Sharp AQUOS LC-20B2UA Manual

LC-20B2UA

M
E

N
U

LCD COLOR TELEVISION
TÉLÉVISEUR COULEUR À

ÉCRAN À CRISTAUX
LIQUIDES (LCD)

OPERATION MANUAL

ENGLISH

FRANÇAIS

Printed on post-consumer recycled paper.
Imprimé sur du papier recyclé.

MODE D’EMPLOI

Printed in Japan

Imprimé au Japon

TINS-7604CEN1

02P01-JKK

A

LC-20B2UA

LCD COLOR TELEVISION

ENGLISH

OPERATION MANUAL

ENGLISH

IMPORTANT INFORMATION

WARNING: TO REDUCE THE RISK OF FIRE OR ELECTRIC SHOCK, DO

NOT EXPOSE THIS PRODUCT TO RAIN OR MOISTURE.

The lightning flash with arrow­head symbol, within an equilat-

CAUTION

RISK OF ELECTRIC SHOCK.
DO NOT OPEN.

CAUTION: TO REDUCE THE RISK OF ELECTRIC SHOCK,

DO NOT REMOVE COVER (OR BACK).

NO USER-SERVICEABLE PARTS INSIDE.

REFER SERVICING TO QUALIFIED SERVICE

PERSONNEL.

eral triangle, is intended to alert
the user to the presence of
uninsulated “dangerous voltage”
within the product’s enclosure
that may be of sufficient
magnitude to constitute a risk of
electric shock to persons.

The exclamation point within a
triangle is intended to alert the
user to the presence of impor­tant operating and maintenance
(servicing) instructions in the
literature accompanying the
product.

IMPORTANT INFORMATION

WARNING: FCC Regulations state that any unauthorized changes or modifications to this equipment

not expressly approved by the manufacturer could void the user’s authority to operate this equipment.

U.S.A. ONLY

CAUTION: TO PREVENT ELECTRIC SHOCK, MATCH WIDE BLADE OF

PLUG TO WIDE SLOT, FULLY INSERT.

“Note to CATV system installer: This reminder is provided to call the CATV system installer’s attention to Article 820-40
of the National Electrical Code that provides guidelines for proper grounding and, in particular, specifies that the cable
ground shall be connected to the grounding system of the building, as close to the point of cable entry as practical.”

This product utilizes tin-lead solder, and fluorescent lamp containing a small amount of mercury.
Disposal of these materials may be regulated due to environmental considerations. For disposal or
recycling information, please contact your local authorities or the Electronic Industries Alliance:
www.eia.org

IMPORTANT:
To aid reporting in case of loss or theft, please
record the TV’s model and serial numbers in the
space provided. The numbers are located at the
rear of the TV.

Model No.:

Serial No.:

U.S.A. ONLY

2

DEAR SHARP CUSTOMER

Thank you for your purchase of the Sharp LCD Color TV product. To ensure safety and
many years of trouble-free operation of your product, please read the Safety Precau­tions carefully before using this product.

IMPORTANT SAFETY PRECAUTIONS

Electricity is used to perform many useful functions, but it can also cause personal injuries and property
damage if improperly handled. This product has been engineered and manufactured with the highest
priority on safety. However, improper use can result in electric shock and/or fire. In order to prevent
potential danger, please observe the following instructions when installing, operating and cleaning the
product. To ensure your safety and prolong the service life of your LCD color TV product, please read
the following precautions carefully before using the product.

■ Read instructions—All operating instructions must be read and understood before the product is

operated.

■ Keep this manual in a safe place—These safety and operating instructions must be kept in a

safe place for future reference.

■ Observe warnings—All warnings on the product and in the instructions must be observed

closely.

■ Follow instructions—All operating instructions must be followed.
■ Attachments—Do not use attachments not recommended by the manufacturer. Use of inad-

equate attachments can result in accidents.

■ Power source—This product must operate on a power source specified on the specification

label. If you are not sure of the type of power supply used in your home, consult your dealer or
local power company. For units designed to operate on batteries or another power source, refer
to the operating instructions.

■ Power cord protection—The power cords must be routed properly to prevent people from

stepping on them or objects from resting on them. Check the cords at the plugs and product.

