Item #_____________ C.S.I. Section 11420
COMMANDER SERIES
HEAVY-DUTY BACK RISERS AND HIGH SHELVES
Model S-36-HSD
Listed by the National Sanitation Foundation
Approved by ______________________
BASIC MODELS:
RS-36 Single height back riser, 36"w x 261⁄2"h. RDS-36 Double height back riser, 36"w x 373⁄4"h. S-36-HSS Single deck high shelf, 36"w x 261⁄2"h.
S-36-HSF Single deck flo-thru high shelf, 36"w x 261⁄2"h. S-36-HSD Double deck high shelf, 36"w x 373⁄4"h.
*See back side for additional sizes.
KEY FEATURES — ALL MODELS:
Stainless steel front, sides and high shelves.
Flue exhaust area is 41⁄2" deep by the width of the backguard/ high shelf ordered.
OPTIONAL FEATURES — ALL MODELS:
Stainless steel finishing back.
Common backguards and high shelves up to 96" wide.
Enclosure end caps for double deck high shelves.
Special height back risers (consult Customer Service).
DESCRIPTION:
8" high stainless steel stub back. Standard with all Commander Series ranges.
261⁄2" high, ______" wide back riser, Wolf Model No.
______________. Stainless steel front and sides. To be installed over (item) (model) number(s)______________.
373⁄4" high, ______" wide back riser, Wolf Model No.
______________. Stainless steel front and sides. To be installed over (item) (model) number(s)______________.
261⁄2" high, ______" wide single deck high shelf, Wolf Model No. ____________. Stainless steel front and sides. To be installed over (item) (model) number(s)______________.
261⁄2" high, ______" wide single deck flo-thru high shelf, Wolf Model No. ______________. Stainless steel front and sides. To be installed over (item) (model) number(s)
_____________.
373⁄4" high, _____" wide double deck high shelf, Wolf Model No. _____. Stainless steel front and sides. To be installed over (item) (model) number(s)._____________.
Date: _____________________________
Wolf Range Company
Division of ITW Food Equipment Group LLC (800) 366-9653
www.wolfrange.com
MODEL:COMMANDER SERIESHeavy -Duty BackRisers andHigh shelves
F-39118 (9/05)