Page 1
Correct Method For Using USB Data Cable
Battery Charging:
Connect The Computer:
Put the Mini-USB terminal of the USB
cable into the Mini-USB interface of the charger and the
USB terminal to the power adapter, optional connect to
the EU Connector.
Please remove the batteries first,
then insert the Mini-USB terminal into the function interface on the
Gimbal and the USB terminal to the USB connector. Afterwards
connect the device with the computer to do firmware updates or
parameter configuration. (Please connect the USB cable to the
computer with the USB connector, otherwise the interface of
the computer will be damaged ).
Further information can be found in the chapter of the
Function Interface Instructions.
Name
Remote
Control
Battery
Extender
Extension
Bar
Realize the heading & pitch angle adjustment,
mode switching, level calibration and heading
follow speed configuration from a distance.
Extend the capacity space for battery to
make the runtime longer.
Spiral design of the extension bar can be
perfect combination with G4 power switch；
Extended length is optional, it will help to
enjoy a different visual easily.
Function Description
Please refer to the method of proper usage
mentioned below. Otherwise the device
itself or other equipments can be damaged
Optional Accessories
!
Function
Button
Power
Switch
Pitch Axis
Roll Axis
Indicator
Heading Axis
The indicator flashes in red light
when in working, it will prompt the
Gimbal at fault.
Please install the suitable camera first before power on the Gimbal.
Attention !
How To Adjust The Pitching Angle:
Double press the function button to enter into“Heading And Pitch Follow Mode”.
Hold the Gimbal at the desired angle, then press the button once to reengage “Heading Follow Mode” in order to lock the
angle of desired pitch.
Smooth And Steady Filming:
Handheld the Gimbal, keep stable for movement, keep light and steady for walking.
Selfie:
Turn the Gimbal 180°so the function interface is facing you. Then, simply adjust the angle of pitch to the desired
angle by utilizing the “Heading And Pitch Follow Mode”which described above and then switch back to “Heading
Follow Mode”. Once complete you can film yourself with ease.
1
Beginner Guide
2
Product Appearance Instructions
Indicator Explanation
LED Status
Explain
Blue light flashes
three times
Full Power
Blue light flashes
twice
Enough Power
Blue light flashes
once
Low Power
Blue light keeps
flashing
No Power
If any comments or suggestions please do not hesitate
to e-mail us directly : service@feiyu-tech.com
Remove the power
switch cap, insert two
18350 batteries into
the handle.
Install the sports camera by the
special Thumb Screw. And make
sure it is fixed well.
Power On
Confirm the camera
is installed well, then
press the power
button to turn on
the Gimbal.
Mode Switching
When the Gimbal is working,
you can press the function
button to switch among the
three working modes and a
special working condition.
( Details of working modes please
refer to the instructions of
working modes )
Insert The Batteries Install The Camera
FEIYU-EN-1
EN
4
Standard And Optional Accessories
Operation Instructions
3
Special Working Condition (Inversion Mode)
When in any working mode, press the function button for three times in succession, the
Gimbal will enter into the inversion mode and switch to the Heading following mode automatically. Invert the Gimbal to capture more excited
scenes easily by switching mode combination. When in inversion working condition press the function button for three times in succession to reset
the Gimbal back to the original state.
Manual Pulling Locking
The pitching can be adjusted 8 seconds after the Gimbal has been started. Within the Heading Follow and Heading
Lock Mode the pitching can be adjusted to the desired angle manually, wait in this position up to 0.5 second until the current angle is adjusted.
Standby Mode
Press the function button for 3 seconds, then the motor will stop working and the LED of the function button will light constantly.
This indicates that the Gimbal is in the standby mode. Single press the function button the Gimbal will be awakened immediately.
Function Button Working Mode Instructions
Operation
Double Press
Single Press
Long Press
For 1 Second
LED Status
Single Flashes
Double Flashes
On Constantly
Function Explanation
Operation Again
Function Of Operation Again
Heading Follow Mode
Heading And Pitch Follow Mode
Three Press Three Press again
Other operation is arbitrary
Other operation is arbitrary
Other operation is arbitrary
Single Flashes Inversion Mode Exit inversion mode to original state
Lock Mode
Function Button Instructions
Heading, Pitch and Roll are all locked to point at
Use for switch
the working
mode and
realize other
function
The working mode and function
can be identified by the LED status
Heading Follow Mode
Camera Pitch and Roll Angles remain
Heading And Pitch Follow Mode Camera Roll Angle remains
Lock Mode
Roll
Pitch
Heading
constant, heading follows the handheld position.
constant. Heading and Pitch follow the handheld position.
one position.
Sports Video Camera
Gimbal For Sony
Suitable for SONY FDR-X1000V and AS series sports cameras
Function
Interface
For SONY Sports Video Camera
Charger
Input: DC 5V
Output: DC 4.2V
USB Cable
USB Connector
Standard Accessories
Type: 18350
Rechargeable
Battery
USB
Mini-USB
Page 2
8
Initialize The Gimbal
5
Function Interface Instructions
6
G4 Remote Control Instructions (Optional Item)
7
Extension Bar Instructions (Optional Item)
9
Specification
Please visit the official website of Feiyu Tech: www.feiyu-tech.com to download the USB driver, firmware upgrade software and the latest
firmware then unzip the RAR file.Remove the batteries and refer to the connection diagram to connect the gimbal with the computer.
