DINION 4000 AN
Video | DINION 4000 AN
DINION 4000 AN
www.boschsecurity.com
TVL
960H
u Ultra high resolution 960H (1/3“) sensor
u Digital extended dynamic range
u Digital noise reduction
u Easy to install
u True day/night version
DINION 4000 cameras are compact analog cameras
that offer excellent resolution in variable lighting
conditions, day or night. The high performance 960H
1/3‑inch CCD sensor provides a resolution of 720TVL.
The cameras are an ideal solution for demanding
scene conditions. The backlight compensation and
highlight compensation features optimize the image
visibility in high-contrast areas, automatically
compensating for bright backgrounds and strong light
sources.
The cameras are easy to install and parameters can be
set individually. Privacy zones and motion detection
functions can be set up in the handy camera menu
system.
The true day/night version automatically switches from
color to monochrome using a mechanical IR filter
depending on the available light.
System overview
The camera is supplied ready to operate – simply
attach the lens, connect video and then power. For
especially challenging situations where fine tuning or
special settings are required, the camera parameters
can be individually set using the control buttons on the
side of the camera and an On-Screen Display (OSD).
Functions
Day/Night mode
The true day/night version provides enhanced night
viewing. The mechanical IR filter can switch from color
to monochrome automatically by either sensing the
illumination level or via the alarm input. The filter can
be switched manually via the alarm input or through
the camera.
Ideal picture performance
There are many settings available to help fine-tune the
picture performance to match your installation
environment. These include:
• BLC – automatically and dynamically compensates for
strong backlight
• HLC – reduces glare from highlight areas
• Digital dynamic range – extends dynamic range of
visible areas
• Contrast and sharpness – enhance details in bright or
misty scenes
• Dynamic noise reduction – dynamically reduces noise
in the picture
Privacy masking
Eight different privacy zones allow specific parts of a
scene to be blocked. Pre-program any part of the
scene to be masked.
Video Motion Detection
The built-in video motion detector allows you to select
four programmable areas with sensitivity thresholds.
When motion is detected, alarms can be displayed in
the video signal (the true day/night version can close
the output relay).
Typical applications:
• Museums and art galleries
• Shopping centers
• Offices
• Schools, colleges and universities
• Petrol/gas stations
Certifications and approvals
Standards
Safety
(low voltage
versions)
EN 60950-1
UL 60950-1 (2nd edition)
CSA C22.2 No. 60950-1-07 (2nd edition)
Safety
(high voltage
versions)
EN 60950-1
C-Tick
Emission EN 55022 class B, FCC part 15 class B,
EN61000-3-2, EN61000-3-3
Immunity EN 50130-4, EN 50121-4
Vibration Camera with 500 g (1.1 lbs) lens according to
IEC 60068-2-6
Region Certification
Europe CE
CE High Voltage
USA UL
FCC
Canada CSA
Technical specifications
Image Sensor 960H, 1/3" CCD, sensor
resolution 720TVL
System PAL or NTSC
Total pixels (H x V) 1020 x 596 (PAL)
1020 x 508 (NTSC)
Effective pixels (H x V) 976 x 582 (PAL)
976 x 494 (NTSC)
Video Output Composite: 1 Vpp, 75 Ohm
Sync. System Internal sync., Line-lock
S/N Ratio (sharpness, AGC off) 52 dB min.
Minimum Illumination (F1.2,
50IRE)
Color: 0.1 lx
B/W: 0.02 lx (true D/N version)
Minimum Illumination (F1.2,
30IRE)
Color: 0.05 lx
B/W: 0.01 lx (true D/N version)
Manual shutter 1/50 – 1/10,000 (PAL)
1/60 – 1/10,000 (NTSC)
Digital Noise reduction 2DNR
White Balance ATW, Push, User1, User2, Anti
CR, Manual, Push lock
Light compensation OFF/BLC/HLC
Digital Dynamic Engine On, Off
AGC On, Off
Day/Night Auto, Color, B/W
Burst On, Off
Motion detection 4 programmable zones
Privacy 8 programmable zones (4 zones
when motion detection is on)
Mirror On (horizontal), Off
Sharpness 0 ‑ 255
Alarm input
(true D/N version only)
Night mode active profile
switching, 3.3 V nominal,
+40 VDC max.
Alarm output
(true D/N version only)
Night mode active, 30 VAC or
+40 VDC, max. 0.5 A continuous,
10 VA
OSD language English, Japanese, German,
French, Russian, Portuguese,
Spanish, Simplified Chinese
Lens type Manual, DC Iris
DC Iris drive: 50 mA max.
Lens mount CS (max. lens protrusion 5 mm
[0.2 in])
C-mount compatible with optional
adapter ring
Tripod mount Bottom (isolated) and top 1/4-
inch 20 UNC
Supply Voltage
(VBx-4075-C11, VBx-4075-C21)
12 VDC / 24 VAC
Supply Voltage
(VBx-4075-C51)
230 VAC
Power Consumption (true D/N
version)
3.6 W max. / 0.3 A
Power Consumption (electronic
D/N version)
2.4 W max. / 0.2 A
Dimensions (without lens) 58 x 66 x 122 mm
2.28 x 2.6 x 4.8 in
Weight (12 VDC/24 VAC) 500 g (1.10 lbs) without lens
Weight (230 VAC) 600 g (1.32 lbs) without lens
2 | DINION 4000 AN
Loading...