Bosch Dishwasher, SHY66C, SHX99A, SHE66C, SHE99C Installation Instructions Manual

...

0 (0)

YOUR LIFE. OUR INSPIRATION.

Power

On/Off

Delay Start Hours

Top Rack Only

Cancel Drain

Power Scrub Plus

Scrub Wash

Regular Wash

Delicate/ Econo

Quick Wash

Rinse & Hold

Refill Rinse Agent

Cycle Countdown

Dishwasher Installation Instructions

Instructions d’installation du lave-vaisselle Instrucciones de instalación para lavavajillas

Use and Care Manual located on reverse side Tourner le guide pour les instructions d’utilisation et d’entretien Voltee el manual para encontrar las instrucciones de uso y cuidado

9000089901 (8506)

Table of Contents / Important Instructions

Table of Contents

Read these Installation Instructions completely and follow them carefully.

IMPORTANT INSTRUCTIONS ............................... 1

Tools Needed ......................................................... 2

Materials Needed ................................................... 2

Materials Supplied ................................................. 3

Enclosure Preparation ............................................ 4

Electrical Preparation ............................................. 5

Plumbing Preparation .......................................... 6-7

Dishwasher Preparation ...................................... 7-8

Door Panel Installation ........................................... 9

Placing the Dishwasher ........................................ 10

Securing the Dishwasher...................................... 10

Drain Hose Connection......................................... 11

Hot Water Connection ........................................... 12

Electrical Connection .......................................13-14

Door Tension Adjustment...................................... 14

Base and Toe Panel..........................................14-15

Final Instructions ................................................. 15

Customer Service ................................................ 16

Important Safety Instructions

WARNING

To avoid possible injury or property damage, OBSERVE ALL WARNINGS AND CAUTIONS. These instructions are intended for use by qualified installers only.

The dishwasher must be installed by a qualified service technician.

• In addition to these instructions, the dishwasher shall be installed to meet all electrical and plumbing codes and ordinances (both national and local).

Read these installation instructions completely and follow them carefully. They will save you time

and effort and help to ensure safety and optimum dishwasher performance.

If the dishwasher is installed in a location that experiences freezing temperatures (e.g., in a holiday home), you must drain all the water from the dishwasher’s interior. Water system ruptures that occur as a result of freezing are not covered by warranty.

IMPORTANT

• The dishwasher drain hose must be installed with a portion of it at least 20” (508mm) off the cabinet floor; otherwise the dishwasher may not drain properly.

• This dishwasher is intended for residential use only, and should not be used in commercial food service establishments.

• NEW INSTALLATION - If the dishwasher is a new installation, most of the work must be done before the dishwasher is moved into place.

• REPLACEMENT - If the dishwasher is replacing another dishwasher, check the existing dishwasher connections for compatibility with the new dishwasher, and replace parts as necessary.

• This appliance has been found to be in compliance with CAN/CSA-C22.2 No. 167/UL

749. It is the responsibility of the owner and the installer to determine if additional requirements and standards apply in specific installations.

Inspect the Dishwasher

After unpacking the dishwasher and prior to installation, thoroughly inspect the dishwasher for possible freight or cosmetic damage. Report any damage immediately. Cosmetic defects must be reported within 30 days of installation. NOTE: Do not discard any bags or items that come with the original package until after the entire installation has been completed.

TOOLS NEEDED

Tools and Materials Needed

Hammer Hole Saw

Tape Measure

Wire Cutter

Slot Screwdriver

Wire Stripper

Phillips Screwdriver

Drill

MATERIALS NEEDED

(Additional materials may be required to comply with local codes.)

Pipe Wrench

Adjustable Wrench

T-20 Screwdriver

Level

Electrical Supply Cable - Minimum #14 AWG, 2 conductor, 1 ground, insulated copper conductors rated 75°C or higher.

Hot Water Supply Line - Minimum 3/8” O.D. copper tubing or metal braided dishwasher supply line.

Shut-off valve and fittings appropriate for hot water supply line (copper tubing/ compression fitting, or braided hose).

90° elbow with 3/8” N.P.T. male threads on one leg, and sized to fit your water supply line (copper tubing/compression fitting, or braided hose) on the other leg.

Teflon tape or other pipe thread compound to seal plumbing connections.

