FeiYu Tech QING Instructions Manual

Intelligent Gimbal for Camera

Instructions

EN V1.0

Catalogue

1. Overview ………………………………………………………… 2

2. Start to Use ……………………………………………………… 4

2.1 Charging……………………………………………………………………… 4

2.2 Unlock/Lock ………………………………………………………………… 5

2.3 Battery Installation ………………………………………………………… 5

2.4 Camera Installation and Balance ………………………………………… 6

2.5 Power On/O󽗈 ……………………………………………………………… 8

3. Function & Operation …………………………………………… 9

3.1 Function/Modes Introduction …………………………………………… 9

3.2 Function Operation of Remote Control ………………………………… 12

3.3 Remote Control Touch Screen …………………………………………… 16

3.4 Modes Setting ……………………………………………………………… 17

3.5 Gimbal Initialization ………………………………………………………… 21

4. Accessories ……………………………………………………… 22

4.1 Brushless Follow Focus (AKF II) …………………………………………… 22

4.2 Wireless MIC Kit …………………………………………………………… 23

5. Speci󽗉cations …………………………………………………… 25

Compatible Cameras for Reference …………………………… 26

Disclaimer …………………………………………………………… 28

2

QING is a professional gimbal for DSLR/mirrorless camera. It is compatible with
popular DSLR camera on the market. It is available to install on the tripod or
other carrier to extend its shooting function.

It has a oversized touch screen on remote control, allows users to switch work
modes, control rotating direction and set up parameters on it directly and visibly.
Users can also control camera's follow focus and zooming after connecting
camera to QING via cable.

Suggestion

Feiyu Qing includes below information, please read
the information before using the gimbal:

1. Quick start guide

2. Online instruction

3. Tutorial
The tutorial videos can be watched at FeiyuTech o󽗋cial
website https://www.feiyu-tech.com/play/
or scan the QR code.

www.feiyu-tech.com 12

1. Overview

* The product is NOT included the camera.

www.feiyu-tech.com 2

www.feiyu-tech.com 32

2. Start to Use

TIPS

· Please install the camera and balance it before power on the gimbal.

· Please do not touch tilt motor and gears to avoid gripping.

· When the battery is low, please charge the battery.

· When not in use, power o󽗈 the gimbal and then remove the batteries.

2.1 Charging

Please fully charge the dedicated battery before power on the gimbal

for the 󽗉rst time.

Please choose the suitable charger when quickly charging.

2.1.1 Charging for the Gimbal

Using USB 2.0 to Type-C cable to charge the dedicated battery, support 5V/3A
input.

Battery Indicator: All the 3 indicators turn on when battery is full

Function Indicator:
quickly 󽗊ashing: Low battery and please charge in time
slowly 󽗊ashing: Pan mode
constant on: Lock mode

www.feiyu-tech.com 4

2.1.2 Charging for the Remote Control

Using USB 2.0 to Micro cable to charge the remote control, support 5V/3A input.

2.2 Unlock/Lock

There is a position lock on the tilt axis, which is convenient for locking the
position, installation, storage.

Unlock the gimbal before powering on it.

2.3 Battery Installation

Please fully charge the dedicated battery before power on the

gimbal for the 󽗉rst time.

Install the battery: Push the battery in along the slot ①, and after that, the battery
lock ② will rebound to prevent battery from falling.

Remove the battery: Unlock the battery lock ② and pull the battery out.

www.feiyu-tech.com 54

①

②

2.4 Camera Installation and Balance

TIPS

· Make sure the battery and memory card are loaded before camera
installation.

· Before balancing the gimbal, the lens cover should be removed from
the camera and the memory card needs to be inserted to the camera to
complete all the cable connections to ensure that the camera is ready for
shooting.

· During balancing the gimbal, make sure the camera is power o󽗈 and the
gimbal is turned o󽗈.

· If add accessories after the balance is completed, please re-balance.

In order to get ideal shooting, please balance the gimbal before using. And the
gimbal with perfect balance will have longer battery life.

Step 1: Keep the gimbal horizontal as the figure shows, then lock the position
lock ①.

www.feiyu-tech.com 6

Step 2: Mount camera on ARCA quick release plate ②, and tighten it.

Step 3: Install the ARCA quick release plate on the quick release plate, and tighten
the ARCA quick release plate safety lock ③. Install the lens holder ④ and tighten
the thumb screw ⑤ to hold the lens 󽗉rmly.