■ If the AC adapter is misplaced or needs to be replaced, obtain the same type of adapter from a

SHARP service center or your dealer.

■ Overloading—Do not overload AC outlets or extension cords.

Overloading can cause fire or electric shock.

■ Entering of objects and liquids—Never insert an object into the product through vents or open-

ings. High voltage flows in the product, and inserting an object can cause electric shock and/or
short internal parts. For the same reason, do not spill water or liquid on the product.

■ Servicing—Do not attempt to service the product yourself. Removing covers can expose you to

high voltage and other dangerous conditions. Request a qualified service person to perform
servicing.

■ Repair—If any of the following conditions occurs, unplug the power cord from the AC outlet, and

request a qualified service person to perform repairs.
a.When the power cord or plug is damaged.
b.When a liquid was spilled on the product or when objects have fallen into the product.
c. When the product has been exposed to rain or water.
d.When the product does not operate properly as described in the operating instructions.

Do not touch the controls other than those described in the operating instructions. Improper

adjustment of controls not described in the instructions can cause damage, which often

requires extensive adjustment work by a qualified technician.
e.When the product has been dropped or damaged.
f. When the product displays an abnormal condition. Any noticeable abnormality in the product

indicates that the product needs servicing.

■ Replacement parts—In case the product needs replacement parts, make sure that the service

person uses replacement parts specified by the manufacturer, or those with the same character­istics and performance as the original parts. Use of unauthorized parts can result in fire, electric
shock and/or other danger.

■ Safety checks—Upon completion of service or repair work, request the service technician to

perform safety checks to ensure that the product is in proper operating condition.

■ Wall or ceiling mounting—When mounting the product on a wall or ceiling, be sure to install the

product according to the method recommended by the manufacturer.

■ Polarization—This AC adapter may be equipped with a polarized alternating current line plug (a

plug having one blade wider than the other). This plug will fit into the power outlet only one way.
This is a safety feature. If you are unable to insert the plug fully into the outlet, try reversing the
plug. If the plug should still fail to fit, contact your electrician to replace your obsolete outlet.
Do not defeat the safety purpose of the polarized plug.

3

IMPORTANT SAFETY PRECAUTIONS (Continued)

■ Cleaning—Unplug the power cord from the AC outlet before

cleaning the product. Use a damp cloth to clean the product.
Do not use liquid cleaners or aerosol cleaners.

■ Water and moisture—Do not use the product near water,

such as bathtub, washbasin, kitchen sink and laundry tub,
swimming pool and in a wet basement.

■ Stand—Do not place the product on an unstable cart, stand,

tripod or table. Placing the product on an unstable base can
cause the product to fall, resulting in serious personal
injuries as well as damage to the product. Use only a cart,
stand, tripod, bracket or table recommended by the manu­facturer or sold with the product. When mounting the product
on a wall, be sure to follow the manufacturer’s instructions.
Use only the mounting hardware recommended by the
manufacturer.

■ When relocating the product placed on a cart, it must be

moved with utmost care. Sudden stops, excessive force and
uneven floor surface can cause the product to fall from the
cart.

■ Ventilation—The vents and other openings in the cabinet are

designed for ventilation. Do not cover or block these vents
and openings since insufficient ventilation can cause over­heating and/or shorten the life of the product. Do not place
the product on a bed, sofa, rug or other similar surface,
since they can block ventilation openings. This product is not
designed for built-in installation; do not place the product in
an enclosed place such as a bookcase or rack, unless
proper ventilation is provided or the manufacturer’s instruc­tions are followed.

■ The LCD panel used in this product is made of glass.

Therefore, it can break when the product is dropped or
applied with impact. Be careful not to be injured by broken
glass pieces in case the LCD panel breaks.

■ Heat sources—Keep the product away from heat sources

such as radiators, heaters, stoves and other heat-generating
products (including amplifiers).

■ The LCD panel is a very high technology product with 921,600 thin film transistors, giving you fine

picture details.

Occasionally, a few non-active pixels may appear on the screen as a fixed point of blue, green or red.
Please note that this does not affect the performance of your product.

