302GB
AutoID Keyboard Wedge
User's Manual
Read this user's manual carefully prior to operating this product.
After reading, keep this manual in a safe place so that you can refer to it at any time.
Symbols
The following symbols alert you to important messages. Be sure to read these messages carefully.
Important Provides precautions about operations that must be performed.
Point |
Provides precautions on operations that can be easily mistaken. |
|
Reference Provides useful information or information that aids understanding of text descriptions.
Provides reference items and pages.
The AutoID Keyboard Wedge is software that converts data read by a code reader to keyboard output.
Code reader |
PC |
Serial communication
AutoID
Keyboard output
Keyboard
TCP communication
Wedge
Windows 8 (excluding Windows RT)
OS
Windows 7 professional (32-bit/64-bit)
Windows Vista Business/Ultimate SP2 or later (32-bit)
Windows XP SP3 or later (32-bit)
*Log in as a user that has administrator privileges.
*Use Microsoft IME or Microsoft Office IME for input.
• Serial communication: Communication via RS-232C or virtual COM (USB-COM). Communicates by specifying the number of COM connected to the code reader.
• TCP communication: Communication via Ethernet TCP.
Communicates by specifying the wait port number with the code reader set to client and with PC set to server.
1 Start up the AutoID Keyboard Wedge.
The icon is registered on the task tray.
2 Click the [Start] button after setup.
1 Right-click on the task tray.
2 Select [Exit].
*Clicking of the AutoID Keyboard Wedge will minimize the AutoID Keyboard Wedge.
To exit, be sure to perform exit operation from the task tray.
This section describes the items that can be set on the AutoID Keyboard Wedge.
(1) Communication
(2) Append data
(3) Edit data
(4) Special key conversion
(5) Received data
(1) Communication
The AutoID Keyboard Wedge starts operation with the set contents. To [Start] button launch the AutoID Keyboard Wedge at the start-up of PC, check "Run in
background at start-up".
Ethernet |
Check here when performing keyboard conversion of socket |
|
communication data via Ethernet. |
||
communication |
||
(Port No: 1024 to 65535) |
||
|
||
Serial |
Check here when performing keyboard conversion of serial |
|
communication |
communication data via RS-232C, etc. |
|
|
Set the time interval when inputting characters one by one. |
|
Data transmission |
(0 ms to 100 ms) |
|
interval |
If keyboard conversion data is dropped, the problem may be solved by |
|
|
increasing this value. |
|
(2) Append data |
||
|
|
|
|
|
|
Date |
Append date and time information. |
|
Partition mark |
Append partition mark. (0 to 1 character) |
|
Header |
Append characters at the beginning of data. (0 to 5 characters) |
|
Terminator |
Append characters at the end of data. (0 to 5 characters) |
Data format
Header |
Date |
Partition mark |
Read data |
Terminator |
|
|
|
|
|
(3) Edit data
Data can be output by dividing it into multiple blocks.
This function can be used when the number of fields is set to 1 or more.
Number of fields |
Specify how many pieces the data is divided to. |
|
(0 to 16) |
||
|
||
Partition mark |
Specify the partition mark of the block to output. |
|
(Default: "," (0x2D)) |
||
|
||
Edit data setting |
|
|
|
|
|
No. |
Specify the order of output for divided data. |
|
(1 to 16) |
||
|
||
Output start digit |
Specify start digit for data extraction. |
|
(1 to 999 digits)*1 |
||
Output length |
Specify the number of digits by byte to output from the output start digit. |
|
(1 to 999 digits)*1 |
||
Kanji conversion |
If data includes Japanese such as Hiragana or Kanji, set this to "ON" to |
|
output data by Japanese conversion. |
||
|
||
|
This converts characters included in the data to other character strings to |
|
Data replacement |
output. |
|
Maximum number of characters that can be specified as conversion |
||
|
||
|
target characters is 5. |
*1 "Output start digit" + "Output length" = 1000 (upper limit).
1 |
E SR KBD SOFT UM |