Step 4: Unlock the position lock ①, and loose the thumb screw ⑥. Slide the
slide arm ⑦ to balance, and tighten the thumb screw ⑥ after the balancing is
completed.

If the camera can stay stable after moving your hand away, which means
balanced.

www.feiyu-tech.com 76

2.5 Power On/O󽗈

Please release the tilt motor lock before powering on.

Please do not touch tilt motor and gears to avoid gripping.

Steps:

(1) Gimbal:
Install the dedicated battery and long press the power button and release it when
the battery indicator and function indicator turn on together and hear the tone.
Long press again to power o󽗈.

(2) Remote Control:
Long press the power button, release it when the touch screen shows
Long press again to power o󽗈.

.

www.feiyu-tech.com 8

3. Function & Operation

3.1 Function/Modes Introduction

① Pan Mode (Default mode)
When attached on the other equipment, the tilt direction is 󽗉xed, and the camera
direction moves according to the rotation of the equipment.

② Lock Mode
When attached on the other equipment, the tilt direction is fixed, the camera
direction doesn't move while rotating the equipment.

③ Reset
Reset to Pan mode, tilt and pan axis reset to initial position.

www.feiyu-tech.com 98

④ Time-lapse photography
User can set the start and stop shooting route on remote control, QING will auto
rotate according the setting. Refer to P17 3.4.1.

TIPS:

a. After click "Start" under time-lapse mode, gimbal will record all the movements
before it stop. Do not repeat unnecessary actions during time-lapse.

b. The parameter a/b fps indicates how long the video will be play under
the condition you set below. (Total duration and numbers of photos are
automatically calculated by the gimbal without setting).

c. Please set the parameter for pan/tilt/interval/stop time.
Interval time means the time that between two shooting. Stop time means the
exposure time while taking photos.

⑤ Fast rotate
The rotating speed/interval time/stop time can be set. QING will rotate according
to the setting parameter. No need to frequently manually set up during shooting.
Refer to P18 3.4.2.

www.feiyu-tech.com 10

⑥ Wide Angle
For grand scenes or special scenes, the gimbal supports wide angle shooting ( 9
square panorama) can be assemble into 1 picture later on computer or Feiyu ON
App. Refer to P19 3.4.3.

⑦ Pan Shoot
Gimbal will rotate precisely (pan rotate 180°or 360° for panorama) and take
pictures according to the setting. Refer to P19 3.4.4.

Take 180° for instance:

www.feiyu-tech.com 1110

To get more videography skills with gimbal and it's tutorial, please kindly visit
our o󽗋cial of Remote Control or download Feiyu ON App.
http://www.feiyu-tech.com

3.2 Function Operation of Remote Control

3.2.1 Power Button Operation

Function Button

Operation

1. Remote control power
ON/OFF

Power Button

2. Lock/unlock screen Short press in home page

3. Return to home page Short press in other pages

3.2.2 Trigger Button Operation

Function Button

Operation

Trigger Button

Exit current setting state, the knob
and turntable can control pan and
tilt axis instead of adjusting the
parameter setting.

Function Instruction

Long press (Long press the
power button, and release
it when it shows "
display.

Function Instruction

Reset Double tap

Single tap

" on

www.feiyu-tech.com 12

3.2.3 Turntable Operation

Function Button

Operation

1.Control the movements

Turntable

3.2.4 Capturing/Recording Button Operation

After QING connecting control cable with camera，Remote Control can directly
control picture-taking , video recording, follow focus.

Function Button

Operation

on pan axis

2. Adjust the parameter Rotate the turntable

Function Instruction

Rotate the turntable

Function Instruction

Capturing/Recording
button(2-stage way,
half-way press and
fully press)

1. Focus

2. Photo shooting (Fully press condition) Single tap

3. Video recording Long press for 3 seconds

( Half-way press condition)Single
tap

www.feiyu-tech.com 1312

3.2.5 Knob Operation

Function Button

Operation

1. Control the
movements on tilt axis

Knob

2. Select the setting

3.2.6 Function Button Operation

Function Button

Operation

Switch sensitivity: fast/low Single tap

Function Button

*select electronic follow focus, electronic zoom, AKFⅡ in control object setting in
the second screen. After selecting, it can be switched to control in home page.

Switch control object: tilt axis/optional
object*

Function Instruction

Rotate clockwise or anti­clockwise

Rotate clockwise or anti­clockwise

Function Instruction

Double tap

www.feiyu-tech.com 14

3.2.7 Power Button Operation

Function Button

Operation

Function Instruction

Power on/o󽗈 Long press and release

Power Button

Customize initial position* Double tap

NOTE :
The battery should be installed before using.

