Samsung HMX-H104BN, HMX-H105BN, HMX-H106SN, HMX-H100N User Manual

HMX-H100N

HMX-H104BN

HMX-H105BN

HMX-H106SN

High Definition Digital Camcorder

user manual

imagine the possibilities

Thank you for purchasing this Samsung product. To receive more complete service, please register

your product at

www.samsung.com/register

key features of your HD camcorder

The HD camcorder is capable of recording and playing back both Full HD (high definition: 1920x1080) and Standard Definition (SD) image quality. Select the recording image quality, Full HD (high definition) or SD (standard definition), before recording.

ENJOYING IMAGES WITH FULL HIGH DEFINITION (HD) QUALITY

You can view recorded movies with Full HD (high definition) image quality.

•This HD camcorder offers 1080i resolution with a sharper image than previous SD camcorders (480i). It also supports widescreen recording with an aspect ratio of 16:9.

•Recordings made in Full HD (high definition) image quality will fit widescreen (16:9) HDTVs.

If your TV is not a high definition TV, movies with HD (high definition) image quality will be displayed with SD (standard definition) image quality.

-To enjoy Full HD-quality images, you will need a TV supporting 1920x1080i input. (Refer to the user manual of your TV.)

-To enjoy HD-quality images, use an HDMI (optional) or Component/AV (Y/PB/PR, Audio L/R) cable.

When using the Component/AV cable in a regular video connection (Video, Audio L/R) to your TV, HD-quality images cannot be viewed and are down-converted to SD (Standard Definition).

•The image is recorded in 720x480p when the quality is set to SD in the HD camcorder.

Movies recorded at SD (standard definition) image quality cannot be converted to HD (high definition).

Full HD (high definition) image quality: 60i (interlaced)

SD (standard definition) image quality: 60i (interlaced)

1920

		1080i	720				480i
<1080i / 16:9 Full high definition camcorder>			<480i / normal digital camcorder>

Image resolution: about 6 times that of previous SD camcorders (480i).

ii_ English

FEATURES OF YOUR NEW HD CAMCORDER

2.2 Mega pixel (Gross) CMOS sensor

1/4.1” CMOS sensor provides stunning detail and clarity with exceptional video (1920 lines of horizontal resolution-HD mode or 720 lines of horizontal resolution-SD mode) and still image performance (4.6 mega pixels).

Unlike traditional CCD imagers, CMOS sensors require less power, providing better battery performance.

SSD (SOLID STATE DRIVE) adopted as built-in storage media (HMX-H104BN/HMX-H105BN/HMX-H106SN only)

SSD based on fl ash memory has been adopted as built-in memory for the camcorder.

SSD helps the camcorder boot, read data and operate the software much faster than normal HDD (Hard Disk Drives).

Also, SSD is very stable, durable and makes less noise while in operation. It is environment-friendly because low electric power is required.

H.264 (MPEG4 part10/AVC) encoding

The latest video compression technology, H.264 uses a high compression rate to sharply increase the recordable time with the same size storage.

HDMI interface (Anynet+ supported)

• If you have an HDTV with an HDMI jack, you can enjoy a clearer and sharper image when compared to a standard defi nition TV.

•This HD camcorder supports Anynet+.

Anynet+ is an AV network system that enables you to control all connected Samsung

AV devices with an Anynet+ supported Samsung TV remote control. Refer to the corresponding TV’s user manual for more details.

2.7” wide (16:9) touch panel LCD screen (230K pixels)

The 2.7” wide (16:9) LCD screen provides excellent viewing clarity with improved resolution. The 230K pixel LCD screen rotates up to 270 degrees for multiple viewing angles providing sharp, detailed images for monitoring or playback, and the widescreen format makes shooting in 16:9 mode and composing shots even easier.

Touch panel adopted

You can play recorded images and set functions by simply tapping on the LCD screen.

Swivel handle for free style shooting

You can adjust the swivel handle’s angle up to 180° to suit the recording situation.

Built-in editing software (Intelli-studio)

Anynet+ supported

AV

DC

IN

Editing software is stored in this camcorder. Connecting the camcorder to a Windows computer using USB cable runs the editing software application. The application enables playback, editing and sharing of the recordings.

