Yealink IP PHONE
SIP-T21 E2 & SIP-T21P E2
Quick Start Guide (V80.130)
www.yealink.com |
Applies to firmware version 52.80.0.60 or later. |
Packaging Contents
The following items are included in your package. If you find anything missing, contact your system administrator.
T21P E2
Handset Cord |
Ethernet Cable |
Stand |
||||||
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
IP Phone |
Handset |
Quick Start Guide |
Power Adapter |
|
|
|
Optional |
Note: The models displayed on the phone differ from each other. The packaging content "IP Phone" listed above takes a SIP-T21P E2 IP phone as an example.
We recommend that you use the accessories provided or approved by Yealink. The use of unapproved third-party accessories may result in reduced performance.
Assembling the Phone
1. Attach the stand, as shown below:
A
Desk Mount Method
2
B
1
180
T21P E2 |
Wall Mount Method
Note: The hookswitch tab has a lip which allows the handset to stay on-hook when the IP phone is mounted vertically.
1
2. Connect the handset and optional headset, as shown below:
Note: The headset should be purchased separately.
3. Connect the network and power, as shown below :
You have two options for network and power connections. Your system administrator will advise you which one to use.
|
|
Power Adapter |
PC Connection |
|||||||||||||||||||||
|
|
(DC 5V) |
|
|
|
|
(Optional) |
|||||||||||||||||
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
A
AC Power Option
B
PoE ( Power over
Ethernet ) Option
IEEE 802.3af compliant |
PC Connection |
PoE Hub/Switch |
(Optional) |
Note: The IP phone should be used with Yealink original power adapter (5V/600mA) only. The use of the third-party power adapter may cause the damage to the phone.
If inline power (PoE) is provided, you do not need to connect the power adapter. Make sure the hub/switch is PoE-compliant. PoE is only applicable to the SIP-T21P E2 IP phone.
Startup
After the IP phone is connected to the network and |
Welcome |
|
supplied with power, it automatically begins the |
||
|
||
initialization process. After startup, the phone is ready |
Initializing... please wait |
|
for use. You can configure the phone via phone user |
||
interface or web user interfafce. |
|
|
|
|
2