TX-10
Natural Sound AM/FM Stereo Tuner
Syntonisateur AM/FM stéréo de la série “Natural Sound”
“Natural Sound” MW/UKW-Stereo-Tuner
Natural Sound AM/FM stereotuner
Sintonizzatore stereo AM/FM a suono naturale
Sintonizador estéreo de AM/FM de sonido natural
Natural Sound Stereo Tuner
OWNER’S MANUAL MODE D’EMPLOI BEDIENUNGSANLEITUNG BRUKSANVISNING MANUALE DI ISTRUZIONI
MANUAL DE INSTRUCCIONES GEBRUIKSAANWIJZING
SUPPLIED ACCESSORIES ACCESSOIRES FOURNIS MITGELIEFERTE ZUBEHÖRTEILE MEDFÖLJANDE TILLBEHÖR ACCESSORI IN DOTAZIONE ACCESORIOS INCLUIDOS BIJGELEVERDE ACCESSOIRES
●After unpacking, check that the following parts are contained.
●Après le déballage, vérifier que les pièces suivantes sont incluses.
●Nach dem Auspacken überprüfen, ob die folgenden Teile vorhanden sind.
●Kontrollera efter det apparaten packats upp att följande delar finns med.
●Verificare che tutte le parti seguenti siano contenute nell’imballaggio dell’apparecchio.
●Desembale el aparato y verificar que los siguientes accesorios están en la caja.
●Controleer na het uitpakken of de volgende onderdelen voorhanden zijn.
●Indoor FM Antenna
●Antenne FM intérieure
●UKW-Innenantenne
●FM inomhusantenn
●Antenna FM per interni
●Antena FM interior
●FM Binnenantenne
●Audio connection cord
●Câble de connexion audio
●Audio-Anschlußkabel
●Audio anslutningssladdar
●Cavo di collegamento audio
●Cable de conexión de audio
●Audio aansluitkabel
●AM Loop Antenna
●Cadre-antenna AM
●MW-Rahmenantenne
●AM ramantenn
●Antenna AM ad anello
●Antena de cuadro de AM
●AM Lusantenne
2
Thank you for selecting this YAMAHA stereo tuner
FEATURES
•40 Station Random Access Preset Tuning
•Automatic Preset Tuning
•Multi-Status Station Memory
•Direct PLL Synthesizer Tuning
•Preset Station Shifting Capability
•Multi-Functions for RDS Broadcast Reception (U.K. and Europe models only)
CONTENTS |
|
Supplied Accessories |
......................................................2 |
Caution............................................................................ |
3 |
Connections .................................................................... |
4 |
Tuning Operations .......................................................... |
7 |
Preset Tuning.................................................................. |
9 |
Receiving RDS Stations (U.K. and Europe models only) |
|
...................................................................................... |
12 |
Troubleshooting ............................................................ |
17 |
Specifications................................................................ |
18 |
CAUTION: READ THIS BEFORE OPERATING YOUR UNIT.
1.This unit is a sophisticated stereo tuner. To assure proper operation and the best possible performance, please read this manual carefully.
2.Choose the installation location for the unit carefully. Avoid placing it in direct sunlight or close to a source of heat. Also avoid locations subject to vibration and excessive dust, heat, cold or moisture. Keep it away from such sources of hum as transformers or motors.
3.Do not open the cabinet, because this may result in damage to the unit or electrical shock. If a foreign object should get into the unit, contact your local dealer.
4.When not planning to use this unit for long periods of time (ie., vacation, etc.), disconnect the AC power plug from the wall outlet.
5.To prevent lightning damage, disconnect the AC power plug and disconnect the antenna cable when there is an electrical storm.
6.When disconnecting the power plug from the wall outlet, always pull directly on the plug; never pull the cord itself.
7.Do not use force when operating switches and other controls.
8.When moving the unit, be sure to first disconnect the power plug and disconnect all wires connected from the unit to other equipment.
9.Do not attempt to clean this unit with chemical solvents, because this may damage the finish. Use a clean, dry cloth.
10.Be sure to read the “TROUBLESHOOTING” section of this manual for advice on common operating errors before concluding that the unit is faulty.
11.Keep this manual in a safe place for future reference.
12.Voltage Selector (General Model only)
The voltage selector on the rear panel of this unit must be set for your local main voltage BEFORE plugging into the AC main supply.
Voltages are 110-120/220-240V AC, 50/60 Hz.
FREQUENCY STEP switch (General Model only)
Because the interstation frequency spacing differs in different areas, set the FREQUENCY STEP switch (located at the rear) according to the frequency spacing in your area.
Before setting this switch, disconnect the AC power plug of this unit from the AC outlet.
The apparatus is not disconnected from the AC power source as long as it is connected to the wall outlet, even if the apparatus itself is turned off.
IMPORTANT
Please record the serial number of this unit in the space below.
Serial No.:
The serial number is located on the rear of the unit. Retain this Owner’s Manual in a safe place for future reference.
WARNING
TO REDUCE THE RISK OF FIRE OR ELECTRIC SHOCK, DO NOT EXPOSE THIS APPLIANCE TO RAIN OR MOISTURE.