English _iii

safety warnings

What the icons and signs in this user manual mean;

Means that death or serious personal injury is a risk.

WARNING

Means that there is a potential risk for personal injury or material damage.

CAUTION

	To reduce the risk of fire, explosion, electric shock, or personal injury when using your HD
CAUTION	camcorder, follow these basic safety precautions:

Means hints or referential pages that may be helpful when operating the HD camcorder.

These warning signs are here to prevent injury to you and others.

Please follow them explicitly. After reading this section, keep it in a safe place for future reference.

important safety instructions

CAUTION

RISK OF ELECTRIC SHOCK

DO NOT OPEN

CAUTION: TO REDUCE THE RISK OF ELECTRIC SHOCK,

DO NOT REMOVE COVER (OR BACK).

NO USER-SERVICEABLE PARTS INSIDE

REFER SERVICING TO QUALIFIED SERVICE PERSONNEL.

Warning

This symbol indicates that dangerous voltage consisting a risk of electric shock is present within this unit.

This symbol indicates that there are important operating and maintenance instructions in the literature accompanying this unit.

To Reduce The Risk Of Fire Or Electric Shock, Do Not Expose This Apparatus To Rain Or Moisture.”

Caution

Apparatus shall not be exposed to dripping or splashing and no objects filled with liquids, such as vases, shall be placed on the apparatus. To disconnect the apparatus from the mains, the plug must be pulled out from the mains socket, therefore the mains plug shall be readily operable.

iv_ English

1.Read these instructions.

2.Keep these instructions.

3.Heed all warnings.

4.Follow all instructions.

5.Do not use this apparatus near water.

6.Clean only with dry cloth.

7.Do not block any ventilation openings. Install in accordance with the manufacturer’s instructions.

8.Do not install near any heat sources such as radiators, heat registers, stoves, or other apparatus (including amplifiers) that produce heat.

9.Do not defeat the safety purpose of the polarized or grounding-type plug. A polarized plug has two blades with one wider than the other. A grounding type plug has two blades and a third grounding prong. The wide blade or the third prong are provided for your safety. If the provided plug does not fit into your outlet, consult an electrician for replacement of the obsolete outlet.

10.Protect the power cord from being walked on or pinched particularly at plugs, convenience receptacles, and the point where they exit from the apparatus.

11.Only use attachment/accessories specified by the manufacturer.

12. Use only with the cart, stand, tripod, bracket, or table specified by the manufacturer, or sold with the apparatus. When a cart is used, use caution when moving the cart/apparatus combination to avoid injury from tip-over.

13.Unplug this apparatus during lightning storms or when unused for long periods of time.

14.Refer all servicing to qualified service personnel. Servicing is required when the apparatus has been damaged in any way, such as power-supply cord or plug is damaged, liquid has been spilled or objects have fallen into the apparatus, the apparatus has been exposed to rain or moisture, does not operate normally, or has been dropped.

15.Apparatus shall not be exposed to dripping or splashing and no objects filled with liquids, such as vases, shall be placed on the apparatus.

16.VENTILATION:

Slots and openings in the cabinet are provided for ventilation to ensure reliable operation of the CAMCORDER and to protect it from overheating. These openings must not be blocked or covered.

Never place your CAMCORDER on a bed, sofa, rug, or other similar surface: on or near a radiator or heat register. This CAMCORDER should not be placed in a built-in installation such as a bookcase or rack unless proper ventilation is provided or the manufacturer’s instructions have been adhered to.

English _

important safety instructions

17.POWER SOURCES:

The CAMCORDER should be operated only from the type of power source indicated on the label. If you are not sure of the type of power supply at your home, consult your appliance dealer or local power company. A CAMCORDER is intended to be operated from battery power, or other sources, refer to the operating instructions.

18.GROUNDING OR POLARIZATION:

This CAMCORDER may be equipped with either a polarized 2-wire AC line plug (a plug having one blade wider than the other) or a 3-wire grounding type plug, a plug having a third (grounding) pin. If you are unable to insert the plug fully into the outlet, try reversing the plug. If the plug still fails to fit, contact your electrician to replace your outlet. Do not defeat the safety purpose of the polarized plug.

