Screen Sizes: 80” - 500" (5:4) Lateral color error: 14 µm max
TL-1ZH Throw Ratio: 1.5 - 2.5:1 F/#: 3.0 Distortion (full offset): 2% max
Screen Sizes: 80" - 500" (5:4) Lateral color error: 14 µm max
TL-2Z Throw Ratio: 2.5 - 4.0:1 F/#: 3.0 Distortion (full offset): 2% max
Screen Sizes: 80" - 500" (5:4) Lateral color error: 14 µm max
TL-4Z Throw Ratio: 4.0 - 7.0:1 F/#: 3.0 Distortion (full offset): 2% max
Screen Sizes: 80” - 500" (5:4) Lateral color error: 14 µm max
Notes
• For screen not indicated in the tables, use formulas below.
• If the figures in the tables do not match the results of formulas, use the figures in the tables.
• The ceiling must be strong enough to support the projector and the installation must be in accordance with any local building
codes.
• Distances are in inches, for millimeters multiply by 25.4
• Distances may vary ± 5%.
Formulas
Throw Distance = Screen Width (H) x Lens Magnification H = Screen Width (5:4) H = Screen Height (V) x 5/4
Note: Image has 5:4 aspect ratio. Take this into account when specifying a screen.
Lens Throw Distance Formula
TL-08SF: H x 0.84
TL-1ZH: (Wide) = H x 1.5 (Tele) = H x 2.5
TL-2Z: (Wide) = H x 2.5 (Tele) = H x 4.0
TL-4Z: (Wide) = H x 4.0 (Tele) = H x 7.0
Note: Do not use TL-1Z lens on SX10000, for optimal performance TL-1ZH should be used for 1.5-2.5:1 range.
Page1
Ver 1.6
Page 2
Page 3
Page 4
Page 5
Page 6
Page 7
Page 8
Page 9
Page 10
V = Screen Height (5:4) V = Screen Width (H) x 4/5
Screen Diagonal (5:4) = Screen Height (V) x 6.4/4
Visual Systems
SX10000 Installation Data
Desktop and Ceiling Ver 1.6
Projection Distance and Screen Size for No Offset Installation
The following shows the proper relative positions of the projector and screen.
Dimensions are in inches. For millimeters multiply by 25.4.
Desktop (no offset/optimum condition)
1.69"
Throw Distance
Screen Ctr
11.26"
Lens Offset from
Projector Ctr
Note: Image has 5:4 aspect ratio. Take this into account when specifying a screen.Note: Do not use TL-1Z lens on SX10000, for optimal performance TL-1ZH should be used for 1.5-2.5:1 range.
Note: For screen sizes not indicated on the table, use formulas on Page 1
SF Fixed LensZoom Lens
TL-08SFTL-1ZHTL-2ZTL-4Z
Page2
Visual Systems
SX10000 Installation Data
Desktop and Ceiling Ver 1.6
Projection Distance and Screen Size for Ceiling /With Offset
The following shows the proper relative positions of the projector and screen. Refer to the table to determine the position of
installation. Dimensions are in inches. For millimeters multiply by 25.4.
Ceiling /With Offset
Throw Distance
Vertical Offset
Screen Ctr
1.69"
Lens Offset from
Projector Ctr
Note: Image has 5:4 aspect ratio. Take this into account when specifying a screen.
Note: Do not use TL-1Z lens on SX10000, for optimal performance TL-1ZH should be used for 1.5-2.5:1 range.