Sony Trinitron WEGA KV-SZ29M91K User Manual

0 (0)

2-887-146-E2 (1)

Trinitron Color TV

Operating Instructions

•Before operating the unit, please read this manual thoroughly and retain it for future reference.

KV-SZ29

M91K

WARNING

•Dangerously high voltages are present inside the TV.

•TV operating voltage: 220 – 240 V AC.

•Do not plug in the power cord until you have completed making all other connections; otherwise a minimum leakage current might flow through the antenna and other terminals to ground.

•To avoid battery leakage and damage to the remote, remove the batteries from the remote if you are not going to use it for several days. If any liquid leaks from the batteries and touches your skin, immediately wash it away with water.

For your own safety, do not touch	For children’s safety, do not leave	To prevent fire or shock hazard, do
any part of the TV, the power cord	children alone with the TV. Do not	not expose the TV to rain or
and the antenna cable during	allow children to climb onto it.	moisture.
lightning storms.

Do not place any objects on the TV.	Do not operate the TV if any liquid	Install the TV on a stable TV stand
The apparatus shall not be	or solid object falls into it. Have it	and floor which can support the
exposed to dripping or splashing	checked immediately by qualified	TV set weight. Ensure that the TV
and that no objects filled with	personnel only.	stand surface is flat and its area is
liquids, such as vases, shall be		larger than the bottom area of the
placed on the apparatus.		TV.

Do not block the ventilation	Your TV is recommended for	Do not plug in too many
openings of the TV. Do not install	home use only. Do not use the TV	appliances to the same power
the TV in a confined space, such	in any vehicle or where it may be	socket. Do not damage the power
as a bookcase or built-in cabinet.	subject to excessive dust, heat,	cord.
	moisture or vibrations.

Do not open the cabinet and the	Clean the TV with a dry and soft	Pull the power cord out by the
rear cover of the TV as high	cloth. Do not use benzine, thinner,	plug. Do not pull the power cord
voltages and other hazards are	or any other chemicals to clean the	itself. Even if your TV is turned
present inside the TV. Refer	TV. Do not attach anything (e.g.,	off, it is still connected to the AC
servicing and disposal of the TV	adhesive tape, cellophane tape,	power source (mains) as long as
to qualified personnel.	glue) on the painted cabinet of the	the power cord is plugged in.
	TV. Do not scratch the picture	Unplug the TV before moving it
	tube.	or if you are not going to use it for
		several days.

Table of Contents

Installation
Securing the TV ....................................	4
Getting Started .....................................	5
Setting up your TV
(“Initial Setup”) ....................................	6
Overview of Controls
TV front and rear panels .....................	8
Using the remote control and
basic functions ......................................	9
Advanced Operations
Selecting the picture and sound
modes ..................................................	11
Enjoying the Dynamic 5-Band
Visualizer ............................................	12
Enjoying the Party Mode ..................	13
Listening to the FM Radio ................	14
Enjoying stereo or bilingual
programs .............................................	15
Viewing Teletext .................................	16

Made in Malaysia.

Manufacturer: Sony Corporation

Address: 1-7-1 Konan, Minota-ku,

Tokyo 108-0075, Japan.

Menu Adjustment
Introducing the WEGA GATE
navigator .............................................		17
“Settings” Adjustment ......................		18
Changing the “Picture” setting ........		19
Changing the “Sound” setting .........		21
Changing the “Channel Setup”
setting ..................................................		22
Changing the “Setup” setting ..........		24
		GB
Additional Information
Connecting optional components ...		25
Troubleshooting .................................		27
Specifications ......................	Back cover

Installation

x Securing the TV

To prevent the TV from falling, use the supplied screws, clamps and band to secure the TV.

20 mm

3.8 mm

screws

clamps

band

Screw the band to the TV stand and to the provided hole at the rear of your TV.

(1) Put a cord or chain through the clamps.

(2) Screw one clamp to a wall or pillar and the other clamp to the provided hole at the rear of your TV.

(1) Attach each end of a cord or chain to the provided holders at the rear of your TV.

(2) Securely fix the attached cord or chain to a wall or pillar using an attachment which can support the TV set weight.

Note

• Use only the supplied screws. Use of other screws may damage the TV.

4 Installation

x Getting Started

Step 1

Insert the batteries (supplied) into the remote.

b	Note

• Do not use old or different types of batteries together.

Step 2

Connect the antenna cable (not supplied) to 8 (antenna input) at the rear of the TV.

Tips

•Your TV can receive both TV and FM radio signal from the appropriate connections through the 8 (antenna input) terminal (see page 25).