4

IMPORTANT SAFETY PRECAUTIONS (Continued)

■ If an outside antenna is connected to the television equipment, be sure the antenna system is

grounded so as to provide some protection against voltage surges and built-up static charges.
Section 810 of the National Electrical Code provides information with respect to proper grounding
of the mast and supporting structure, grounding of the lead-in wire to an antenna discharge unit,
size of grounding conductors, Iocation of antenna-discharge unit, connection to grounding elec­trodes, and requirements for the grounding electrode.

EXAMPLE OF ANTENNA GROUNDING AS PER

NATIONAL ELECTRICAL CODE

ANTENNA
LEAD IN
WIRE

GROUND
CLAMP

ANTENNA

ELECTRIC
SERVICE
EQUIPMENT

NEC—NATIONAL ELECTRICAL CODE

GROUND CLAMPS
POWER SERVICE GROUNDING

ELECTRODE SYSTEM
(NEC ART 250, PART H)

DISCHARGE UNIT
(NEC SECTION 810-20)

GROUNDING CONDUCTORS
(NEC SECTION 810-21)

■ For added protection for this television equipment during a

lightning storm, or when it is left unattended and unused for
long periods of time, unplug it from the wall outlet and
disconnect the antenna. This will prevent damage to the
equipment due to lightning and power-line surges.

■ An outside antenna system should not be located in the

vicinity of overhead power lines or other electric light or
power circuits, or where it can fall into such power lines or
circuits. When installing an outside antenna system, extreme
care should be taken to keep from touching such power
lines or circuits as contact with them might be fatal.

5

CONTENTS

DEAR SHARP CUSTOMER .............................................................................................................3

IMPORTANT SAFETY PRECAUTIONS .......................................................................................3-5

SUPPLIED ACCESSORIES ............................................................................................................. 7

PREPARATION............................................................................................................................8-10

Using the Remote Control .........................................................................................................8

Batteries for the Remote Control .............................................................................................. 8

Power Connection ...................................................................................................................... 9

Antenna Connection .............................................................................................................9, 10

FRONT AND REAR CONTROL OPTIONS ............................................................................. 11-13

Removing the Back Cover ....................................................................................................... 13

Listening with Headphones .....................................................................................................13

REMOTE CONTROL ...................................................................................................................... 14

BASIC OPERATION ................................................................................................................. 14-17

Turning on POWER................................................................................................................... 15

Switching TV/VIDEO [AV1/AV2/COMPONENT/TV] Modes ................................................... 15

Sound Volume ...........................................................................................................................16

ON/OFF Standby ....................................................................................................................... 16

Changing the Channels............................................................................................................ 17

SELECTING MENU ITEMS ............................................................................................................18

ADJUSTMENT .......................................................................................................................... 19-34

Adjusting the SLEEP TIMER Settings ....................................................................................19

Adjusting the BRIGHTNESS Settings..................................................................................... 20

Adjusting the LANGUAGE Settings........................................................................................ 21

Adjusting the VIDEO ADJUST Settings ...........................................................................22, 23

Adjusting the PRESET Settings ..............................................................................................24

SET UP .................................................................................................................................25, 26

Adjusting the BLUE SCREEN Settings .................................................................................. 27

Adjusting the CLOSED CAPTION Settings ............................................................................28

Adjusting the V-CHIP Settings .......................................................................................... 29-34

CONNECTING WITH EXTERNAL DEVICES .......................................................................... 35-37

TROUBLESHOOTING ..............................................................................................................38, 39

SPECIFICATIONS........................................................................................................................... 40

DIMENSIONAL DRAWINGS .......................................................................................................... 41

Page

6

SUPPLIED ACCESSORIES

Make sure the following accessories are provided with the product.

Operation Manual Remote Control

M
EN

U

Printed on post-consumer recycled paper.
Imprimé sur du papier recyclé.

