Camera Status Notification Application Instructions
When communication with the camera is disconnected, a notification E-mail is sent.
1.
2.
Click [Applications] on the menu page.
Click [E-mail Setup for Applications].
Data Entry Field
SMTP Server IP Address or Host |
Enter the sent mail (SMTP) server's address*1 or host |
Name |
name (1-255 characters)*2. |
POP3 Server IP Address or Host |
Enter the received mail (POP3) server's address*1 or |
Name |
host name (1-255 characters)*2. |
Login ID |
Enter the received mail (POP3) server's login ID.*3 |
Password |
Enter the received mail (POP3) server's password.*3 |
Reply E-mail Address*2 |
Enter the return destination's (sent source) E-mail |
|
address. It is recommended that you enter the |
|
administrator's E-mail Address. |
|
|
Destination E-mail Address*2 1 - |
Up to 5 E-mail destinations can be set. |
Destination E-mail Address 5 |
|
|
|
*1 Set 4 numbers (0-255) and 3 periods, in the form of 192.163.0.253 (However 0.0.0.0 or 255.255.255.255 cannot be used.)
*2 Only alphanumeric characters can be used. However, [Space], ["], ['], [#], [&], [%], [=], [+], [?], [<], [>], and [:] cannot be used.
*3 When POP3 authentication is required during mail forwarding, set it, checking with the network administrator or ISP.
3.Set each heading and click [Save].
4.Click [Restart].
5.Click [Applications] on the menu page.
6.Select the Camera Status Notification application from the Application list, and click [Setup].
7.Check the subject cameras for this application, and click [Save].
8.Click [Back].
9.Select the Camera Status Notification application from the Application list, and click [Execute].
10.Click [Refresh].
•When a mail is received at the set E-mail address to notify that Camera Status Notification has started, setup is complete.
Notes
•When there is a router set in between this product and the camera, you may be notified of a disconnection. In that case, uncheck that camera on the setup page, and cancel Camera Status Notification.
•Depending on the network status, it may take several minutes for the Camera Status Notification E-mail to arrive.
•If this product is not connected to the Internet, the Camera Status Notification E-mail will not be sent.
•Camera Status Notification is performed every 10 minutes, so a disconnection may not be detected for up to 10 minutes.
•Cameras registered by URL are not supported.