Radio / Cassette
Montreal
RCM 45
Operating instructions
1 |
2 |
3 |
4 |
5 |
6 |
7 |
8 |
9 |
10 |
11 |
12 |
13 |
14 |
20 |
19 |
18 |
17 |
16 |
|
|
|
|
|
ENGLISH |
|
|
|
|
|
FRANÇAIS |
|
|
|
|
|
ITALIANO |
15 |
|
|
|
NEDERLANDS |
|
|
|
|
|
|
|
|
SVENSKA |
|
|
|
|
|
ESPAÑOL |
|
|
|
|
|
PORTUGUÊS |
|
|
3
Contents |
|
Short instructions ........................ |
19 |
Important notes ............................ |
22 |
Precautions ........................................... |
22 |
Traffic safety ......................................... |
22 |
Installation/Connection .......................... |
22 |
Anti-theft protection ..................... |
23 |
Release panel ....................................... |
23 |
Detaching the release panel ................. |
23 |
Fitting the release panel .................... |
23 |
Security code ..................................... |
23 |
Entry of a wrong code number .............. |
23 |
Switching on security coding ................. |
23 |
Re-start following an interrup-tion of the |
|
power supply ......................................... |
24 |
Switching off security coding ................. |
24 |
Optical indication for extra security ....... |
24 |
Radio operation with RDS ........... |
25 |
AF - Alternative frequency .................... |
25 |
REG - regional programme ................... |
25 |
Selecting a waveband ........................... |
25 |
Automatic tuning ................................ |
25 |
Manual tuning .................................... |
26 |
Scrolling through the broadcasting |
|
network (only FM) ................................. |
26 |
Changing the memory bank (FM) ......... |
26 |
Storing stations ..................................... |
26 |
Automatically storing the strongest |
|
stations with Travelstore ....................... |
27 |
Recalling stored stations ....................... |
27 |
Scanning stored stations |
|
with Preset Scan ................................... |
27 |
Sampling all stations to be received |
|
with Scan .............................................. |
27 |
Selecting the seek tuning sensitivity ..... |
27 |
Switching from stereo to mono (FM) ..... |
28 |
Receiving traffic programme |
|
stations with RDS-EON ................ |
28 |
Traffic announcement priority on/off ..... |
28 |
Warning beep ........................................ |
28 |
Switching the warning beep off .......... |
28 |
Automatic seek tuning start ................... |
29 |
Adjusting the volume for traffic an- |
|
nouncements and the warning beep ..... |
29 |
Tape operation .............................. |
29 |
Inserting a tape ..................................... |
29 |
Removing a tape ................................... |
29 |
PROG selector ...................................... |
29 |
Fast Forward/Rewind ............................ |
29 |
Tape equalisation with MTL .................. |
30 |
Switching the audio source |
|
with SRC (Source) ................................ |
30 |
DSC programming ........................ |
30 |
Overview of the DSC factory settings ... |
31 |
CD changer control (optional) ..... |
32 |
Switching to changer operation |
|
with SRC on the car radio ..................... |
32 |
Selecting a track using the rocker |
|
switch / selecting a disc ........................ |
32 |
SCAN .................................................... |
32 |
MIX ........................................................ |
32 |
Appendix ....................................... |
33 |
Care notes ............................................ |
33 |
Release panel .................................... |
33 |
Mechanism/cassette tapes ................ |
33 |
Specifications ........................................ |
33 |
18
Short instructions
1On Off Volume
This unit can also be switched on and off with the Release Panel C.
Also, when being connected correctly, you may turn the radio on and off via the ignition of your car.
Use one of the following possibilities to continue operating the set when the ignition is switched off:
a)Switch on/off with knob 1.
b)Remove/re-install the release panel.
c)Press AUD 3.
When turning on the unit with the release panel or by pressing the AUD button, the system will start to play with the volume adjusted last.
When operating the unit with the ignition being switched off, the system will automatically shut down after one hour in order to avoid that the battery goes flat.
2LD
Loudness - When listening at a low level, the Loudness function creates a more natural sound by boosting the low frequency range.
To switch the Loudness on/off: Press LD.
For more information, read chapter “DSC programming”.
3AUD/GEO
AUD –
To adjust the treble and bass frequencies with the rocker switch.