TINS-7604CEN1

Antenna Cable

LC-20B2UA

LCD COLOR TELEVISION
TÉLÉVISEUR COULEUR À

ÉCRAN À CRISTAUX
LIQUIDES (LCD)

OPERATION MANUAL
MODE D’EMPLOI

Printed in Japan

Imprimé au Japon

TINS-7604CEN1

02P01-JKK

ENGLISH

FRANÇAIS

RRMCG1559CESA

RRMCG1664CESA

AC Cord

QCNWG0003CEPA

AC Adapter

UADP-0212CEZZ

UADP-0243CEPZ UBATU0026GEZZ LHLDW0109CESA

“AAA” size (UM/SUM-4)

Dry Battery (×2)

UBATU0026GEZZ

QACCD3088CEZZ

QACCD3097CEPA

Cable Clamp (×2)

LHLDW1028GEZZ

7

PREPARATION



Using the Remote Control

■ Use the remote control by pointing it towards the remote sensor window.

Objects between the remote control and sensor window may prevent
proper operation.

Cautions regarding use of remote control

■ Do not expose the remote control to shock.

In addition, do not expose the remote control to liquids, and do not place
in an area with high humidity.

■ Do not install or place the remote control under direct sunlight. The heat

may cause deformation of the unit.

■ The remote control may not work properly if the remote sensor window

of the main unit is under direct sunlight or strong lighting. In such a
case, change the angle of the lighting or LCD TV set, or operate the
remote control closer to the remote sensor window.

Batteries for the Remote Control

If the remote control fails to operate the LCD color TV functions, replace the batteries in the remote
control.

1 Open the battery

cover.

2 Insert batteries (two “AAA”

(UM/SUM-4) size batteries,
supplied with product).

3 Close the battery

cover.

ー

＋

＋

ー

■ Slide the cover while

pressing down.

Caution!

Cautions regarding batteries

Improper use of batteries can result in a leakage of chemicals and/or explosion. Be sure to follow the
instructions below.

• Place batteries with their terminals corresponding to the (+) and (–) indications.

• Different types of batteries have different characteristics. Do not mix batteries of different types.

• Do not mix old and new batteries. Mixing old and new batteries can shorten the life of new

batteries and/or cause old batteries to leak chemicals.

• Remove batteries when they become weak.
Chemicals that leak from batteries can cause a rash. If chemical leakage is found, wipe with a
cloth.

• The batteries supplied with the product may have a shorter life expectancy due to storage conditions.

• If the remote control is not used for an extended period of time, remove the batteries from the remote

control.

■ Place the batteries with their

terminals corresponding to
the (+) and (–) indications in
the battery compartment.

8

Power Connection

PREPARATION (Continued)

Connect to the DC input

R
E

OW
P

N

AI

M

EO

ID

/V

TV

U

EN

HM

C

L

VO

terminal of the product.

Plug into AC outlet.

Household power outlet

AC adapter

AC cord

To DC input terminal
(DC 13V)

Notes:

■ Use a commercially available AC plug adapter, if necessary, depending on the design of the wall outlet.
■ Always turn the main POWER switch of the LCD TV set to off when connecting the AC adapter.
■ Always unplug the AC adapter from the product and power outlet when not using for a long period of time.

Antenna Connection

CABLE TV (CATV) CONNECTION

• A 75-ohm coaxial cable connector is built into the set for easy hookup. When connecting the 75­ohm coaxial cable to the set, screw the 75-ohm cable to the ANT. terminal.

• Some cable TV companies offer “premium pay channels”. Since the signals of these premium pay
channels are scrambled, a cable TV converter/descrambler is generally provided to the subscriber
by the cable TV company. This converter/descrambler is necessary for normal viewing of the
scrambled channels. (Set your TV to channel 3 or 4, typically one of these channels is used. If this
is unknown, consult your cable TV company.) For more specific instructions on installing cable TV,
consult your cable TV company. One possible method of utilizing the converter/descrambler
provided by your cable TV company is explained below.

Please note: An RF switch provided with two inputs (A and B) is required (not supplied).

“A” position on the RF switch (not supplied) : You can view all unscrambled channels by using the

“B” position on the RF switch (not supplied) : You can view the scrambled channels via the converter/

RF switch (not supplied)

OUT

Cable TV converter/

descrambler

(not supplied)

Note:

■ Consult your SHARP Dealer or Service Center for the type of splitter, RF switch or combiner that might be

required.

TV’s channel keys.

descrambler by using the converter’s channel keys.

