Feiyutech G4 Plus User Manual

G4 Plus 3-Axis Handheld Gimbal for Smartphone

G4 Plus compatible with iPhone 6s Plus/ 6s / 6 Plus / 6 / 5s / 5c / 5 / 4s /4 and other smartphones with similar dimensions

Version 1.0

Optional Accessories

User Guide

Tilting

Axis

Standard Installation Method

Light

iPhone 6s

iPhone 6

0 mm

iPhone 6s / 6 Installation

Use Light Counter Weight

Product Overview

iPhone 5

iPhone 4

Attention !

(1) Please install the suitable smartphone first before power on the gimbal. (2) Please turn off the power when not in use.

Insert The Batteries

Remove the power switch cap, insert two batteries into the handle.

Adjust The Center of Gravity

If the smart phone inclines towards the tilting axis, pull it towards the left to be in place, and let the center of gravity keep balance or slightly incline to the smart phone. If the smart phone still inclines towards the pitch axis, install the clump weight.

* *

Light

9 mm

iPhone 5s / 5C / 5 / 4s / 4 Installation

Use Light Counter Weight

iPhone 6 Plus

iPhone 6s Plus / 6 Plus Installation

Use Heavy Counter Weight

Heavy

0 mm

Tilting Axis

Tilting

Axis

Indicator

Install The Smartphone

Install the Smart phone by the quick-release adapter. And make sure it is fixed well.

Choose The Suitable Counter Weight

If the smartphone still leans to the tilting axis direction, after adjust the center of gravity, please replace the counter weight cover with the counter weight module. Please refer to the left showing photo. Try to keep the center of gravity balance after mounting the counter weight module.

Power On/Off

Check whether the phone is installed well, and long press the function button for two seconds to turn on the gimbal. Long press the function button for three seconds to turn off the gimbal.

Charger

Input: DC 5V Output: DC 4.2V

Operating

Rechargeable Battery

Type: 18350

USB Connector

Function Button

Identify the working mode via switch to different status of the indicator light.

Use for switching working modes.

USB Cable

Basic Working Modes

Panning Mode

Panning and Tilting Mode

Lock Mode

The smart phone is allowed to pan left or right. Vertical tilts or rolls are restricted.

The smart phone is allowed to pan left or right and tilt up and down. Rolls are restricted.

The smart phone stays in its current orientation. All panning, tilting and rolls are restricted.

Heavy

Counter Weight

Light

Counter Weight

Weight: 6 gWeight: 52 g

Other Functions

Special Working Condion （Inversion Mode）

Under any working mode, consecutively press the function button for three times, the gimbal enters into the inversion mode and automatically switches to the Panning mode. Invert the gimbal, put the camera face down, and combine with the three working modes of handheld gimbal to capture the wonderful moments. The gimbal can restore to the boot-up state by consecutively pressing the function button for three times under inversion mode.

Manual Pulling Locking

mode and lock mode. Adjust the tilt angle to the desired position and wait for 0.5 second until the gimbal registers the new angle.

Reset

Consecutively press the function button for four times to restore to the boot-up state.

After the gimbal has been powered on for eight seconds, the tilt angle can be adjusted manually in the panning

Function Button Operation Instructions

Operation

Single tap

Double tap

Triple tap Single Flashes Inversion Mode

Quadruple tap

Long Press For 3 Second

【 Lock Mode 】

LED Status

Single Flashes / On Constantly

Double Flashes

Single Flashes

Under any working mode, single tap the function button, the indicator LED is always on, the Gimbal can be enter the 【 Lock Mode 】. During the LOCK MODE other operation is arbitrary.

Function

Panning Mode / Lock Mode*

Panning and Tilting Mode

Reset

Standby

Remark

Single tap to switch between panning mode and lock mode.

Under panning and tilting mode, single tap to switch to lock mode

Can switch in other mode, or trip again to exit and reset

Reset the tilting axis of the gimbal to initial orientation and initial mode

Single tap again to activate

Panning Axis

Function Button

Power Switch

Rolling Axis

Function Interface

Indicator Explanation

LED Status

Blue light flashes three times

Blue light flashes twice

Blue light flashes once

Blue light keeps flashing

When the red LED indicator light flashes

in use, it means the gimbal is out-of-order

Explain

Full Power

Enough Power

Low Power

No Power

Firmware Upgrade And Other Settings

Please

Remove The Batteries Before Upgrading

Function Interface

USB Cable USB Connector

Attention: Be sure to connect the computer with the USB connector

Upgrade........

Firmware Upgrade Instruction

Please visit the official website of Feiyu Tech: www.feiyu-tech.com to download the USB driver, firmware upgrade software and the latest firmware then unzip the RAR file.Remove the batteries and refer to the connection diagram to connect the gimbal with the computer. Please refer to the manual of update operation to upgrading,otherwise the Gimbal will be abnormal.

Attention : Please be sure to connect the computer with the USB connector.

Gimbal Calibration

The Gimbal attitude can be calibrate through parameter setting software. User can adjust the pitch and roll in a small angle to achieve more accuracy filming scene. Please insert the batteries then refer to the connection diagram to connect the gimbal with the computer for caliration.

