Bosch DinionXF LTC 0495/11, DinionXF LTC 0495/21, DinionXF LTC 0495/51, DinionXF LTC 0495/61 Specifications

CCTV | LTC 0495 Series DinionXF Day Night Cameras

The LTC 0495 High Performance 1/3-inch Digital CCD Day/
Night Camera ensures the highest image quality possible at
any time. Depending on the available light the camera will
automatically switch from color to monochrome.

A unique combination of 15-bit digital video processing that
enhances sensitivity and XF-Dynamic which extends the
dynamic range provides a sharper, more detailed image
with outstanding accuracy in color reproduction.

All Dinion cameras are supplied ready to operate. Simply
attach and focus the lens, then connect power. No tools are
required for back focus and power connection. For
especially challenging situations where fine tuning or
special settings are required, the camera parameters can be
individually set using the control buttons on the side of the
camera and On-screen Display (OSD). The camera
automatically detects the lens type. The Lens Wizard
ensures accurate back-focusing for perfectly sharp pictures
at all times.

Functions

XF-Dynamic

The highly accurate 15-bit digital signal is automatically
processed to optimally capture the detail in both the high
and low light areas of the scene simultaneously, maximizing
the information visible in the picture.

Bilinx Technology

Bilinx is a bidirectional communication capability
embedded in the video signal of all Bosch Dinion cameras.
Technicians can check status, change camera settings and
even update firmware from virtually anywhere along the
video cable. Bilinx reduces service and installation time,
provides for more accurate set-up and adjustment, and
improves overall performance. In addition, Bilinx uses the
standard video cable to transmit alarm and status
messages, providing superior performance without
additional installation steps.

Video Motion Detection

The built-in video motion detector allows you to select up
to four fully programmable areas with individual thresholds.
The global scene change detector minimizes false alarms
caused by sudden lighting condition changes, such as
switching on or off the indoor or security lighting. When
motion is detected alarms may be displayed in the video
signal while the output relay can be closed in addition to
alarm message transmission on Bilinx.

Auto Black

The automatic black level feature enhances contrast by
compensating for reduced contrast (i.e. glare, fog, mist).

LTC 0495 Series DinionXF Day Night
Cameras

▶

15-bit DSP Technology

▶

High sensitivity

▶

Mechanically switching IR filter for IR sensitivity at
night

▶

XF-Dynamic for unsurpassed wide dynamic range

▶

Bilinx Communication for remote set-up and control

▶

Default Shutter eliminates motion blurring

▶

Four area video motion detection

▶

540 TVL resolution

www.boschsecurity.com

2 | LTC 0495 Series DinionXF Day Night Cameras

Default Shutter

The LTC 0495 features a fast, default shutter speed in
sufficient lighting conditions to capture moving objects.
When light levels fall and other adjustments have been
exhausted, the shutter speed reverts to the standard
setting to maintain sensitivity.

Back Light Compensation (BLC)

Offering a fully programmable BLC area of interest, and a
variable BLC level, the camera can be easily set up for even
the most challenging entrance applications.

Lens Wizard

The Lens Wizard automatically detects the lens type and
helps focus the lens at the maximum opening to ensure
proper focus is maintained throughout the 24-hour cyle. No
special tools or filters are required.

Programmable Modes

Three independent, preprogrammed operating modes
support typical applications, but are fully programmable for
individual situations. Switching between modes is easy via
Bilinx or the external alarm input.

Day/Night Mode

The Day/Night Mode LTC 0495 provides enhanced night
viewing by increasing the IR sensitivity. The IR filter can
switch from color to monochrome automatically by either
sensing the illumination level or via the alarm input. The
filter can be switched manually via the alarm input, through
the camera menu or via the Bilinx coaxial control interface.
An internal through the lens IR detector enhances the
monochrome mode stability, as it prevents reverting to the
color mode when IR illumination is dominant.

SensUp

By increasing the integration time on the CCD up to 10
times, the effective sensitivity is dramatically enhanced.
This is especially useful when relying only on moonlight for
illumination.

Certifications and Approvals

Electro Magnetic Compatibility

Emission EN55022 class B, FCC class B part 15

Immunity EN50130-4 Alarm Systems, Part 4

Vibration Camera with 500 gr (1.1 lbs) lens according

to IEC60068-2-27

Safety

LTC 0495/11 and LTC 0495/51: EN60065

LTC 0495/21 and LTC 0495/61: UL6500, cUL CAN/CSA E60065-00

Installation/Configuration Notes

Dimensions in mm (inches)

Parts Included

Quantity Component

1

LTC 0495 Series DinionXF Day\Night Camera

1 C/CS – mount conversion ring

1 Spare male 4 – pin lens connector

Lens not included

Technical Specifications

Electrical

Model No. Rated Voltage

LTC 0495/11 12 – 28 VAC 45 - 65 Hz

11 – 36 VDC

LTC 0495/21 12 – 28 VAC 45 - 65 Hz

11 – 36 VDC

LTC 0495/51 110 – 240 VAC 45 - 65 Hz

LTC 0495/61 110 – 240 VAC 45 - 65 Hz

Power Consumption 4 W

CCD Type 1/3-inch interline

Active Pixels

PAL Model: 752 x 582

NTSC Model 768 x 492

Sensitivity (3200 k)

Sensitivity (full video)

1)

2.4 lux (0.24 fc)

Sensitivity 50 IRE

1)

0.59 lux / 0.08 lux (Monochrome mode)

Minimum illumination

1)

0.24 lux / 0.038 lux (Monochrome mode)

Minimum Illumination with
Sens Up

0.024 lux / 0.0038 lux (Monochrome mode)