Video | DINION IP 5000 MP
DINION IP 5000 MP
www.boschsecurity.com
The 5MP indoor camera is a ready-to-use, complete network video surveillance system inside a compact and stylish housing. This camera brings Bosch’s highperformance technology into the realm of homes, small office and retail businesses by offering a costeffective solution for a broad range of applications.
System overview
The elegant, compact box design is ideal for homes, offices, businesses or shops where camera size and appearance is important. The camera has a 1/3-inch CMOS sensor and is a true day/night camera offering excellent performance day or night.
Functions
Content Based Imaging Technology
Content Based Imaging Technology (CBIT) is used to radically improve image quality in all lighting conditions and to identify areas for enhanced processing. The camera examines the scene using intelligent video analytics and provides feedback to retune the image processing. This provides better detail in the areas that matter and better all-round performance.
uStylish indoor network camera
u5MP for highly detailed images
uIntelligent noise reduction reduces bandwidth and storage requirements by up to 50%
uSD card slot for local recording
uFTP, Dropbox and e-mail alarms
Intelligent Dynamic Noise Reduction reduces bandwidth and storage requirements
The camera uses Intelligent Dynamic Noise Reduction which actively analyzes the contents of a scene and reduces noise artifacts accordingly.
The low-noise image and the efficient H.264 compression technology provide clear images while reducing bandwidth and storage by up to 50% compared to other H.264 cameras. This results in reduced-bandwidth streams that still retain a high image quality and smooth motion. The camera provides the most usable image possible by cleverly optimizing the detail-to-bandwidth ratio.
The average typical optimized bitrate in kbits/s for various frame rates is shown in the table:
fps |
5MP |
480p |
12 |
1753 |
438 |
|
|
|
5 |
1136 |
284 |
|
|
|
2 |
489 |
122 |
|
|
|
Multiple streams
The innovative multi-streaming feature delivers various H.264 streams together with an M JPEG stream. These streams facilitate bandwidth-efficient viewing and recording as well as integration with third-party video management systems.
2 | DINION IP 5000 MP
Depending on the resolution and frame rate selected for the first stream, the second stream provides a copy of the first stream or a lower resolution stream.
The third stream uses the I-frames of the first stream for recording; the fourth stream shows a JPEG image at a maximum of 10 Mbit/s.
Simultaneous analog and IP video outputs
A surge-protected analog video output ensures that high resolution IP video streaming and an analog video output are available simultaneously. This means, for example, that a confrontation monitor can easily be connected directly to the camera while still maintaining full IP functionality.
Regions of interest and E-PTZ
Regions of Interest (ROI) can be user defined. The remote E-PTZ (Electronic Pan, Tilt and Zoom) controls allow you to select specific areas of the parent image. These regions produce separate streams for remote viewing and recording. These streams, together with the main stream, allow the operator to separately monitor the most interesting part of a scene while still retaining situational awareness.
Built-in microphone, two-way audio and audio alarm
The camera has a built-in microphone to allow operators to listen in on the monitored area. Two-way audio allows the operator to communicate with visitors or intruders via an external audio line input and output. Audio detection can be used to generate an alarm if needed.
Tamper and motion detection
A wide range of configuration options is available for alarms signaling camera tampering. A built-in algorithm for detecting movement in the video can also be used for alarm signaling.
Edge recording
The SD card slot supports up to 2 TB of storage capacity. An SD card can be used for local alarm recording. Pre-alarm recording in RAM reduces recording bandwidth on the network, or — if SD card recording is used — extends the effective life of the storage medium.
Storage management
Recording management can be controlled by the Bosch Video Recording Manager (VRM) or the camera can use iSCSI targets directly without any recording software.
Cloud-based services
The camera supports time-based or alarm-based JPEG posting to four different accounts. These accounts can address FTP servers or cloud-based storage facilities (for example, Dropbox). Video clips or JPEG images can also be exported to these accounts.
Alarms can be set up to trigger an e-mail or SMS notification so you are always aware of abnormal events.
Easy installation
Power for the camera can be supplied via a Power- over-Ethernet compliant network cable connection. With this configuration, only a single cable connection is required to view, power, and control the camera. Using PoE makes installation easier and more costeffective, as cameras do not require a local power source.
The camera can also be supplied with power from +12 VDC power supplies. To increase system reliability, the camera can be simultaneously connected to both PoE and +12 VDC supplies.
Additionally, uninterruptible power supplies (UPS) can be used to ensure continuous operation, even during a power failure.
For trouble-free network cabling, the camera supports Auto-MDIX which allows the use of straight or crossover cables.
Simple set-up
The camera has a very intuitive user interface that allows fast and easy configuration. Configurable scene modes are provided with the best settings for a variety of applications:
•Indoor – general day-to-night changes in an indoor environment without sun highlights or street lighting effects.
•Outdoor – general day-to-night changes in an outdoor environment with sun highlights and street lighting effects.
•Traffic – for monitoring traffic movement on roads or parking lots. It can also be used in industrial applications where fast moving objects are to be monitored. Motion artifacts are minimized.
•Night-optimized – optimized for details in low light environments.
•BLC – optimized for scenes with people moving in front of a bright background.
•Vibrant – enhanced contrast, sharpness and saturation.
True day/night switching
The camera incorporates mechanical filter technology for vivid daytime color and exceptional night-time imaging while maintaining sharp focus under all lighting conditions.
Access security
Password protection with three levels and 802.1x authentication is supported. To secure Web browser access, use HTTPS with a SSL certificate stored in the camera. The video and audio communication channels can be independently AES encrypted with 128-bit keys by installing the optional encryption site license.
Complete viewing software
There are many ways to access the camera’s features: using a web browser, with the Bosch Video Management System, with the free-of-charge
Bosch Video Client, with the video security mobile app, or via third-party software.
Loading...