Attention : Please be sure to connect the computer with the USB connector.

Initialize The Gimbal

Initialization Instructions

1. Install the smartphone properly.

2. Gimbal placed on stationary flat and keep motionless.

3. Power on the Gimbal.

4. The Gimbal is activate and it will initialize automatically. Pick up the Gimbal to work normally.

( Please pick up the gimbal quickly once it is activated. )

Gimbal needs to be initialized whenever the following situations appear after power on

1. After power on, the angle of pitch is not level with the horizon line.

2. After power on, the angle of roll is not parallel with the horizon line.

3. When the gimbal is in heading static, the angle of heading moves frequently.

Remote Control (Optional)

Wireless Remote Control

Joystick

Function Button

Wireless

remote control

Power on / off

Operation

Long press for 0.5 second Long press for 3 second

after single tap

Function

Interface

Power

OFF

Receiver

for wireless

remote control

Please install

the receiver properly before power on

Remote Control Operation Instructions

Operation

Single Tap

Double Tap

Triple Tap

Quadruple Tap

Tap Button Six Times

Tap Button Seven Times

Long Press For 3 Second

Note: The function button will be disabled after connecting with the remote control.

Explanation

Panning Mode / Lock Mode

Panning and Tilting Mode

Special Working Condition （Inversion Mode）

Reset (Restore to the boot-up state)

Calibration Using Remote Control

Match Code Mode

Power off

Wireless RC

Long-distance mode switch of gimbal and manual control of angle can be realized by remote control

Function Interface

Direction Button of The Wired Remote Control

Down

Steps to connect wireless remote control:

Open the wireless remote control.

Install the receiver for wireless remote control: Insert the receiver

for wireless remote control into the function port of gimbal . Open the gimbal.

Use the wireless remote control to control the gimbal.

Charging

Remote Control Distance

Match Code

Keep the gimbal powered on, restart the remote control and connect the receiver of RC to the gimbal, press the remote control function button for 7 times in 5 seconds, if the indicator on the RC flashes 5 times it means the receiver and the transmitter of RC match successfully, then customer can control the gimbal by the RC.

▲ RC needs to be match code whenever the following situations：（1）Connecting properly but still control in fail.

（2）Change the receiver or wireless remote control.

Connect the Micro interface of wireless remote control with 5V charger by USB cable.

15 meters in an open environment.

Remark

Single tap to switch between panning mode and lock mode

Under panning and tilting mode, single tap to switch to lock mode

Can switch in other mode, or trip again to exit and reset

Reset the tilting axis of the gimbal to initial orientation and initial mode

Exit calibration and enter standby. Wake the gimbal by pressing the function button once again

Match code when connecting properly but still control in fail or change the receiver/wireless remote control

Motionless Flat Surface

Wired Remote Control

USB Cable

Left

Right

Function Button

Direction Button

Battery Extender Accessory (Optional)

Battery extender contents:

Handle

Battery Extender Handheld Accessory

Extension Bar Instructions (Optional)

Rechargeable Battery

Type: 18650

Charger

Type: 18650

Input: DC 5V Output: DC 4.2V

Battery Extender Connection Picture

Extension Bar Diagram

With the special designed switch, the extension bar can be added directly. Allows to shoot the distance images more easily. Special design allows for flexible extension.

Another way for extension is adjustable extension bar.

Adjustable Extension bar

Specification

Vertical Tilting Angle

Rolls Angle

Horizontal Panning Angle

Tilting Increments

Motion Attitude Tracking Accuracy

320°（Maybe have some difference in different smartphone）

100°

320°

3°/S ~ 150°/SPanning Increments

0.1 ~ 0.5 (Motor Overload<2G)

DISCLAIMER

FY G4 Plus 3-Axis Handhled Gimbal for smartphone is an excellent stabilizer, yet lightweight and portable.

Prohibit any user for any illegal purpose. Users will be responsible for all behaviors of purchase and use products.

The Company assumes no liability for any risks related to or resulting from the debug and use of this product (including the direct, indirect or third-party losses).

For any unknown sources of using, we will not be at any services.

Feiyu Tech reserves the right to amend this manual and the terms and conditions of use the gimbal at any time.

Static Attitude Tracking Accuracy

Working Voltage

Overload Current Protection

Usage Time 2 ~ 3 Hours2°/S ~ 75°/S

Adaptation

Weight

0.01 ~ 0.05 (Gimbal in static state)

6.0 V ~ 9 V

800 mA

iPhone 6 Plus/6/5s/5c/5/4s/4and

other smartphones with similar dimensions

365g（Without batteries & smartphone）

Counter weight 52g

ATTENTION

Please assemble the gimbal in accordance to the diagram provided .

Please upgrade the firmware and configuration settings with the provided USB data cable.

Please charge the battery with the provided battery charger.

Please install the camera securely before powering on the gimbal.

When the gimbal is not in use or placed on the table, please ensure it is powered off.

Please visit the official website of Feiyu Tech to get related information: www.feiyu-tech.com

Technical support: service@feiyu-tech.com

Battery Extender Handheld Accessory

Everyone

Can Make a Movie

Power Switch