The default angle for tilt and pan axis is 0°, user can customize the initial position
by rotate the turntable and knob. (To reset to default angle please rotate the
turntable and knob to the position the image shows below and double tap the

Power button).

www.feiyu-tech.com 1514

3.3 Remote Control Touch Screen

3.3.1 Touch Screen

Display

icon

Mode / Status Display icon Mode / Status

Gimbal Connected

Gimbal Disconnected

Battery Level of Remote

Control

USB Camera Connected

USB Camera Disconnected

Lock Status High Sensitivity

Unlocked Status Low Sensitivity

Battery Level

Control-Follow Focus Control-Gimbal Tilt Axis

Control-Zoom In/Out

MODE

HF

LK

Tilt

Pan

Current Mode

Pan Mode

Lock Mode

Tilt Axis

Pan Axis

Control-Brushless

Follow Focus

www.feiyu-tech.com 16

3.3.2 Display Screen Switching

Switch screen by sliding left and right.

3.3.3 Touch Screen Common Gesture Operation

Slide to left: Switch to left screen
Slide to right: Switch to right screen/back to previous page
Click: Check this option

3.3.4 Lock and Unlock

3.4 Modes Setting

Slide right to left

Slide left to right

Tap to select current menu

3.4.1 Time-lapse Photography Mode

(1) Slide to right to enter reverse screen, click to enter the time-lapse
photography interface, the interface has three options (time setting, path setting,
last con󽗉guration).

www.feiyu-tech.com 1716

(2) For the first time, please set up all the time parameters at Time Set menu,
including movements time on pan, tilt axis, interval time and stop time for long
exposure of photography.

(3) Enter Rotate Set menu, use the knob and the turntable to control the path of
lens, record start and end points of path.

(4) Click Start to go to auto timelapse photography, the gimbal will show up
remaining time , current and total number of photos. Please wait for completion
by itself.

3.4.2 Fast Rotation Mode

(1) Slide to right to enter reverse screen, tag to enter the automatic rotation
mode.

(2) Adjust by the turntable:
① select the gear position of speed (There are 30 gears from 1 to30, the gear
position is indicated by "X", the higher the gear speed is, the faster the speed
② Set interval time/stop time (How often to take a photo and how long to
exposure for each photo).

www.feiyu-tech.com 18

(3) Tag direction icon or , to start to rotate, tag again to stop.
Once got settings set up, simply tag the trigger button to re-control the pan/tilt
via turntable and knob.

3.4.3 Wide Angle

Slide to right to enter reverse screen, tag to enter the Wide Angle interface, as the
picture shows:

Once setting done, simply tag the trigger button to re-control the pan/tilt via
turntable and knob.

3.4.4 Pan Shoot

Slide to right to enter reverse screen, tag to enter the pan shoot interface, and
have 180° panorama and 360° panorama. Tag to enter, set the number of photos
and seconds to stay, tag "Start". As the picture shows:

Once setting done, simply tag the trigger button to re-control the pan/tilt via
turntable and knob.

www.feiyu-tech.com 1918

3.4.5 Sensitivity Setting

Once setting done, simply tag the trigger button to re-control the pan/tilt via
turntable and knob.

3.4.6 Control Object Setting

Use the touch screen to switch.
Refer to P15 3.2.6.

Control the gimbal Zoom Follow focus Control the non-brush follow focus

3.4.7 Motor Power Setting

Scroll the left knob to select auto/customize, and scroll the turntable under the
display to adjust the custom force.

After setting, just click the trigger button to make the knob and turntable control
the gimbal again.

www.feiyu-tech.com 20

3.4.8 Gimbal Calibration Setting

3.4.9 Remote Matching Settings

3.4.10 Language Settings

3.4.11 About the Gimbal

Introduction about the 󽗉rmware version of the device.

3.5 Gimbal Initialization

You can initialize your gimbal when:
a. When camera is not level.
b. If not use for a long period of time.
c. In case of extreme temperature variations.

www.feiyu-tech.com 2120

Gimbal calibration step:

(1) put the gimbal on the horizontal table.
(2) Select "gimbal calibration" on the remote control (see P21 3.4.8). During the
calibration, the tilt will sag gently.
(3) After the calibration is successful, the gimbal will be gently raised to the
horizontal state.