19.POWER-CORD PROTECTION:

Power-supply cords should be routed so that they are not likely to be walked on or pinched by items placed upon or against them, paying particular attention to cords or plugs, convenient receptacles, and the point where they exit from the unit.

20.OUTDOOR ANTENNA GROUNDING:

CAMCORDER, be sure the antenna or cable system is grounded to provide some protection against voltage surges and built-up static charges, Section 810 of the National Electrical Code, ANSI/NFPA No.

vi_ English

70-1984, provides information with respect to proper grounding of the mast and supporting structure, grounding of the lead-in wire and supporting structure, grounding of the mast and supporting structure, grounding of the lead-in wire to an antenna discharge unit, size of grounding to conductors, location of antenna-discharge unit, connection to grounding electrodes and requirements for the grounding electrode.

	ANTENNA
	LEAD IN
	WIRE
	GROUND
	CLAMP
	ANTENNA
	DISCHARGE UNIT
	(NEC SECTION 810-20)
ELECTRIC
SERVICE	GROUNDING CONDUCTORS
EQUIPMENT
	(NEC SECTION 810-21)
	GROUND CLAMPS
	POWER SERVICE GROUNDING
	ELECTRODE SYSTEM
	(NEC ART 250, PART H)

NEC NATIONAL ELECTRICAL CODE

See figure below.

21.LIGHTNING:

For added protection of this CAMCORDER during a lightning storm or when it is left unattended and unused for long periods of time, unplug it from the wall outlet and disconnect the antenna or cable system. This will prevent damage to the CAMCORDER due to lightning and powerline surges.

22.POWER LINES:

An outside antenna system should not be located in the vicinity of overhead power lines or other electric light or power circuits where it can fall into such power lines or circuits. When installing an outside antenna system, extreme care should be taken to keep from touching such power lines or circuits as contact with them might be fatal.

23.OVERLOADING:

Do not overload wall outlets and extension cords as this can result in a risk of fire or electric shock.

24.OBJECTS AND LIQUIDS:

Never push objects of any kind into this CAMCORDER through openings as they may touch dangerous voltage points or short out a part that could result in a fire or electric shock. Never spill liquids of any kind onto the CAMCORDER. Should spillage occur, unplug unit and have it checked by a technician before use.

25.SERVICING:

Do not attempt to service this CAMCORDER yourself. Opening or removing covers may expose you to dangerous voltage or other hazards. Refer all servicing to qualified service personnel.

26.DAMAGE REQUIRING SERVICE:

Unplug this CAMCORDER from the wall outlet and refer servicing to qualified service personnel under the following conditions:

a.When the power-supply cord or plug is damaged.

b.If any liquid has been spilled onto, or objects have fallen into the CAMCORDER.

c.If the CAMCORDER has been exposed to rain or water.

d.If the CAMCORDER does not operate normally by following the operating instructions, adjust only those controls that are covered by the operating

instructions. Improper adjustment of other controls may result in damage and will often require extensive work by a qualified technician to restore the CAMCORDER to its normal operation.

e.If the CAMCORDER has been dropped or the cabinet has been damaged.

f.When the CAMCORDER exhibits a distinct change in performance, this indicates a need for service.

27.REPLACEMENT PARTS:

When replacement parts are required, be sure the service technician has used replacement parts specified by the manufacturer and having the same characteristics as the original part. Unauthorized substitutions may result in fire, electric shock or other hazards.

28.SAFETY CHECK:

Upon completion of any service or repairs to this CAMCORDER, ask the service technician to perform safety checks to determine that the CAMCORDER is in safe operating order.

English _vii

important safety instructions

29.To prevent damage which may result in fire or shock hazard, do not expose this appliance to rain or moisture.

30.If this power supply is used at 240V ac, a suitable plug adaptor should be used.

