Gateway 910 User Manual

GWFS

GateWay

Fax

GFS Model 910

User's Guide

Systems, Inc.

Thank you for purchasing Model 910 "Auto Fax/STU Switch" from Gateway Fax Systems, Inc.

This will allow you to receive unclassified faxes automatically when used with your 90si Secure Fax Gateway

GFS 910 Installation Instructions

Line

90si Gateway

BstckPaiiel

Bf

Power

Secure TelepluoiLe

1. Install The STICK as shown in the diagram above.

2. 'Insure that your 90si is set for operation in the 2-Line, Dual-Mode-On configuration:
Switch 6 set for 2-Line (down on the left) and Switch 7 set for Dual-Mode ON (down on the right).

3. Apply power to the 90si, 910, Secure Telephone and Fax. "'"

rn

Fas

Tel L ine

Fax

Vokc 1

Power

Commercial

Fax Mtchime

GFS 910

AC Power

Line OuJtsile

'—' Pkjae Line

GFS 910 Operating Instructions

Sending a Secure Fax:

1. With fax idle, call from your Secure Phone.

2. Establish Secure-Data mode.

3. Begin Transmission (See 90si User's Guide

Section 3.3)

Receiving a Secure Fax:

2. Establish Secure-Data mode.

3. Stand-by, the Secure Fax will be received au

tomatically.

If you need assistance, please don't hesitate to call us, toll-free, at 1-877-951-9800 or

call our Secure Fax Test Line at 1-877-951-9814. We are STE & STU-III equipped.

GateWay Fax Systems, Inc.
Secure Facsimile Products

Virginia, USA

tel: [phone] toll free:

fax: [phone] email:

web: www.gwfs.com

877-951-9800

[e-mail]

Sending a Non-Secure Fax:

1. With the Secure Telephone idle.

2. Load document on your fax.

3. Dial remote fax number on your fax.

4. Press the START button on your fax.

Receiving a Non-Secure Fax:

1. No action required, receptions are automatic.1. Answer ringing Secure Telephone.

GateWay

GWFS

Fax

Systems, Inc.