4. Accessories

4.1 Brushless Follow Focus (AKF II)

① Fix the lens gear to the camera's focus ring position.
② Fasten the fixed bracket to the quick release plate of the gimbal with a
hexagonal screw, and insert the aluminum tube (if the lens holder is attached to
the gimbal, remove it).
③ Insert the follower into the aluminum tube, move the aluminum tube to adjust
the front and rear position so as to make the follower gear and the lens gear
engage, and lock the 󽗉xed thumb screw on the 󽗉xed bracket.
④ Connect the USB cable to the USB port as the picture shown, the installation
is completed.

For more instructions, please check AKF2 AK series brushless follow focus
manual.

www.feiyu-tech.com 22

4.2 Wireless MIC Kit

The receiver transmitter can collect the sound from the transmitter within 20m
range.

4.2.1 How to Use

(1)

Manually set video mode on camera.

(2) Plug in the wireless microphone (receiver terminal) to camera MIC jack. Turn it on.

(3) Turn on the wireless microphone (transmitter terminal), it is available to use.
(To get a better effectiveness, please wear it as close to the sound source as
possible.)

www.feiyu-tech.com 2322

(4) Plug the wireless clip-on microphone in the wireless microphone ( transmitter
terminal) mount.

4.2.2 Wireless microphone kit is available to use individually.

4.2.3 The indicator description of wireless microphone kit
* Workable for both receiver and transmitter terminal.

Status Indicator ICON

Power ON Blue light stays on to 󽗊ashes regularly

Power OFF Red light stays on to o󽗈

Low battery Red light 󽗊ashes regularly

Fully charged Green light stays on

Connected Blue light 󽗊ashes regularly

www.feiyu-tech.com 24

5. Speci󽗉cations

Product Dimensions 134mm×157mm×133mm

Max. Tilting Range 120°

Max. Panning Range 360°

Tilting Speed 8°/s ~ 140°/s

Panning Speed 12°/s ~ 165°/s

Theoretical Battery Life
for Gimbal

Weight

Payload Adapted cameras 3500g ( After Balancing )

5.5h

Gimbal 1340g ( Including Battery )
Remote Control 316g ( Including Battery )

www.feiyu-tech.com 2524

Compatible Cameras for Reference

QING Lens Compatible List

Brand Can be equipped with a lens

Brand

Camera(H/W/D） Model

Sony A7R3

126.9×95.6×62.7mm 572g
Sony A7M3

126.9×95.6×73.7mm 565g
Sony A9

126.9×95.6×63mm 588g
Sony A7S2

126.9×95.7×60.3mm 584g
Sony A7R2

126.9×95.7×60.3mm 582g
Sony A7M2

126.9×95.7×59.7mm 556g

Sony

Sony A6400
120×67×60mm 359g
Sony A6300
120×66.9×48.8mm 361g
Sony A6500
120×66.9×53.3mm 410g

GH5S

138.5×98.1×87.4mm 660g
GH5

138.5×98.1×87.4mm 725g
GX9

136.9×97.3×91.6mm 658g
GH4

93.4×83.9×132.9mm 560g

Z6 775g

Nikon

Z7 775g
D7500 720g

E 10–18mm F4 OSS Φ70mm×63.5mm 225g
FE 12-24mm F4 G Φ87mm×117mm 565g
FE 16-35mm F2.8 GM Φ89mm×122mm 680g
FE16-35mm f/4 ZA OSS Φ78mm×99mm 518g
Vario-Tessar FE 24-70mm F4 ZA OSS Φ73mm×94.5mm 426g
FE 24-70 F2.8 GM Φ87.6mm×136mm 886g
Zeiss E 16-70 F4 OSS Φ66.6mm×75mm 308g
E PZ 18–105mm F4 G OSS Φ78mm×110mm 427g
E PZ 18–200mm F3.5–6.3 OSS LE