31.This product is covered by one or more of the following U.S. patents:

5,060,220 5,457,669 5,561,649 5,705,762 5,987,417

6,043,912 6,222,983 6,272,096 6,377,524 6,377,531

6,385,587 6,389,570 6,408,408 6,466,532 6,473,736

6,477,501 6,480,829 6,556,520 6,556,521 6,556,522

6,578,163 6,594,208 6,631,110 6,658,588 6,674,697

6,674,957 6,687,455 6,697,307 6,707,985 6,721,243

6,721,493 6,728,474 6,741,535 6,744,713 6,744,972

6,765,853 6,765,853 6,771,890 6,771,891 6,775,465

6,778,755 6,788,629 6,788,630 6,795,637 6,810,201

6,862,256 6,868,054 6,894,963 6,937,552

USER INSTALLER CAUTION:

Your authority to operate this FCC certified equipment could be voided if you make changes or modifications not expressly approved by this party responsible for compliance to part 15 FCC rules.

NOTE:

Hg LAMP(S) INSIDE THIS PRODUCT CONTAIN MERCURY AND MUST BE RECYCLED OR DISPOSED OF ACCORDING

TO LOCAL, STATE OR FEDERAL LAWS. For details see lamprecycle.org, eiae.org, or call 1-800-Samsung (7267864)

CALIFORNIA USA ONLY

This Perchlorate warning applies only to primary CR (Manganese Dioxide) Lithium coin cells in the product sold or distributed ONLY in California USA

“ Perchlorate Material - special handling may apply, See www.dtsc.ca.gov/hazardouswaste/perchlorate.”

NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules.

These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio

frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to

radio communications. However, there is no guarantee that interference will not occur in a particular installation.

If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

-Reorient or relocate the receiving antenna.

-Increase the separation between the equipment and receiver.

-Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.

-Consult the dealer or an experienced radio/TV technician for help and for additional suggestions.

The user may find the following booklet prepared by the Federal Communications Commission helpful: “How to Identify and Resolve Radio-TV Interference Problems.” This Booklet is available from the U.S. Government Printing Office, Washington, D.C. 20402, Stock No. 004-000-00345-4.

FCC Warning

The user is cautioned that changes or modifications not expressly approved by the manufacturer could void the user’s authority to operate the equipment.

This device complies with Part 15 of FCC Rules. Operation is subject to the following two conditions;

(1)This device may not cause harmful interference, and

(2)This device must accept any interference received, including interference that may cause undesired operation.

viii_ English

precautions

Warning!

•This camcorder should always be connected to an AC outlet with a protective grounding connection.

•Batteries shall not be exposed to excessive heat such as sunshine, fire or the like.

Caution

Danger of explosion if battery is incorrectly replaced.

Replace only with the same or equivalent type.

If this power supply is used at 240V ac, a suitable plug adapter should be used.

important information on use

BEFORE USING THIS CAMCORDER

•This HD camcorder records video in H.264 (MPEG4 part10/AVC) format and in High (HD-VIDEO) and Standard resolution (SD-VIDEO).

•Please note that this HD camcorder is not compatible with other digital video formats.

•Before recording important video, make a trial recording.

Play back your trial recording to make sure the video and audio have been recorded properly.

•The recorded contents cannot be compensated for:

-Samsung cannot compensate for any damage caused when a recording cannot be played back because of a defect in the HD camcorder or memory card.

Samsung cannot be responsible for your recorded video and audio.

-Recorded contents may be lost due to a mistake when handling this HD camcorder or memory card, etc. Samsung shall not be responsible for compensation for damages due to the loss of recorded contents.

•Make a backup of important recorded data

Protect your important recorded data by copying the files to a PC. We also recommend you copy it from your PC to other recording media for storage. Refer to the software installation and USB connection guide.

English _ix

•Copyright: Please note that this HD camcorder is intended for individual use only.

Data recorded on the storage media in this HD camcorder using other digital/analog media or devices is protected by the copyright act and cannot be used without permission of the owner of copyright, except for personal enjoyment. Even if you record an event such as a show, performance or exhibition for personal enjoyment, it is strongly recommended that you obtain permission beforehand.

ABOUT THIS USER MANUAL

•Thank you for purchasing this Samsung Camcorder. Please read this user manual carefully before you use the camcorder and keep it handy for future reference. Should your camcorder fail to operate correctly, refer to Troubleshooting. page 119

•This User Manual covers models HMX-H100N, HMX-H104BN, HMX-H105BN, and HMX-H106SN.

The HMX-H104BN, HMX-H105BN, and HMX-H106SN have a 16GB, 32GB, and 64GB built-in flash memory respectively but also use memory cards.