•You can also connect your TV to other optional components (see page 25).

Step 3

Plug in the power cord, then press ! on the TV to turn it on.

Note

•The 1 (standby) indicator flashes green for a few seconds when turning on the TV. This does not indicate a malfunction.

Step 4

Set up the TV by following the instructions of the “Начальная настройкa” (“Initial Setup”) menu (see page 6).

Installation

Installation 5

x Setting up your TV (“Initial Setup”)

When you turn on your TV for the first time, the “Начальная настройкa” (“Initial Setup”) menu will appear. You may change the menu language, preset the TV channels automatically, sort or edit the channels and adjust the picture position using the buttons on the remote control or TV front panel.

1	Press V or v to select the desired menu


	language, then press .
	language, then press .

The selected menu language appears.

Select

Confirm

End

2	Press V or v to select “Yes”, then press
	to preset the channels automatically.

The screen will indicate automatic presetting is in progress.

After all available channels have been tuned and stored, the “Program Sorting/Edit” menu appears automatically on the screen.

To skip automatic channel presetting, select “No”, then press .

If the message “No channel found. Please connect cable/antenna” appears, check your TV connections, then press .

Select Confirm End


Program:	01
TV System:	Auto
VHF Low

	End

3	The “Program Sorting/Edit” menu enables
	you to sort and edit the channels.
	a) If you wish to keep the channels in the current
		condition, press WEGA GATE to exit.
	b)	Press V or v to select the program
		number with the channel you wish to
		change. The selected channel will appear
		on the screen.
	c)	If you wish to store the channels in a
		different order:
		1)	Press b to enter sorting mode.
		2)	Press V or v to select the new program
			number position for your selected channel,
			then press B.

Program Sorting/Edit
PROG	Label		Skip
01			Off
02			Off
03			Off
04			Off
Sorting:		Edit:
Select			Confirm	Exit

Program Sorting/Edit

PROG	Label	Skip
01		Off
02		Off
03	01		Off
04		Off
Sorting mode
Select		Confirm	Exit

6 Installation

d)If you wish to edit the channels, press to change to edit mode.

Press b until the mode that you wish to edit

is highlighted: Label, Skip, (block symbol). Then press .

1)To label, press V or v to select the alphanumeric characters for the label. Then press .

2)To skip the program number, press V or v to select “On”. Then press .

You can skip this program number when using PROG +/-.

3)To block unwanted program number, press V or v to select . Then press .

e)Repeat step b) to d) if you wish to change other channels.

Press WEGA GATE to go to the next menu.

Select Confirm Exit

Select

Confirm

Exit

4	Press B or b to adjust the bars on the top
	and bottom of the menu if they are
	slanted, then press .
	“Picture V-Position” menu appears.	Select	Confirm	End
	“Picture V-Position” menu appears.
5	If the upper and lower bars are not
	equally positioned to the top and
	bottom of the screen, press V or v to
	adjust them, then press .	Select	Confirm	End
	If no adjustment is necessary, then press .

6 To prevent this “Initial Setup” menu from appearing again when you turn on the TV by pressing !, press V or v to select “No”, then press .

To allow this menu to appear again, select “Yes”, then press .

Select Confirm

Tip

• You can immediately go to the end of the ”Initial Setup” menu by pressing WEGA GATE.

Installation

Installation 7

Sony Trinitron WEGA KV-SZ29M91K User Manual

Overview of Controls

x TV front and rear panels

TV rear panel
1
		Y
		CB
(MONO) L		L (MONO)
		CR
R		R
qg	qf	qd	qs

TV front panel
	qa	0	9	8 7 6 5	4	3 2	1
MIC 1 MIC 2		L(MONO)	R
		2		FM	PROG
		2
Button/Terminal				Function			Page
1	!			Turn off or turn on the TV.			5
2 1				Standby indicator.			5
2				Wake Up indicator.			10
3				Remote control sensor.			–
4 PROG +/–				Select program number.			–
5 2 +/–				Adjust volume.			–
6 t				Select TV or video input.			25
WEGA GATE menu operations
	4,5 ,	, ,		Select and adjust items.			17
	6			Confirm selected items.			17
	7 WEGA GATE			Display or cancel WEGA GATE menu.			17
8 FM				Listen to FM Radio.			14
9 i				Headphone jack.			–
0 t2				Video input terminal 2.			25
qa MIC 1, MIC 2				Microphone input terminal 1, 2.			13
qs 8				Antenna input terminal.			25
qd T				Monitor output terminal.			26
qf				Component video input terminal.			26
qg t1				Video input terminal 1.			25