(SEL18200LE）
FE 28mm F2 Φ64mm×60mm 200g
Zeiss FE 35mm F2.8 ZA Φ61.5mm×36.5mm 120g
Sigma 30mm f/1.4 DC DN Φ64.8mm×73.3mm 265g
Sigma 35mm f1.4 DG HSM Art Φ77mm×94mm 665g
FE 55mm F1.8 Φ64mm×71mm 281g
FE 50mm F2.8 MACRO Φ71mm×71mm 236g
FE 4/24-105 G OSS Φ83.4mm×113.3 mm 663g
FE 28-70mm f/3.5-5.6 OSS Φ72.5mm×83mm 295g
FE 85mm F1.4 GM Φ89.5mm×107.5mm 820g
E 10–18mm F4 OSS Φ70mm×63.5mm 225g
FE 12-24mm F4 G Φ87mm×117mm 565g
FE 16-35mm F2.8 GM Φ89mm×122mm 680g
FE16-35mm f/4 ZA OSS Φ78mm×99mm 518g
Vario-Tessar FE 24-70mm F4 ZA OSS Φ73mm×94.5mm 426g
FE 24-70 F2.8 GM Φ87.6mm×136mm 886g
Zeiss E 16-70 F4 OSS Φ66.6mm×75mm 308g
E PZ 18–105mm F4 G OSS Φ78mm×110mm 427g
E PZ 18–200mm F3.5–6.3 OSS LE

(SEL18200LE）
FE 28mm F2 Φ64mm×60mm 200g
Zeiss FE 35mm F2.8 ZA Φ61.5mm×36.5mm 120g
Sigma 30mm f/1.4 DC DN Φ64.8mm×73.3mm 265g
Sigma 35mm f1.4 DG HSM Art Φ77mm×94mm 665g
FE 55mm F1.8 Φ64mm×71mm 281g
FE 50mm F2.8 MACRO Φ71mm×71mm 236g
FE 4/24-105 G OSS Φ83.4mm×113.3 mm 663g
E 3.5-5.6/PZ 16-50 OSS Φ64.7mm×29.9mm 116g
FE 28-70mm f/3.5-5.6 OSS Φ72.5mm×83mm 295g
FE 85mm F1.4 GM Φ89.5mm×107.5mm 820g
Panasonic 24-105mm F4 L 680g
Panasonic 50mm F1.4 L-Mount

S-X50GK
LEICA DG Vario-Elmarit 12-60 f/2.8-4

Power OIS
Panasonic 24-70mm F2.8 L-Mount

S-E2470GK
Panasonic 70-200mm F4 Φ83mm×179mm 985g
Lumix 35-100mm F2.8 Ⅱ φ67mm×99mm 357g
LUMIX G 14-140mm f/4-5.8 OIS Φ70mm×84mm 460g
AF-S 24-120mm f/4G ED VR 710g
18-140mm f/3.5-5.6G ED VR Φ78mm×97mm 490g
NIKKOR Z 50mm f/1.8 S 415g
NIKKOR Z 24-70mm f/4 S 500g

NIKKOR 70-300mm f/4.5-6.3G ED VR 415g
NIKKOR 70-200mm f/2.8E FL ED VR 1.43KG

Lens size & weight

(Φ×L）

Φ68mm×97.1mm 460g

Φ68mm×97.1mm 460g

Φ90mm×130mm 955g

Φ68mm×86mm 320g

φ90.9mm×140mm 935g

Camera

√ √

√ √

√ √

√ ×

√ √

√ ×

√ √

√ √

√ ×

√ √

√ √

√ √

√ √

√ √

√ √

√ √

√ √

√ √

√ √

√ √

√ √

√ √

√ √

√ √

√ √

√ √

√ √

√ √

√ √

√ √

√ √

√ √

√ √

√ √

√ ×

√ √

√ √

√ √

√ √

√ √

√ √

√ √

√ ×

√ √

√ √

√ √

√ √

√ √

√ √

√ √

Brushless follow

focus + Camera

Remark

www.feiyu-tech.com 26

QING Lens Compatible List

Brand Can be equipped with a lens

Brand

Camera(H/W/D） Model

EOS R

佳能

EOS RP

5D MarkIV
5D MarkIII
6D MarkII

佳能

6D
80D
EOSR

EF-S 18-200mm f/3.5-5.6 IS Φ78.6mm×102mm 595g
EF 24-70mm f/4L IS USM Φ83.4mm×93mm 600g
EF 50mm f/1.4 DG HSM Art Φ85mm×100mm 815g
RF 28-70mm F2L USM Φ103.8mm×139.8mm 1430g
RF 24-105mm F4L IS USM Φ83.5mm×107.3mm 670g
EF 70-200mm f/2.8L IS III USM 1.48KG
EF 70-300mm f/4-5.6 IS II USM 1.05KG
EF-S 18-200mm f/3.5-5.6 IS 595g
EF 24-70mm f/4L IS USM 600g
EF 24-70mm f/2.8L IS USM 805g
EF 24-105mm f/3.5-5.6L IS USM 525g
EF 24-105mm f/4L IS USM 795KG
EF 16-35mm f/2.8L IS USM 1.1KG
EF 200mm f/2.8L II USM 1.1KG

Lens size & weight

(Φ×L）

Tips: The camera needs to be close to the tilt motor.