The HMX-H100N does not have built-in flash memory and uses memory cards exclusively.

Although some features of HMX-H100N, HMX-H104BN, HMX-H105BN, and HMX-H106SN are different, they operate in the same way.

•Illustrations of model HMX-H105BN are used in this user manual.

•The screenshots are from Windows XP. The screens may vary depending on the operating system of the computer.

•The displays in this user manual may not be exactly the same as those you see on the LCD screen.

•Designs and specifications of the camcorder and other accessories are subject to change without any notice.

•The following terms are used in this manual:

-The terms ‘video’ and ‘movie images’ refer to one video unit from the point you press the Record start/stop button to start recording until you press again to pause the recording.

-The terms ‘photo’ and ‘still image’ are used interchangeably with the same meaning.

NOTES REGARDING TRADEMARKS

•All the trade names and registered trademarks mentioned in this manual or other documentation provided with your Samsung product are trademarks or registered trademarks of their respective holders.

•Windows® is registered trademark or trademark of Microsoft Corporation, registered in the United States and other countries.

•YouTube® is a trademark of Google Inc.

•Flickr® is a trademark of Yahoo.

•All the other product names mentioned here in may be the trademark or registered trademarks of their respective companies.

•Furthermore, “TM” and “R” are not mentioned in each case in this manual.

_ English

precautions when using

The safety precautions illustrated below are to prevent personal injury or material damages. Heed all instructions carefully.

	WARNING		Prohibited action.		Do not touch the product.		Unplug from the power supply.
	Means that death or serious
	personal injury is a risk.
	CAUTION		Do not disassemble the		This precaution must be kept.
	Means that there is a potential		product.
	risk for personal injury or
	material damage.

WARNING

Do not overload outlets or extension cords as this may result in abnormal heat or fire.

Using the camcorder at temperatures over 140°F(60° C) may result in fire. Keeping the battery at a high temperature may cause an explosion.

W

Do not allow water or metal and inflammable matter to enter the camcorder or AC power adaptor. Doing so may pose a fire hazard.

SAND

No sand or dust! Fine sand or dust entering the camcorder or AC power adaptor could cause malfunctions or defects.

I	L
O

No oil! Oil entering the camcorder or AC power adaptor could cause electric shock, malfunctions or defects.

Do not aim the LCD screen directly into the sun. Doing so could cause eye injuries, as well as lead to malfunctioning of internal parts of the product.

Do not bend the power-cord or damage the AC power adaptor by pressing on it with a heavy object. There may be a risk of fire or electric shock.

Do not disconnect the AC adaptor by pulling on its power-cord, as this could damage the power-cord.

English _xi

Do not use the AC adaptor if it has damaged, split or broken cords or wires. Doing so may cause fire or electric shock.

Never use cleaning fluid or similar chemicals. Do not spray cleaners directly on the camcorder.

Do not attempt to disassemble, repair, or reform the camcorder or the AC adaptor to avoid a risk of fire or electric shock.

When cleaning the AC adaptor, unplug the power-cord to avoid a risk of a malfunction or electric shock.

Do not connect the AC adaptor unless the plug can be fully inserted with no part of the blades exposed.

Keep the camcorder away from water when used near the beach or pool or when it rains. There is a risk of malfunction or electric shock.

Do not plug or unplug the power cord with wet hands. There is a risk of electric shock.

If the camcorder makes an abnormal sound, or smell or smokes, unplug the power-cord immediately and request service from a Samsung service center.

There is a risk of fire or personal injury.

Do not dispose of battery pack in a fire as it may explode.

Keep the used lithium battery or memory card out of the reach of children. If the lithium battery or memory card is swallowed by children, consult physician immediately.

Keep the power-cord unplugged when not in use or during lightning storms to prevent fire hazard.

If the camcorder malfunctions, detach immediately the AC adaptor or battery from the camcorder to avoid fire or injury.

xii_ English

precautions when using

CAUTION

Do not press the surface of the LCD with force, or hit it with a sharp object. If you push the LCD surface, display unevenness may occur.

Do not use the camcorder near direct sunlight or heating equipment. This will especially shorten the operation range of the remote control which uses infrared rays.