Two-set

IN

signal
splitter
(not
supplied)

Cable TV Line

9

PREPARATION (Continued)

W

Antenna Connection (Continued)

ANTENNAS

• The antenna requirements for good color television reception are more important than those for black & white
television reception. For this reason, a good quality outdoor antenna is strongly recommended.
The following is a brief explanation of the type of connections that are provided with the various antenna
systems.

1. A 75-ohm system is generally a round cable with F-type
connector that can easily be attached to a terminal without
tools (not supplied).

75-ohm coaxial cable (round)

2. A 300-ohm system is a flat “twin-lead” cable that can be
attached to a 75-ohm terminal through a 300-75-ohm
adapter (not supplied).

300-ohm twin-lead cable (flat)

OUTDOOR ANTENNA CONNECTION

• Use one of the following two diagrams if you connect an outdoor antenna.
A: Using a VHF/UHF combination outdoor antenna.
B: Using separate VHF and/or UHF outdoor antennas.

• Connect the outdoor antenna cable lead-in to the ANT. terminal on the rear of the TV set.

A. Combination VHF/UHF Antenna

300/75-ohm

adapter

PO

AIN
M

O

IDE

V/V
T

U

EN

CH M

OL

V

To antenna input
terminal

VHF/UHF

antenna

300-ohm
twin-lead

(not supplied)

F-type connector

VHF/UHF

antenna

or

75-ohm

coaxial cable

Antenna cable (supplied)

B. Separate VHF and/or

UHF Antennas

Combiner

(not supplied)

OUT IN

antenna

300-ohm
twin-lead

300-ohm
twin-lead

75-ohm
coaxial cable

UHF

VHF

antenna

or

10

FRONT AND REAR CONTROL OPTIONS

Main unit (front view)

Upper control panel

Speaker

VOL

CH

MENU TV/VIDEO MAIN POWER

MAIN POWER
TV/VIDEO

MENU
CH ( )/( )

VOL (–)/(+)

Speaker

To change the vertical
angle of the LCD TV set,
tilt the screen up to 5
degrees forward or 10
degrees backward. The
TV set can also be
rotated 50 degrees
horizontally. Please adjust
the angle so that the TV
set can be watched most
comfortably.

POWER

SLEEP

SLEEP indicator

The SLEEP indicator lights up red when
the SLEEP TIMER is set to on.

POWER indicator

Remote sensor window

Note:

■ TV/VIDEO, CH ( )/( ), VOL (+)/(–), and MENU on the main unit have the same functions as the same buttons

on the remote control. Fundamentally, this operation manual provides a description based on operation with the
remote control.

A green indicator lights when the power is
on and a red indicator lights when in the
standby mode (the indicator will not light
when the main power is off).

11

FRONT AND REAR CONTROL OPTIONS (Continued)

Main unit (rear view)

VIDEO

AV-IN2/OUT

L

AUDIO

R

COMPONENT

Y

B

P

R

P

L

AUDIO

R

VIDEO
AUDIO (L)
AUDIO (R)
Y
PB
PR
AUDIO (L)
AUDIO (R)

AV-IN2/OUT

COMPONENT

ER

OW

IN P
A

M

O
E

ID
/V

V
T

U

N
E

HM

LC

VO

12

AV-IN1

AUDIO (L)

AUDIO (R)

HEADPHONE

Antenna terminal

POWER INPUT
(DC 13V)

VIDEO

S-VIDEO

VIDEO

L

AUDIO

R

S-VIDEO

HEAD

PHONE

ANT.

POWER

INPUT

DC13V

AV-IN1

FRONT AND REAR CONTROL OPTIONS (Continued)

CH

M

Removing the Back Cover

■ Before connecting a connection cord into the rear terminal, remove the

back cover. Push in the tab and pull out the back cover carefully.

■ To mount the cover, insert the 2 hooks on the bottom of the cover

into the cabinet and press on the upper part of the back cover until
the tab locks in place with a click.

Listening with Headphones

■ Plug the headphone mini-plug into the HEADPHONE jack located on the rear of the TV set.

EO

D
I

TV/V

U

H MEN
C

L

VO

L

VO

▼ On-screen display

< Rear terminal

VOLUME

60

Headphones

Notes:

■ Headphones are not included in the supplied accessories.
■ No sound will be heard from the main unit speakers when a headphone mini-plug is connected into the

HEADPHONE jack.

13