CAUTION (FOR CANADA MODEL)
TO PREVENT ELECTRIC SHOCK, MATCH WIDE BLADE OF PLUG TO WIDE SLOT AND FULLY INSERT.
FOR CANADIAN CUSTOMER
THIS DIGITAL APPARATUS DOES NOT EXCEED THE “CLASS B” LIMITS FOR RADIO NOISE EMISSIONS FROM DIGITAL APPARATUS SET OUT IN THE RADIO INTERFERENCE REGULATION OF THE CANADIAN DEPARTMENT OF COMMUNICATIONS.
For U.K. customers
If the socket outlets in the home are not suitable for the plug supplied with this appliance, it should be cut off and an appropriate 3 pin plug fitted. For details, refer to the instructions described below.
Note: The plug severed from the mains lead must be destroyed, as a plug with bared flexible cord is hazardous if engaged in a live socket outlet.
Special Instructions for U.K. Model
IMPORTANT
THE WIRES IN THE MAINS LEAD ARE COLOURED IN ACCORDANCE WITH THE FOLLOWING CODE:
Blue: NEUTRAL
Brown: LIVE
The colours of the wires in the mains lead of this apparatus may not correspond with the coloured markings identifying the terminals in your plug. Proceed as follows: the wire which is coloured BLUE must be connected to the terminal which is marked with the letter N or coloured BLACK. The wire which is coloured BROWN must be connected to the terminal which is marked with the letter L or coloured RED. Making sure that neither core is connected to the earth terminal of the three pin plug.
English
3
CONNECTIONS
ANTENNA CONNECTIONS
●Each antenna should be connected to the designated terminals correctly, referring to the following figure.
●Both AM and FM indoor antennas are included with this unit. In general, these antennas will probably provide sufficient signal strength. Nevertheless, a properly installed outdoor antenna will give clearer reception than an indoor one. If you experience poor reception quality, an outdoor antenna may result in improvement.
Outdoor FM antenna |
Indoor FM |
Outdoor AM antenna |
|
AM loop |
|
|
antenna |
|
|
antenna |
|
|
(included) |
|
|
(included) |
|
|
|
FM ANT |
GND |
AM ANT |
75Ω UNBAL. |
|
|
75-ohm antenna adapter
300-ohm flat ribbon cable
75-ohm coaxial cable |
75-ohm/300-ohm |
|
|
Ground |
|
|
antenna adapter |
4
Connecting the indoor FM antenna
*If you connect an outdoor FM antenna to this unit, do not connect the indoor FM antenna to this unit.
Connecting the AM loop antenna
Orient so that the best reception is obtained.
*The AM loop antenna should be placed apart from the main unit. The antenna may be hung on a wall.
*The AM loop antenna should be kept connected, even if an outdoor AM antenna is connected to this unit.
m Optional outdoor FM antenna
Consult with your dealer or authorized service center about the best method of selecting and erecting an outdoor FM antenna. The choice of the feeder cable is also important. Flat ribbonshaped twin-lead cable performs well electrically, and is cheaper and somewhat easier to handle when routing it through windows and around rooms. Coaxial cable is more expensive, does a much better job of minimizing interference, is less prone to the effects of weather and close-by metal objects, and is nearly as good a signal conductor as feeder cable, particularly for foam-type coaxial cables. Coaxial cable is somewhat more difficult to install at the point where the cable enters the building. If coaxial cable is selected, make sure the antenna is designed to be used with that type of cable.
*Use a 75-ohm/300-ohm antenna adapter (not included) or a 75-ohm antenna adapter (not included) for connections.
300-ohm feeder cable |
75-ohm coaxial cable |
|||||||||||||||
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
75-ohm/300-ohm antenna adapter
75-ohm antenna 75-ohm coaxial 
adapter
cable
English
|
|
|
|
|
|
|
|
300-ohm feeder |
|
|
75-ohm coaxial |
cable |
|
|
cable |
Notes for FM antenna installation
●To minimize automobile ignition noise, locate the antenna as far from heavy traffic as possible.
●Keep the feeder cable or coaxial cable as short as possible. Do not bundle or roll up excess cable.
●The antenna should be at least two meters (6.6 feet) from reinforced concrete walls or metal structures.
5
m Optional outdoor AM antenna
In steel buildings or at a great distance from the transmitter, it may be necessary to install an outside long wire antenna.
GND terminal
For maximum safety and minimum interference, connect the GND terminal to a good earth ground. A good earth ground is a metal stake driven into moist earth.
CONNECTIONS TO THE AMPLIFIER
●Before making any connections, switch OFF the power to this unit and the amplifier or other component.
●Be sure that the connections from the left (“L”) and right (“R”) LINE OUT terminals are connected to the corresponding (left and right) input terminals of the amplifier or other component.
*When connecting with the YAMAHA amplifier AX-10, connect this unit’s LINE OUT terminals to the TUNER terminals (numbered 2) on the rear of AX-10.
Amplifier
R L
2
TUNER
Connection cord (included)
This unit
FM ANT |
GND |
AM ANT |
LINE OUT |
|
|
|
2 |
75Ω UNBAL. |
|
|
L |
|
|
|
R |
To AC outlet
* This unit has a remote control sensor. It receives signals from the remote control transmitter provided with a YAMAHA amplifier.
Remote control sensor
6
Loading...