UL listed conduit connector or strain relief.

Materials Supplied

MATERIALS SUPPLIED

Accessory Parts Supplied

Accessory parts for your dishwasher come in one or more plastic bags that are outlined below.

NOTE: Make sure you save all the bags until you have completed your installation. NOTE: Always use the supplied or recommended hardware.

Manual Set Bag

A Manual Set Bag is provided with each dishwasher and includes:

A Use & Care Instructions and Installation

Instructions (both manuals may be included in a single “flip-style” book

B Quick Reference Guide (select models) C Extra Tall Item Sprinkler D SHI and SHV Installation Template (SHI and SHV

models only)

E White Cotton Insulation Strip (SHY66C, SHX99A,

SHE66C, SHE99C and SHX57C models only)

Dishwasher Installation Kit

A Dishwasher Installation Kit is provided with each dishwasher and includes:

F Toe Panel Screws (2 black machine screws)

Note: These screws are included, but not used on models with the Toe Panel Installation Kit.

G Counter Top Mounting Brackets (2 “L” shaped metal

brackets)

H Mounting Bracket Screws (2 silver wood screws) I Rubber Drain Hose Adaptor (1 black rubber tube) J Hose Clamps ( 1 silver spring clamp to use to

attach the rubber adaptor to the Drain Hose and 1 gold screw clamp to attach the rubber adaptor to the plumbing)

K Wire Nuts (3 for electrical connection) L Electrical Junction Box Screws (2 silver

machine screws)

M Leg Leveler Locking Screws (2 gold coarse

threaded screws)

SHI/SHV Door Panel Installation Kit

A Door Panel Installation Kit is provided with select dishwashers that use a custom wood door panel and includes:

N Plastic Caps (2) O Spring Tension Screws (2 larger silver machine

screws used to adjust the door springs to accommodate doors of different weights)

P Door Mounting Brackets (2 gold metal brackets

and 2 white plastic brackets used to mount the custom door)

Q Door Mounting Bracket Screws (8 silver wood

screws)

R Door Mounting Screws (2 long silver screws used

to attach the door)

Toe Panel Installation Kit

A Toe Panel Installation Kit is provided on models SHY66C, SHX99A, SHE66C, SHE99C and SHX57C. These models have a special noise reducing Toe Panel with the following mounting hardware:

S Toe Panel Screws (2 black screws used to attach

the metal Toe Panel)

T Black Plastic Base Access Panel Screws (2 long

silver screws used to attach the Black plastic Base Access Panel to the dishwasher.

S T

Enclosure Preparation

Check clearance between dishwasher door and wall

34" (864mm) minimum

23-5/8" – 24-1/4" (600–616 mm)

Figure 1

Countertop

23-9/16"

(598mm)

90 90

WARNING

Electrical Shock Hazard

To avoid electrical shock, make sure the water supply and electrical supply are shut off before installation or service.

ENCLOSURE PREPARATION

NOTE: This dishwasher is designed to be enclosed on the top and both sides by standard residential kitchen cabinetry.

Select a location as close to the sink as possible for easy access to water supply and drain lines. For proper dishwasher operation and appearance, ensure that the enclosure is square and has the dimensions shown in Figure 1. If the dishwasher is to be installed in a corner, make sure that there is adequate clearance to open the door. See Figure 2.

WARNING

Electrical Shock/Fire Hazard

To avoid electric shock or fire, do not allow the electrical and water supply lines to touch. Separate channels are provided under the dishwasher (see page 10).

Figure 2

3-1/2"

(89mm)

Figure 3

1-5/16"

(33mm)

If the enclosure requires openings for the electrical supply cable, hot water supply line, and dishwasher drain hose, place them within the dimensions shown by the shaded area of Figure 3 to avoid interference with the dishwasher frame or other components. Make the openings for the electrical supply cable and hot water supply line 1” (25.4mm) diameter. Make the opening for the dishwasher drain hose 1-1/4” (32mm) diameter. If the openings are made through wood, sand them smooth. If the openings are made through metal, make them large enough to accommodate grommets or other protective sheaths with inside diameters of 1” (25.4mm) for the electrical supply cable and the hot water supply line, and 1-1/4” (32mm) for the dishwasher drain hose.

+ 14 hidden pages