W

Do not drop or expose the camcorder, battery pack, AC adaptor or other accessories to severe vibrations or impact. This may cause a malfunction or injury.

Do not expose the camcorder to sand or water when recording at the beach or pool, or recording on a rainy day. Doing so may cause a malfunction or electric shock.

Do not use the camcorder on a tripod (not supplied) in a place where it is subject to severe vibrations or impact.

Do not leave the camcorder in a closed vehicle where the temperature is very high for a long time.

Do not expose the camcorder to soot or steam. Thick soot or steam could damage the camcorder case or cause a malfunction.

Do not use the camcorder near dense exhaust gas generated by gasoline or diesel engines, or corrosive gas such as hydrogen sulphide. Doing so may corrode the external or internal terminals, disabling normal operation.

E

D

I

C

I

T

C

E

S

N

I

Do not expose the camcorder to insecticide. Insecticide entering the camcorder could fail the product to operate normally. Turn the camcorder off and cover it with vinyl sheet, etc. before using insecticide.

English _xiii

Do not expose the camcorder to sudden changed in temperature or a humid place. There is also a risk of defect or electric shock when using outdoors during lightning storms.

Do not leave the LCD monitor open when not using the camcorder.

Do not place the camcorder with the open LCD screen down.

Do not hold the camcorder by the LCD monitor when lifting it. LCD monitor could detach and the camcorder may fall.

W

Do not wipe the camcorder body with benzene or thinner. The exterior coating could peel off or the case surface could deteriorate.

Do not use the camcorder near TV or radio. This could cause noise on the TV screen or in radio broadcasts.

W

Do not use the camcorder near strong radio waves or magnetism such as speakers and a large motor. Noise could enter video or audio that are being recorded.

Keep important data separately. Samsung is not responsible for data loss.

xiv_ English

Use Samsung-approved accessories only. Using products from other manufacturers may cause overheating, fire, explosion, electric shock or ersonal injuries caused by abnormal operation.

Place the camcorder on a stable surface and a place with ventilation openings.

contents

QUICK START GUIDE

GETTING TO KNOW YOUR

HD CAMCORDER

7

PREPARATION

11

BEFORE RECORDING

27

07 What’s included with your HD camcorder

08 Front & left view

09Right & top / bottom view

10Rear view

11Using the remote control

13Holding the HD camcorder

14Charging the battery pack

19Basic HD camcorder operation

21Screen indicators

24Using the Display () button

24Using the LCD screen

25Initial setting: time zone, date and time & OSD language

27Selecting the storage media (HMX-H104BN/HMX-H105BN/HMX-H106SN only)

28Inserting/ejecting a memory card

29Recordable time and number of images

30Selecting a suitable memory card

English _0

RECORDING

32

PLAYBACK

41

CONNECTION

48

USING THE MENU ITEMS

53

0 _ English

32 Recording movie images

34Taking photo images

35Recording with ease for beginners (EASY Q mode)

36Capturing still images during movie image recording (dual recording)

37Zooming

38Setting the anti-shake (OIS: optical image stabilizer)

39Using the built-in flash

40Capturing still images during movie images playback

41Changing the playback mode

42Playing movie images

45 Viewing photo images

48 Connecting to a TV

52Dubbing images from the camcorder to a VCR or DVD/HDD recorder

53Handling menus and quick menus

55 Menu items

58Quick menu items

59Recording menu items

79Playback menu items

81Setting menu items

contents

EDITING MOVIE IMAGES

93

IMAGE MANAGEMENT

99

PRINTING PHOTO IMAGES

102

93 Dividing a movie image

95Combining two movie images

96Playlist

99Protection from accidental erasure

100Deleting images

101Copying images (HMX-H104BN/HMX-H105BN/HMX-H106SN only)

102DPOF print setting

103Direct printing with a PictBridge printer

USING A COMPUTER	105	Checking your computer type
105	106	What you can do with a Windows computer
	107	Using the Intelli-studio program
	112	Using as a removable storage device

English _0

MAINTENANCE & ADDITIONAL	115	Maintenance
INFORMATION	116	Additional information
115	118	Using your HD camcorder abroad
TROUBLESHOOTING	119	Troubleshooting
SPECIFICATIONS	131	Specifications
WARRANTY

0 _ English

quick start guide

This quick start guide introduces the basic operation and features of your camcorder. See the reference pages below for more information.