8 Overview of Controls

x Using the remote control and basic functions

0
					Button	Description	Page
qa					1 ?/1	Turn off temporarily or turn on	–
qa				1		the TV.
qs	A/B				2 a	Display the TV program.	–
				2	2 a	Display the TV program.	–
qd	1	2	3	2	3	Jump to last program number	–
	1	2	3			that has been watched for
	4	5	6			at least five seconds.
qf	4	5	6		4 PROG +/–	Select program number. To select	–
qf	7	8	9		4 PROG +/–	Select program number. To select	–
	7	8	9			quickly, press and hold until the
		0		3		desired program number appears.
		0		3	5 2 +/–	Adjust volume.	–
			PROG		5 2 +/–	Adjust volume.	–
qg				4	8	Change the picture size:	–
qh				5		“On” (16:9 wide mode), “Off”.
qh					9	Select surround mode options.	21
					9	Select surround mode options.	21
					0	Display on-screen information or	12
qj						Dynamic 5-Band Equalizer.
qj				6	qa	Mute the sound.	–
			WEGA	6	qa	Mute the sound.	–
qk	RETURN		GATE
qk				7	qd t	Select TV or video input.	25
ql				8	qf 0 – 9	Input numbers. For program	–
w;				9		numbers 10 and above, enter the
		TV				second digit within two seconds.
					ql	Select sound mode options	11
						with a 5-Band Graphic
						Equalizer display.
					w;	Select picture mode options.	11
					WEGA GATE menu operations
					6	Confirm selected items.	17
					7 WEGA	Display or cancel the
					GATE	WEGA GATE menu.
					qj V, v, B, b	Select and adjust items.
					qk RETURN	Return to the previous level.

continue

of Overview

olsContr

Overview of Controls 9

continued

Button	Description	Page
Timer operations
qg	Set TV to turn on automatically according to the	–
(Wake up timer)	desired period of time (max. of 12 hours).

The indicator on TV lights up amber once you set the wake up timer.

If no buttons or controls are pressed for more than one hour after the TV is turned on using the wake up timer, the TV automatically goes into standby mode.

qh				Set TV to turn off automatically according to the	–
	(Sleep timer)			desired period of time (max. of one hour and
				30 min.).

Teletext operations (green label)
,	,	,	,	All buttons are used for Teletext operations.	16
,	,	,	,
	(red, green,
	yellow, blue)

PIP operations
,	, ,	,	,	Not function for your TV.	–
,	, ,	,	,	Not function for your TV.
	V v		B b

Stereo/bilingual operations
qs A/B				Select stereo/bilingual mode.	15
qs A/B				Select stereo/bilingual mode.	15

10 Overview of Controls

Advanced Operations

x Selecting the picture and sound modes

You can select picture and sound modes and adjust the setting to your preference in the “Custom” option.

A/B

1 2 3

4 5 6

7 8 9

PROG

Selecting the picture mode

Press to select the desired picture mode.

Select	To view

“Vivid”	bright, contrast and sharp
	pictures.

“Standard”	normal pictures.

“Custom”	the last adjusted picture setting
	from the “Picture Adjustment”
	option in the menu (see page 20).

RETURN	WEGA
	GATE

Selecting the sound mode

Press to select the desired sound mode. 5-Band Graphic Equalizer display will appear.

Select						To listen to
“Dynamic”						dynamic and clear sound that emphasizes both the low
“Dynamic”	Dynamic					dynamic and clear sound that emphasizes both the low
						and high tones.
	100	300	1k	3k	8k

“Standard”	Standard					sound that emphasizes voice and high tones.
	100	300	1k	3k	8k

“Custom”	Custom					the last adjusted sound setting from the
						“Sound Adjustment” option in the menu (see page 21).
	100	300	1k	3k	8k

Advanced Operations 11

x Enjoying the Dynamic 5-Band

Visualizer

The Dynamic 5-Band Visualizer enables you to visually enjoy the sound rhythm effect of the music and other sound from the TV.

Press	repeatedly until the Dynamic 5-Band Visualizer display appears on the
screen.
	A/B		On-screen	Display
			information	Off
	1	2	3	Visualizer
	4	5	6	Visualizer
	4	5	6	Dynamic 5-Band
	7	8	9	Dynamic 5-Band
	7	8	9	Visualizer display
		0		Visualizer display
		0

PROG

RETURN	WEGA
	GATE

Notes

•This feature is available for all TV channels, external inputs, FM Radio and Party Mode.

•To enjoy the visualization effect, you must set the volume level above 0 and make sure the TV is not in mute condition.

