Installation Guide
External Power Adapter
Model EPS90W, EPS130W, and EPS200W
WARNING: Read this document first before connecting the new power adapter to a device.
Package Contents
•Power adapter
•Power cord (varies by region)
•Installation guide
Flexible PoE Power Budget
NETGEAR’s Gigabit Ethernet Unmanaged Switches, models GS108LP, GS108PP, GS116LP, and GS116PP, include a built-in PoE power selector switch.The power selector switch lets you connect a compatible power adapter to increase or decrease the PoE power available on the switch.
Note: Only connect the power adapter to a compatible NETGEAR switch listed in the following table.
Switch |
Power Adapter |
Power Adapter |
PoE+ Power |
|
Model |
Model |
Wattage |
Wattage |
|
GS108LP and |
EPS90W |
90W |
83W |
|
GS108PP |
|
|
|
|
EPS130W |
130W |
123W |
||
|
||||
|
|
|
|
|
GS116LP and |
EPS90W |
90W |
76W |
|
GS116PP |
|
|
|
|
EPS130W |
130W |
115W |
||
|
||||
|
|
|
|
|
|
EPS200W |
200W |
183W |
|
|
|
|
|
1. Register With the NETGEAR Insight App
Use the NETGEAR Insight app to register your new power adapter (and your switch if you haven’t already) to activate your warranty and access support.
1.On your iOS or Android mobile device or tablet, visit the app store, search for NETGEAR Insight, and download the latest version of the app.
2.Open the NETGEAR Insight app.
3.If you did not set up a NETGEAR account, tap Create NETGEAR Account and follow the onscreen instructions.
4.Enter the email address and password for your account and tap LOG IN.
5.To register the new power adapter, tap the menu in the upper left corner and select Register Any NETGEAR Device.
6.Scan the serial number barcode using the camera on your mobile device, or manually enter the 13-digit serial number.
7.Tap Go.
8.To register your switch, repeat Steps 5–7.
Loading...