Step 1

Preparation

• Charging the battery pack. page 14

• Setting the date/time and the OSD language.pages 25-26

• Setting the storage media (built-in memory or memory card). (HMX-H104BN/HMX-H105BN/HMX-H106SN only) page 27

Step 2

Recording

• Recording movie or photo images. pages 32, 34

W

T

Step 3

Playing back

•Selecting an image to play back from the thumbnail index views. pages 42, 45

•Viewing playback from your HD camcorder on your TV or PC.

pages 48, 107

INSERT

BATTERY PACK

English _05

Step 4

Connecting to a PC

• You can play back and edit recorded movies or photos

by using the built-in editing software (Intelli-studio) on your camcorder. Also, using Intelli-studio allows easy upload of recorded movies or photo

fi les to YouTube or Flickr. page 109

Step5

Easy Upload to YouTube or Flickr

• You can upload recorded movies or photos to YouTube or Flickr using Intelli-studio. page 109

Camcorder

Intelli-studio

06_ English

getting to know your HD camcorder

WHAT’S INCLUDED WITH YOUR HD CAMCORDER

Your new HD camcorder comes with the following accessories. If any of these items is missing from your box, call Samsung’s Customer Care Center.

The exact appearance of each item may vary by model.

Battery pack		AC power adaptor		Component/AV cable		USB cable
(IA-BP85NF)		(AA-E9 type)
				(AD39-00142D)		(AD39-00132D)
(AD43-00188A)		(AD44-00116B)

Quick start guide		Remote control & button		User manual CD		HDMI cable (Optional)
		type battery (CR2025)
(AD68-03496A)				(AD46-00224A)		(AD39-00159A)
		(AD59-00169A)

•The contents may vary depending on the sales region.

•Parts and accessories are available for purchase at your local Samsung dealer. To buy these, contact your nearest Samsung dealer. However, IA-BP85NF is not available from retailers. Use IA-BP85ST when purchasing the battery pack separately.

•A memory card is not included. See page 30 for memory cards compatible with your HD camcorder.

•Your HD camcorder includes the user manual CD and quick start guide (printed). For more detailed instructions, refer to the user manual (PDF) on the provided CD.

English _0

FRONT & LEFT VIEW

	4	1
		2
		3

1 Built-in fl ash

2 Remote control sensor

3 Lens

4 Recording indicator

Built-in speakerPower () button

Display () button

Be careful not to cover the lens during recording.

WARNING

EASY Q button

Anti-Shake (OIS) () button

Flash () button

TFT LCD screen (touch panel)

Recording start/stop button

Zoom (W/T) button

Q.MENU button

08_ English

getting to know your HD camcorder

RIGHT & TOP / BOTTOM VIEW

1 2 3

4

1 PHOTO button

2 Zoom (W/T) lever

3 Swivel handle

4 Internal microphone

Grip belt hook

Grip belt

Tripod receptacle

OPEN switch

Battery pack/Memory card coverBattery pack release switchBattery pack slot

Memory card slot

Be careful not to cover the internal microphone during recording.

WARNING

English _09

REAR VIEW

1 2 3 4

AV

DC

IN

1 Mode indicator

: Record mode (Movie/Photo) : Play mode

2 MODE button

3 Recording start/stop button

4 CHG (charging) indicator

Jack cover

HDMI jackUSB jack

DC IN jack

COMPONENT / AV jack

10_ English

preparation

This section provides information on using this HD camcorder; such as how to use the provided accessories, how to charge the battery, how to setup the operation mode and initial setup.

USING THE REMOTE CONTROL

	1
	2
	3
	4

The buttons on the remote control function the same as those on the HD camcorder.

1 REC (Recording start/stop) button

2 Display () button

3 Skip (/) button

4 Stop () button

MENU button

Control (	/	/	/ / ) buttons
PHOTO button
Zoom (W/T) button
Search (	/	) button

Slow playback () button

Play/Pause () button

Remove the insulation sheet before using the remote control!