•Dynamic 5-Band Visualizer only represents the original sound and it is not affected by user adjustment (e.g., “Sound Mode”, “Sound Adjustment”).

•The visualization effect may vary depending on the original sound.

•You cannot change the position of the Dynamic 5-Band Visualizer display.

12 Advanced Operations

x Enjoying the Party Mode

You can sing duet along with any music program of TV broadcast or with any audio/video equipment or create visual presentations (e.g., photos or video stories) with narration and favorite background music by using the Party Mode feature.

TV front panel			Party Mode Setup
TV front panel			MIC 1 Level
			MIC 1 Level
			MIC 2 Level
			Echo Level
MIC 1 MIC 2	L(MONO)	R	Vocal Reducer:	Off
MIC 1 MIC 2	L(MONO)	R	Audio Input Fix:	Off
	2		Audio Input Fix:	Off
	2		Reset
			Reset
		Select	Confirm	End

1	Select the input connected to your audio/video equipment.
2	Connect the microphone (not supplied) to the microphone input terminal
	and switch it on.
	You can begin singing or speaking from the microphone at the last TV volume
	setting. You can press A/B button on remote control to switch between left (“L”)
	or right (“R”) channel sound for VCD karaoke source only (either music or
	vocal) when video input is selected and “Audio Input Fix” is set to “Off”.

3	Press WEGA GATE and select “Party Mode”.
4	Select “MIC 1 Level”, “MIC 2 Level” or “Echo Level”, then press . Press V,v,
	B or b to adjust the microphone volume and echo level of the microphone
	sound, then press .

5	If you want to reduce the vocal of the singer or speaker, select “On” from
	“Vocal Reducer” and press	(effective for non-karaoke stereo source and
	when “Audio Input Fix” is “Off” only).

6	Select “Audio Input Fix” and press , then press V or v to select the input
	connected to the audio equipment from which you want to hear the sound:
	“Video 1”, “Video 2” or “DVD”.
	To revert to the original sound source, select “Off”, then press .

7	Selecting “Reset” will set your TV to the factory settings (except for “Audio
	Input Fix”).

Notes

•Be sure to adjust the microphone and echo level to the minimum level before plugging in and disconnecting the microphone.

•For your own safety, do not use or plug in the microphone during lightning storms.

•Keep microphone away from the speakers and adjust its volume to avoid acoustic feedback (howling) and distortion.

•Microphone volume will be affected by TV volume.

•Vocal Reducer will be set to “Off” if users select “L” or “R” channel sound.

Advanced Operations 13

x Listening to the FM Radio

You are able to listen to the FM radio stations using your TV.

To access to FM Radio mode:

Press WEGA GATE button and select “FM Radio” (see page 17). or

Press FM button on the front panel (see page 8).

To exit from FM Radio mode:

Press WEGA GATE button, select the desired items: “TV” or “External Inputs”, then press . Select the desired TV channel or external inputs and press .

Press FM button on the front panel.

A/B

1 2 3

4 5 6

7 8 9

Listening to preset stations

1 Access to FM Radio mode.

2 Press WEGA GATE button and select “Settings”. Preset the desired FM radio stations in “FM Radio Setup” from “Channel Setup” menu (see page 22).

PROG +/–

V,v,

B, b

WEGA GATE

	PROG	3	Exit from “Channel Setup” menu by pressing WEGA
		3	Exit from “Channel Setup” menu by pressing WEGA
			GATE button. The selected preset FM radio station
			number and label will appear on the screen.
			To select the desired preset FM radio station, press
	WEGA		PROG +/–.
RETURN	GATE		Tip
			Tip
			• You can also use the 1-9 buttons on the remote control to
	TV		directly select the desired preset FM radio station.
	TV

Listening to non-preset stations

1 Access to FM Radio mode.

2 Press V or v to search for the desired FM radio station. The preset number and label will not be displayed.

3 If the station has a weak signal, press B or b to fine tune the radio frequency manually.

Notes

•You can only operate V, v, B and b functions using the remote control buttons in FM Radio mode.

•The available radio frequency is only for temporary listening pleasure and cannot be stored in the memory.

•If the message “Please setup FM Radio” appears, display the “Channel Setup” menu and select “FM Radio Setup” to preset the desired FM radio stations (see page 22).

Note

•When a FM stereo program has static noise, press A/B until “Mono” appears. There will be no stereo effect, but the noise will be reduced.

14 Advanced Operations

x Enjoying stereo or bilingual programs

You can enjoy stereo sound or bilingual programs of NICAM and A2 stereo systems by using the A/B button.

