App lens zoom;
left and right to control the panning
Restore the initial follow state of the panning
7
5. Operation
Function Button
Status
indicator
Power on / off
Switch the working mode
Other functions
Identify the current mode of the
gimbal by the indicator
Bluetooth shutter
Bluetooth name: FY_SPG_xx
Tips: App or Bluetooth connection, you can click the
Bluetooth shutter to shoot.
Explanation of LED indicator status Vertical Shooting
Indicator
Blue light flashes twice
8
status Mode / Status
Blue light flashes once
Blue light flashes for three times
Blue light keeps flashing Initialization failure / Malfunction
Red light keeps flashing
Panning mode
Panning and Tilting mode
Standby
Lock mode / Initialize the gimbalBlue light constant on
Low battery Red light flashes three times
Entering standby /
Entering power off
Explanation of joystick control
Up
Right
Left
Down
6. Charging
* Please make sure the battery was fully charged before you power on the gimbal first time.
Option 1: charging with micro USB cable.
micro USB cable
equipped by user
Output：5V/1A
Option 2: remove the battery and charge the battery with charger(equipped by user).
9
7. Firmware Upgrade
(1)
Option 1: connect the gimbal with PC via micro USB cable, and then upgrade the firmware.
Please visit the official website www.feiyu-tech.com to download the relevant programs for upgrading,
including USB driver, firmware upgrade software and product firmware,and install the relevant software,
decompress the firmware files for standby application.
Upgrade........
micro USB cable
PC
Option 2: connect the gimbal with smartphone via bluetooth, and then upgrade the firmware.
(2)
Settings Updata
The current used version 1.7.2,
new firmware is available,
do you want to upgrade?
Download
Later
Feiyu ON
10
and install it.
Firmware upgrade
new firmware is available,
do you want to upgrade?
×
Yes
No
8. Gimbal initialization
You can initialize your gimbal when:
（1） when smartphone is not level
（2） if not used for a long period of time
（3） in case of extreme temperature variations
Adjusting steps:
Red light
flashes
press and
hold
1
Long press function button and release it
until the red light flash，the gimbal enter
the standby mode,the blue light will flash
3 times periodically.
Blue light is on
Triple tap
2
Lay the gimbal on a static flat surface and triple tap the
function button. Initialization is successful when the
blue light changes from constant on to flashing 3 times
periodically, otherwise fail.
Single tap
3
Click again to wake up the gimbal.
11
9. Parameters
98.7mm
116mm
268.5mm
86.3mm
Titling Angle 320°
Rolling Angle 320°
Panning Angle 360°
Tilting Increments 2°/s ~ 75°/s
Panning Increments 3°/s ~ 150°/s
Usage Time 7 Hours
Adaption
Weight
12
65.4mm
iPhone 7 Plus/7/6s Plus/6s/6 Plus/6/SE/5c/5s/5(Adaptation of similar size mobile phone)
350g （not including battery and smartphone ）
D I S C L A I M E R
Prohibit any user for any illegal purpose. Users will be responsible for all behaviors of purchase and
use products.
The Company assumes no liability for any risks related to or resulting from the debug and use of this
product (including the direct, indirect or third-party losses).
For any unknown sources of using, we will not be at any services.
The updating and changes of product firmware and program may cause changes in function
descriptions in this user manual, please read the instructions carefully before upgrading the firmware
and use the corresponding user manual.
You can get the latest user manual from the official website: www.feiyu-tech.com
Feiyu Tech reserves the right to amend this manual and the terms and conditions of use the gimbal at
any time.
Attention
Please correctly assemble the gimbal in accordance with the diagram.
Please install the iPhone before powering on the gimbal.
When the gimbal is not in use or placed on the table, please ensure it is powered off.
13
Guilin Feiyu Technology Incorporated Company
Due to software and hardware improvements, your actual product might differ from the descriptions
and pictures in this user manual. You can get the latest user manual from the official website.
For more information, please visit our official website
Loading...