Please refer to the manual of update operation to upgrade, otherwise the Gimbal can not work normally.
The heading follow speed can be configurated through parameter setting software. Users can adjust to the desired following speed mode
according to the requirements of filming scene. Three modes for optional: “SLOW” mode, “NORMAL” mode , “FAST” mode.
Default setting is “NORMAL” mode.
The Gimbal attitude can be calibrated through parameter setting software. Users can adjust the pitch and roll in a small angle to achieve more
accuracy filming scene. Please insert the batteries then refer to the connection diagram to connect the gimbal with the computer for calibration.
Firmware Upgrade Instruction
Parameters Configuration
Gimbal Calibration
Working Voltage
Static Attitude Tracking Accuracy
Motion Attitude Tracking Accuracy
Overload Current Protection
Pitch Angle
Roll Angle
Heading Angle
Heading Angle
Pitch Following Rate
Heading Following Rate
Weight
Gimbal In Static Mode
Motor Overload<2G
Handheld In Horizontal
Handheld In Horizontal
Handheld In Vertical
Without Batteries & Camera
6.0V
0.01
0.1
-160（Down）
-70
-160（Left）
-50
2°/ Sec
3°/ Sec
270g
8.4V
0.02
0.2
800mA
0（Horizontal）
0（Horizontal）
17.0V
0.05
0.5
+160（Up）
+70
+160
+50
75°/ Sec
150°/ Sec
Motionless Flat Surface
1. Install the camera properly.
2. Place the Gimbal on stationary flat and keep motionless.
3. Power on the Gimbal.
4. The Gimbal is activated and it will be initialized automatically.
Afterward pick up the Gimbal and start working with it.
Initialization Instructions
FY-G4 needs to be initialized whenever the
following situations appear after power on
Function
Interface
With the special designed switch, the extension bar can be added directly. Allows to shoot the distance
images more easily. Special design allows for flexible extension.
Items Min Standard Max Remarks
USB Cable
USB Connector
Attention : Please make sure that the connection to the computer is done by the USB connector.
Attention : Please make sure that the connection to the computer is done by the USB connector.
Attention : Please make sure that the connection to the computer is done by the USB connector.
Aenon: Make sure that the connecon to the computer is done by the USB connector
1. After power on, the angle of pitch is not level with the horizon line.
2. After power on, the angle of roll is not parallel with the horizon line.
3. When the gimbal is in heading lock, the angle of heading moves frequently (heading is not stationary).
350mm
Φ23mm
Extension Bar Diagram
Upgrade........
PC
Angle Control
Remote Control
Function
Interface
USB Data Cable For RC
Within the Heading Follow Mode and Heading Lock Mode, pitch angle can be controlled by the“UP”and “DOWN”
button on the G4 Remote Control.
Within the Heading Lock Mode, Heading angle can be controlled by the“LEFT”and“RIGHT”button .
Function
Button
Direction
Button
Note:
The function button on the Gimbal will be disabled after connect the G4 Remote Control
The LED of the function button will fast flashing
if the initialization succeed.
Note:
UP LEFT RIGHTDOWN
Direction Button
Connect the G4 Remote Control
to the function interface
G4 Remote Control Connection Diagram
G4 Remote Control Operation Instructions
Operation
Double Press The Function Button
Single Press The Function Button
Long Press The Function Button
For 1 Second
Function Explanation
Operation Again Function Of Operation Again
Heading Follow Mode
Heading And Pitch Follow Mode
Three Press The Function Button Three Press again
Other operation is arbitrary
Other operation is arbitrary
Other operation is arbitrary
Inversion Mode
Exit inversion mode to original status
Heading Lock Mode
Single press again
Exit standby mode ,
and awaken immediately
Long Press The Function Button
For 3 Second
Standby Mode
FY G4 GS 3-Axis Handhled Gimbal is a feature-rich camera stabilizer,
yet lightweight and portable.
DI SCLA IMER
ATTENTION
Please visit the official website of Feiyu Tech
to get related information: www.feiyu-tech.com
Technical support: service@feiyu-tech.com
Please assemble the gimbal in accordance to the diagram provided .
Please upgrade the firmware and configuration settings with the
provided USB data cable.
Please charge the battery with the provided battery charger.
Please install the camera securely before powering on the gimbal.
When the gimbal is not in use or placed on the table, please
ensure it is powered off.
Prohibit any user for any illegal purpose. Users will be responsible for
all behaviors of purchase and use products.
The Company assumes no liability for any risks related to or resulting
from the debug and use of this product (including the direct, indirect or
third-party losses).
For any unknown sources of using, we will not be at any services.
Feiyu Tech reserves the right to amend this manual and the terms and
conditions of use the gimbal at any time.
Everyone
Can Make a Movie
Loading...