When receiving a NICAM program

			Broadcasting	On-screen display (Selected sound)
A/B			NICAM	NICAM	t	Mono
A/B			stereo	(Stereo sound)		(Regular sound)
			stereo	(Stereo sound)		(Regular sound)
1	2	3		t
4	5	6	NICAM	NICAM Main t NICAM Sub t Mono
			NICAM	NICAM Main t NICAM Sub t Mono
7	8	9	bilingual	(Main sound)	(Sub sound)	(Regular sound)
	0			t
	0
		PROG	NICAM
			NICAM	NICAM Main	t	Mono
			monaural	(Main sound)		(Regular sound)
				t

RETURN	WEGA
	GATE

When receiving an A2 program

Broadcasting	On-screen display (Selected sound)

A2	Stereo	t	Mono
stereo	(Stereo sound)		(Regular sound)
	t

A2	Main	t	Sub
bilingual	(Main sound)		(Sub sound)
	t

Note

•If the stereo sound is noisy when receiving a stereo program, select “Mono”. The sound becomes monaural, but the noise is reduced.

Advanced Operations 15

x Viewing Teletext

Some TV stations broadcast an information service called Teletext which allows you to receive various information, such as stock market reports and news.

You can use the buttons on the remote to view Teletext.

A/B
1	2	3
4	5	6
7	8	9
,	0
,		PROG
RETURN		WEGA
RETURN		GATE

	(red,
	green,	TV
	yellow,	TV
	yellow,
	blue)

To	Do this

display a Teletext	Press	. Each time you press	, the
page on the	screen changes as follows:
TV picture	Teletext t Teletext and TV t TV.
	If there is no Teletext broadcast, “100” is
	displayed at the top left corner of the
	screen.

check the contents	Press .
of a Teletext service	An overview of the Teletext contents,
	including page numbers, appears on the
	screen.

select a Teletext page	Press the number buttons to enter the
	three-digit page number of the desired
	Teletext page. If you make a mistake,
	reenter the correct page number. To
	access the next or previous page, press
	or .

hold (pause) a	Press	to display the symbol “	” at
Teletext display	the top left corner of the screen. To
	resume normal Teletext viewing, press
	.

reveal concealed	Press .
information (e.g.,	To conceal the information, press the
an answer to a quiz)	button again.

enlarge the Teletext	Press	. Each time you press	, the
display	Teletext display changes as follows:
	Enlarge upper half t Enlarge lower
	half t Normal size.

stand by for a Teletext (1) Enter the Teletext page number that

page while watching	you want to refer to, then press .
a TV program	(2) When the page number is displayed,
	press	to show the text.

select a FASTEXT	Press	(red, green, yellow and blue)
menu or the colored	that corresponds to the desired menu or
boxes	page number.

turn off Teletext	Press a.

Note

• The FASTEXT feature can be used only when the FASTEXT broadcast is available.

16 Advanced Operations

Menu Adjustment

x Introducing the WEGA GATE

navigator

WEGA GATE is a gateway that allows you access to preset TV channels, connected external inputs, FM Radio mode, Party Mode and “Settings” menu.

	WEGA GATE		TV
	TV	“TV”	01	watch the preset TV
	External Inputs	“TV”	02	watch the preset TV
	FM Radio		03	channels (see page 6)
	Party Mode		04
	Settings		05
Select	Confirm		Select	Confirm
			End

		External Inputs
		“External Inputs”	1	Video 1		select the inputs for the
		“External Inputs”	2	Video 2		select the inputs for the
		“FM Radio”		DVD		connected equipment
		“FM Radio”				(see page 25)
		Select		Confirm
FM Radio		End
				Party Mode Setup
Preset 1:			MIC 1 Level			adjust your TV for
---.--		“Party Mode”	MIC 2 Level			adjust your TV for
		“Party Mode”	Echo Level			Party Mode
Please setup FM Radio			Vocal Reducer:		Off	(see page 13)
Select Preset 1-9			Audio Input Fix:		Off	(see page 13)
Select Preset 1-9			Audio Input Fix:		Off
Search	Fine	Exit	Reset
		Select		Confirm		End

listen to the FM	Picture
Radio (see page 14)	Picture
Radio (see page 14)	Picture Mode:	Vivid	change the settings
	Picture Mode:	Vivid
“Settings”	Picture Adjustment
“Settings”	Color Temperature:	Cool	of your TV
	Color Temperature:	Cool
	VM:	High	(see page 18)
	Intelligent Picture:	On	(see page 18)
	Signal Level Indicator:		On
Select	Confirm	End