Insulation sheet

English _11

Installing the button type battery (CR2025) in the remote control

1.Turn the battery holder counter clockwise (as indicated with () mark) using your

fi ngernail or a coin to open it.	1	2	3
• The battery holder opens.
2. Insert the battery into the battery holder with
the positive (+) terminal facing down and
press it fi rmly until you hear a locking sound.
3. Place the battery holder back in the remote
control, match its () mark with the () mark
on the remote control, and turn the battery		<Battery holder>
holder clockwise to lock it.

Precautions regarding the button type battery

•There is a danger of explosion if the button type battery is incorrectly replaced. Replace only with the same or equivalent type.

•Do not pick up the battery using tweezers or other metal tools. This will cause a short circuit.

•Do not recharge, disassemble, heat or immerse the battery in water, to avoid the risk of explosion.

Keep the button type battery out of the reach of the children.

WARNING Should any battery be swallowed, consult a doctor immediately.

12_ English

preparation

HOLDING THE HD CAMCORDER

Attaching the grip belt

Adjust the length of grip belt so that the HD camcorder is stable when you press the Recording start/stop button with your thumb.

Please note if the hand strap is adjusted too tight and you

WARNING use excessive force to insert your hand, the hand strap hook of the camcorder may be damaged.

1

2

Angle adjustment

Rotate the swivel handle to the most convenient angle. You can rotate it downward from 0° to 180°.

Please be careful not to turn the swivel handle backward WARNING as it may cause damage.

English _13

CHARGING THE BATTERY PACK

•Use the IA-BP85NF or IA-BP85ST battery pack only.

•The battery pack may be charged a little at the time of purchase.

•Be sure to charge the battery pack before you start using your HD camcorder.

Inserting the battery pack

1. Open the battery pack cover by sliding the OPEN switch to the left as shown in the fi gure.

2. Insert the battery pack into the battery pack slot until it softly clicks.

• Make sure that SAMSUNG logo is facing up and the camcorder is placed as shown in the fi gure.

3. Close the battery pack cover.

Ejecting the battery pack

1. Slide the Battery pack release switch and pull out the battery pack.

• Gently slide the Battery pack release switch in the direction as shown in the fi gure.

2. Close the battery pack cover.

• Additional battery packs are available at your local Samsung dealer.

• If the HD camcorder will not be in use for a while, remove the battery pack from the HD camcorder.

Use only Samsung-approved battery packs.

Do not use batteries from other manufacturers because, there is a danger of overheating, fi re or explosion. Samsung is not responsible for problems occuring due to using unapproved batteries.

14_ English

preparation

Charging the battery pack

1. Press the Power () button for about 1 second to turn off the power and close the LCD screen.

2. Open the jack cover and connect the AC power adaptor to the DC IN jack.

3. Connect the AC power adaptor to a wall socket.

4. Once charged, disconnect the AC power adaptor from the DC IN jack on your HD camcorder.

• Even with the power switched off, the battery pack will still discharge if it is left inserted in the HD camcorder.

• It is recommended you purchase one or more additional battery packs to allow continuous use of your HD camcorder.

•The battery pack is not charged during the power saving mode, which may keep the mode indicator on or fl ashing. Open the LCD screen and press the

Power () button to turn off the camcorder for charging. page 19

Charging indicator

The color of the CHG lamp indicates the power or charging state.

• If the battery pack has been fully charged, the charge indicator is green.

• If you are charging the battery, the color of the charge indicator is orange.

•If an error occurs while the battery pack in charging, the charging indicator blinks green.

•The battery pack is charged over 95% after about 1 hour and 50 minutes, and the indicator color changes to green. It takes about 2 hours for the battery pack to charge 100%.

<Charging indicator>

English _15

Battery level display

The battery level display shows the amount of battery power remaining in the battery pack.

	Battery level			State	Message
	indicator
				Fully charged	-
				30~50% used	-
				50~75% used	-
				75~90% used	-
				90~97% used	-
				Exhausted (fl ickers): The device will soon turn off.	-
				Change the battery pack as soon as possible.
	-			The device will be forced to turn off after 3 seconds.	“Low
					Battery”

Above fi gures are based on a fully charged battery pack at a normal temperature. Low ambient temperature may affect the use time.

STBY 00:00:00

[300Min]

9999

<Battery level display>

16_ English