Citizen FD1060-55A, FD1063-57X Instruction manual

0 (0)

INSTRUCTION MANUAL

Table of Contents

 

• Notes Before Use....................................................

2

 

Notes on charging your watch..........................................

2

• Your Watch..............................................................

4

• Name of Components.............................................

6

 

About the crown................................................................

7

Setting the Time and Calendar..............................

8

 

1) Setting the time and day...............................................

8

 

2) Setting the date..........................................................

10

Troubleshooting....................................................

13

Precautions...........................................................

14

Specifications.......................................................

24

English

1

Notes Before Use

Notes on charging your watch

This watch has a rechargeable cell which is charged by exposing the dial to light such as direct sunlight or fluorescent lamps.

 

 

Charging Time (approximate)

 

Charging

Charging time

Charging time

Time required

 

required to

required to

Environment

Environment

to reach full

maintain normal

return to normal

 

Illumination (lx)

charging after the

 

 

operation for

operation after

 

 

1 day

the watch stops

watch stops

 

 

 

Direct sunlight

100,000

2 minutes

50 minutes

13 hours

(Outdoors)

 

 

 

 

 

 

 

 

 

Cloudy (Outdoors)

10,000

10 minutes

5 hours

35 hours

 

 

 

 

 

Less than

 

 

 

 

20 cm from 30 W

3,000

35 minutes

17 hours

120 hours

fluorescent light

 

 

 

 

 

 

 

 

 

Indoor

500

3.5 hours

120 hours

800 hours

2

For optimal performance

Expose the watch with the dial towards direct sunlight for several hours at least once a month.

After taking off the watch, put it in a position so that the dial is exposed to bright light, such as by a window.

Before storing the watch in a dark place for an extended period of time, be sure to charge it fully.

When the watch is regularly covered with long sleeves, it may not be charged sufficiently. Try to keep the watch exposed to light sufficient for charging. Do not charge the watch at a high temperature (about 60°C/140°F or higher).

English

3

Your Watch

Eco-Drive (solar powered) watch

The watch operates by converting sunlight and other light into electrical energy. Once the rechargeable cell is fully charged, the watch will function for approximately 6 months.

Insufficient charge warning

If the power becomes very low, the second hand advances at 2-second

intervals, indicating that charging is necessary. When the second hand

starts to advance at

2-second intervals, expose the watch to light until it is fully charged.

If the watch is not exposed to light within approximately 4 days after the insufficient charge warning starts, the watch will stop.

4

Quick start function

When the stopped watch is exposed to light, it starts operating again immediately.

After quick start, expose the watch to light until it is fully charged. Set the correct time before using the watch.

Overcharging prevention function

Once the watch is fully charged, an overcharging prevention function will automatically activate so that it is not charged any further.

No matter how much the watch is charged, it will not affect the rechargeable cell, time accuracy, functions or other performance.

English

5

Citizen FD1060-55A, FD1063-57X Instruction manual

Name of Components

Date hand

Hour

 

 

 

Minute hand

 

 

 

 

hand

 

 

 

Crown

 

 

 

 

Day

 

 

 

Normal position ( 0 )

hand

 

 

 

Position 1 ( 1 )

 

0

1

2

(Setting the date)

Second

 

 

 

Position 2 ( 2 )

hand

6

 

 

(Setting the time

 

 

 

 

 

 

and day)

24 hour

 

 

 

 

 

 

 

hand

 

 

 

 

The illustrations shown in this manual may differ from the actual watch you have purchased.

6

About the crown

Some models use screw down system for the crown. Accidental operations can be prevented when the watch is not being operated by locking the crown. To operate the watch, release the lock.

Before operation

Unlock the crown

Rotate the crown to the left (counterclockwise).

When the screw lock is released, the crown extends to the normal position.

After operation

Lock the crown

Press the crown and rotate it to the right (clockwise) to tighten the screw lock.

2 1

English

7

Setting the Time and Calendar

1) Setting the time and day • The 24 hour hand moves together with the hour hand and minute hand

Pull out the crown

2

With the second hand in the 0-second position, pull the crown out two ‘steps’ to position 2.

Set the day

Rotate the crown to the right (clockwise) to set the day. (The day hand moves when

the hour hand is indicating between 0 a.m. and 5 a.m.)

8

Loading...
+ 18 hidden pages