Camera

√ √

√ √

√ √

√ √

√ √

√ ×

√ ×

√ √

√ √

√ √

√ √

√ √

√ √

√ ×

Brushless follow

focus + Camera

Remark

www.feiyu-tech.com 2726

Disclaimer

Thanks for using FeiyuTech product. The information in this document affects
your safety and your legal rights and responsibilities. Read the entire document
carefully to ensure proper configuration before use, Failure to read and follow
instructions and warnings in this document may result in serious injury to
yourself or others, or damage to your products or damage to other objects in the
vicinity.

By using this product, you hereby signify that you have read this disclaimer and
warning carefully and that you understand and agree to abide by the terms
and conditions herein. You agree that you are solely responsible for your own
conduct while using this product, and for any consequences thereof. You agree
to use this product only for purposes that are proper and in accordance with all
applicable laws, rules, and regulations, and all terms, precautions, practices,
policies and guideline FeiyuTech has made and may make available. FeiyuTech
accepts no liability for damage, injury or any legal responsibility incurred directly
or indirectly from the use of product.

FeiyuTech will not provide any service for any product obtained from abnormal
channels.

Notice

1. Make sure motor spinning is not blocked by external force when the product is
power on.

2. DO NOT contact the product with water or other liquid if the product is not
mark waterproof or splash-proof. Waterproof and splash-proof product. DO NOT
contact sea water or other corrosive liquid.

3. DO NOT disassemble the product except is detachable available. It need send
to FeiyuTech after-sales or authorized service center to fix it if you accidently
disassemble it and cause abnormal work. The relevant costs are borne by user.

4. Prolonged continuous operation may cause the product surface temperature
to rise, please operate carefully.

Storage and Maintenance

1. Keep the product or removable batteries or accessories out of the reach of
children and pets.

2. DO NOT leave the product or removable batteries or accessories near heat
sources such as a furnace or heater.
DO NOT leave the product or removable batteries or accessories inside of a
vehicle on hot days.

www.feiyu-tech.com 28

3. Please storage the battery in dry environment.

4. DO NOT overcharge or overuse the battery, otherwise it will cause damage to
the battery core.

5. Never use the product when the temperature is too high or too low.

6. For the product with removable batteries, please take out batteries if you don't
use it for a long time.

Battery Safety Guidelines

1. To avoid 󽗉re, serious injury, and property damage, observe the following safety
guidelines when using, charging or storing the battery.

(1)DO NOT allow the battery to come into contact with any kind of liquid. DO NOT
leave the battery out in the rain or near a source of moisture. DO NOT drop the
battery into water.
(2)If the battery falls into water by accident, put it in a safe and open area
immediately. Maintain a safe distance from the battery from the battery until it is
completely dry. Never use the battery again.
(3)If batteries catch 󽗉re, use water, water mister, sand, 󽗉re blanket, dry powder,
carbon dioxide fire extinguisher to extinguish the fire immediately. It is prone
to explosion after a large fire. Please choose the fire extinguishing method
according to above recommended order according to the actual situation.
(4)DO NOT use or charge swollen, leaky or damage battery.
(5)DO NOT disassemble or pierce the batteries in any way or the battery may leak.
(6)DO NOT drop or strike batteries. DO NOT place heavy objects on the battery or
charger.
(7)DO NOT use the battery if it falls.
(8)DO NOT heat batteries.
(9)DO NOT use the batteries in strong electrostatic or electromagnetic
environments. Otherwise, the battery may occur short circuit.
(10)Electrolytes in the battery are highly corrosive. If any electrolytes make
contact with your skin or eyes, immediately wash the affected area with fresh
running water for at least 15 minutes, and then see a doctor immediately.
(11)Please use official batteries are provided by FeiyuTech. If you need replace
the battery, please purchase at FeiyuTech o󽗋cial website or authorized dealer.
FeiyuTech will not be responsible for the battery accident and devices malfunction
cause by batteries use from uno󽗋cial provided.

2. DO NOT drop or strike batteries. If the battery is abnormal, contact Feiyu After­sales support.

www.feiyu-tech.com 2928

www.feiyu-tech.com 30