|
Contents • Contents FR |
|
||
1 |
TV adapter |
1 |
TV adapter |
|
2 |
PC adapter |
2 |
PC adapter |
|
3 |
USB cable |
3 |
USB cables |
1 |
4 |
USB splitter cable |
4 |
USB splitter cable |
2 |
5 |
HDMI cables (2) |
5 |
HDMI cables (2) |
3 |
6 |
Power adapter |
6 |
Power adapter |
4 |
7 |
Adapter stands (2) |
7 |
Adapter stands (2) |
5 |
8 |
PC adapter clip |
8 |
PC adapter clip |
6 |
|
|
|
FR |
7 |
|
|
|
|
8 |
|
|
|
|
9 |
|
|
|
|
: |
Wireless HDMI |
|
|
|
|
Quick Setup |
|
|
|
|
Wireless HDMI |
|
|
|
|
Quick Setup |
|
Note: You may need to upgrade |
Note: You may need to upgrade |
FR |
|
|
the software on your adapters to |
the software on your adapters to |
|
|
|
ensure compatibility with devices |
ensure compatibility with devices |
|
|
|
produced by other manufacturers. |
produced by other manufacturers. |
|
|
|
When it’s available, you can |
When it’s available, you can |
|
|
|
download updated software |
download updated software |
|
|
|
with installation instructions from |
with installation instructions from |
|
|
|
http://www.hp.com/support. |
http://www.hp.com/support. |
|
Components
Components FR
Reset button |
1 |
Reset button |
FR |
HDMI ports (2) |
2 |
HDMI ports (2) |
|
Power/upgrade port |
3 |
Power/upgrade port |
|
Menu button |
4 |
Menu button |
|
Power connector |
5 |
Power connector |
|
Source button |
6 |
Source button |
|
Upgrade port |
7 |
Upgrade port |
|
Power lights |
8 |
Power light |
|
Link status lights |
9 |
Link status light |
|
Wireless antenna |
: |
Antenna |
|
Regulatory and Safety Notices
Federal Communications Commission notice
This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation.
If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:
•Reorient or relocate the receiving antenna.
•Increase the separation between the equipment and receiver.
•Connect the equipment to an outlet on a circuit different from that to which the receiver is connected.
•Consult the dealer or an experienced radio or television technician for help.
Modifications
The FCC requires the user to be notified that any changes or modifications made to this device that are not expressly approved by HP may void the user’s authority to operate the equipment.
Cables
To maintain compliance with FCC Rules and Regulations, connections to this device must be made with shielded cables having metallic RFI/EMI connector hoods.
Declaration of Conformity for products marked with the FCC logo (United States
only)
This device complies with Part 15 of the FCC Rules. Operation is subject to the following 2 conditions:
1.This device may not cause harmful interference.
2.This device must accept any interference received, including interference that may cause undesired operation.
If you have questions about the product that are not related to this declaration, write to Hewlett-Packard Company
P. O. Box 692000, Mail Stop 530113 Houston, TX 77269-2000
For questions regarding this FCC declaration, write to Hewlett-Packard Company
P. O. Box 692000, Mail Stop 510101 Houston, TX 77269-2000
or call HP at 281-514-3333
To identify your product, refer to the part, series, or model number located on the product.
Products with wireless LAN devices or HP Mobile Broadband Modules
This device must not be co-located or operating in conjunction with any other antenna or transmitter.
WARNING! Exposure to Radio Frequency Radiation The radiated output power of this device is below the FCC radio frequency exposure limits. Nevertheless, the device should be used in such a manner that the potential for human contact is minimized during normal operation of tablet PCs and notebook computers.
To avoid the possibility of exceeding the FCC radio frequency exposure limits, human proximity to the antennas should not be less than 20 cm (8 inches), including when the computer display is closed.
CAUTION: When using IEEE 802.11a wireless LAN, this product is restricted to indoor use, due to its operation in the 5.15to 5.25-GHz frequency range. The FCC requires this product to be used indoors for the frequency range of 5.15 GHz to 5.25 GHz to reduce the potential for harmful interference to cochannel mobile satellite systems. High-power radar is allocated as the primary user of the 5.25to 5.35-GHz and 5.65to 5.85-GHz bands. These radar stations can cause interference with and/or damage to this device.
In some environments, the use of wireless devices may be restricted. Such restrictions may apply in hospitals, near explosives, in hazardous locations, and so on. If you are uncertain of the policy that applies to the use of this product, ask for authorization to use it before you turn it on.
Loading...