RAYSTAR 114
Distributed by
Any reference to Raytheon or
RTN in this manual should be
interpreted as Raymarine.
The names Raytheon and RTN
are owned by the
Raytheon Company.
Combined GPS
& Differential
Beacon Receiver
Installation
Guide
Document number: 81151_3
Date: 4th Aug 1999
Installation Guide
1
IMPORTANT NOTICE
This device is only an aid to navigation. Its accuracy can be
affected by many factors, including equipment failure or defects,
environmental conditions and improper handling or use.
It is the user’s responsibility to exercise common prudence and
navigational judgement, and this device should not be relied upon
as a substitute for such prudence and judgement.
1. EMC Installation & Service Guidelines
All Raytheon equipment and accessories are designed to the best
industry standards for use in the leisure marine environment.
Their design and manufacture conforms to the appropriate
Electromagnetic Compatibility (EMC) standards, but correct
installation is essential to maintain EMC performance and CE
compliance. Although every effort has been taken to ensure that they
will perform under all conditions, it is important to understand what
factors could affect the operation of the product.
Installation
All Raytheon equipment and cables connected to it should be;
• At least 1m (3ft) from any equipment transmitting or cables carrying
radio signals eg. VHF radios, cables and antennas. In the case of
SSB radios, the distance should be increased to 2m (7ft).
• More than 2m (7ft) from the path of a radar beam.
• The equipment should be supplied from a different battery than the
one used for engine start. Voltage drops below 10.7V in the power
supply to our products can cause the equipment to reset. This will
not damage the equipment, but may cause the loss of some
information and can change the operating mode.
• Genuine Raytheon cables should be used at all times. Cutting and
rejoining these cables can compromise EMC performance and so
should be avoided unless doing so is detailed in the installation
manual.
2
Raystar 114
Check Before Going to Sea
• Always check the installation before going to sea to make sure that it
is not affected by radio transmissions, engine starting etc.
• In some installations, it may not be possible to prevent the
equipment from being affected by external influences. In general
this will not damage the equipment but can lead to it resetting, or
momentarily may result in faulty operation.
Servicing and Safety
• This product contains no user servicable parts.
• Raytheon equipment should be serviced only by authorised
Raytheon service engineers. They will ensure that service
procedures and replacement parts used will not affect performance.
There are no user serviceable parts in any Raytheon product.
• Always report any EMC related problem to your nearest Raytheon
dealer. We will use any such information to improve our quality
standards.
Installation Guide
3
2. Package Contents
Checking your Raystar 114 Package
The Raystar 114 Combined GPS and Differential Beacon Receiver
package contains the following standard items:
1. Raystar 114
2. Beacon Aerial
3. Ground screw with eyelet
4. Installation Guide including Warranty document
Items Missing?
If any of the above items are missing or damaged, please contact your
Raytheon dealer or our Product Support Department to obtain
replacement parts. Please note that missing or damaged items
cannot be replaced without proof of purchase.
Registering this Product
When you have checked that you have all of the listed components,
please take the time to complete the warranty document and return it to
your national distributor.
By returning this document you will receive prompt and expert
attention should you ever experience any difficulties with this product.
Also, your details are added to our customer database so that you
automatically receive new product brochures as and when they are
released.
Loading...