Table of Contents |
|
|
• Notes Before Use ................................................... |
2 |
|
|
Notes on charging your watch.......................................... |
2 |
• Your Watch.............................................................. |
4 |
|
• Name of Components............................................ |
6 |
|
|
About the crown ............................................................... |
7 |
• |
Setting the Time and Calendar ............................. |
8 |
|
1) Setting the time and day .............................................. |
8 |
|
2) Setting the date.......................................................... |
10 |
• |
Troubleshooting................................................... |
13 |
• |
Precautions........................................................... |
14 |
• |
Specifications....................................................... |
24 |
1
English
Notes Before Use
Notes on charging your watch
This watch has a rechargeable cell which is charged by exposing the dial to light such as direct sunlight or fluorescent lamps.
2
For optimal performance |
English |
|
•Expose the watch with the dial towards direct sunlight for several hours at least once a month.
•After taking off the watch, put it in a position so that the dial is exposed to bright light, such as by a window.
•Before storing the watch in a dark place for an extended period of time, be sure to charge it fully.
When the watch is regularly covered with long sleeves, it may not be charged sufficiently. Try to keep the watch exposed to light sufficient for charging. Do not charge the watch at a high temperature (about 60°C/140°F or higher).
3
Your Watch
Eco-Drive (solar powered) watch
The watch operates by converting sunlight and other light into electrical energy. Once the rechargeable cell is fully charged, the watch will function for approximately 6 months.
Insufficient charge warning
If the power becomes very low, the second hand advances at 2-second
intervals, indicating that charging is necessary. When the second hand
starts to advance at
2-second intervals, expose the watch to light until it is fully charged.
If the watch is not exposed to light within approximately 4 days after the insufficient charge warning starts, the watch will stop.
4
Quick start function
When the stopped watch is exposed to light, it starts operating again immediately.
After quick start, expose the watch to light until it is fully charged. Set the correct time before using the watch.
Overcharging prevention |
English |
|
|
function |
|
Once the watch is fully charged, an overcharging prevention function will automatically activate so that it is not charged any further.
No matter how much the watch is charged, it will not affect the rechargeable cell, time accuracy, functions or other performance.
5
Name of Components
|
|
|
Minute hand |
Hour |
|
|
Date hand |
|
|
|
|
hand |
|
|
Crown |
|
|
|
|
Day |
|
|
Normal position ( 0 ) |
|
|
Position 1 ( 1 ) |
|
hand |
|
|
|
0 |
1 |
2 |
Setting the date |
|
|
|
Position 2 ( 2 ) |
|
|
|
Setting the time |
Second |
|
|
and day |
|
|
|
|
hand |
|
|
|
The illustrations shown in this manual may differ from the actual watch you have purchased.
6
About the crown
Some models use screw down system for the crown. Accidental operations can be prevented when the watch is not being operated by locking the crown. To operate the watch, release the lock.
Before operation
Unlock the crown
Rotate the crown to the left (counterclockwise).
When the screw lock is released, the crown extends to the normal position.
After operation
Lock the crown
Press the crown and rotate it to the right (clockwise) to tighten the screw lock.
2 1
7
English
Loading...