Treble +
Treble –
Bass –
Bass +
GEO – |
|
DEUTSCH |
|
|
|
||
To adjust the balance (left/right) and |
|
|
|
fader (front/rear) with the rocker switch. |
|
|
|
|
ENGLISH |
||
|
|
||
|
|
|
|
|
|
|
|
Fader front |
FRANÇAIS |
||
|
|||
Fader rear |
|
||
Balance left |
|
||
Balance right |
|
||
ITALIANO |
|||
To alter a setting, |
|||
|
|||
• press AUD or GEO and then chan- |
|
||
ge the value with the rocker switch. |
|
||
|
|||
NEDERLANDS |
|||
The adjusted value is indicated in the |
|||
|
|||
display. |
|
||
The last setting will be stored automati- |
|
||
cally. |
|
||
|
|||
To finish the setting: Press AUD or |
SVENSKA |
||
GEO. |
|||
|
|||
If the setting remains unchanged within |
|
||
8 seconds, the display will switch back |
|
||
to the previous condition. |
|
||
ESPAÑOL |
|||
|
|
||
|
|
|
|
|
|
|
|
|
|
PORTUGUÊS |
|
|
|
|
19
4DSC (Direct Software Control) Use the DSC function to customise
certain programmable, basic settings to suit your personal needs and preferences. See chapter “DSC programming” for more information.
5AF - Alternative frequency during RDS operation
When “AF” lights up in the display, the radio will automatically search for a frequency offering better reception of the same RDS programme.
To switch AF on/off: Press AF briefly.
If lo does not light up, the radio will also pick up weaker, distant stations (high sensitivity).
To switch over: Press lo briefly. For more information, see chapter “DSC programming”.
7MTL
Press when using metal or CrO2 tapes. “...--MTL” lights up in the display.
Extra function:
REG ON / REG OFF - With REG ON the system will only switch to a better alternative frequency if the latter belongs to a linked station offering the same regional programme (see “REG - regional programme).
To switch REG on or off: Press AF until “REG ON” or “REG OFF” appears in the display (BEEP tone).
6lo
To alter the automatic seek tuning sensitivity.
If lo is displayed, the radio will only pick up strong, local stations (low sensitivity).
To switch the function on or off:
Press the MTL button during tape operation until the desired condition is displayed.
8MIX
Changer operation (optional)
See chapter “CD changer control”.
9Cassette removal
Press .
:Cassette loading slot
Insert tape (side A or 1 up; the open side facing to the right).
;Display
Radio operation:
NDR1 NDS - Station abbreviation or frequency
FM |
- Waveband |
T |
- Memory bank (I, II, T) |
5 |
- Preset button (1 - 6) |
|
- Stereo |
lo |
- Seek tuning sensitivity |
AF |
- Alternative RDS frequency |
TP |
- Traffic programme identifier |
TA |
- Priority for traffic programme |
|
stations |
LD |
- Loudness |
Tape operation:
TR1--PLAY - Side 1 (or 2)
MTL - Metal
CD changer operation (optional):
CD 05 - Disc number
T 02 - Title number
20
<PROG button / Fast winding
To switch to the other side of the cassette tape:
Press both buttons simultaneously.
The display shows TR1--... or TR2--...
FR : Fast rewind; stop by pressing FF.
FF : Fast forward; stop by pressing FR.
=SC
Radio operation
Scan (sampling all stations to be received): Press SC briefly.
Preset Scan (sampling all stations stored on the preset buttons): Press SC for approximately 2 seconds.
Changer operation (optional)
See chapter “CD changer control”.
>SRC (Source)
To switch between the available audio sources, e.g. tape, radio, CD changer (optional).
?1, 2, 3, 4, 5, 6 - preset buttons
You can store six stations on each FM memory bank (I, II, T).
To store a station: Press button during radio operation and hold down until the radio resumes play.
To recall a station: Select the waveband and on FM also the desired memory bank (press FMT button as many times as required). Then press the corresponding preset button briefly.
Extra function:
Coding: Read chapter “Anti-theft protection” first.
Buttons 1, 2, 3, 4 - To enter the fourdigit code.
Press each of the buttons as many times as required until the code number given in the car radio passport stands in the display.
@TA (priority for traffic announcements)
If “TA” is displayed, the system will play traffic stations only.
TA on/off: Press button.
AM•L
To select the MW or LW waveband. Press button as many times until the desired band is adjusted.
BFMT - FM, Travelstore
To switch between the FM memory banks I, II and “T” (Travelstore).
To switch over:
Press FMT as many times until the desired bank is indicated in the display. To store the six most powerful stations automatically with Travelstore:
Store: Press FMT; seek tuning starts. Recall: Press FMT as many times until the display shows “T”. Then briefly press one of the preset buttons 1, 2, 3, 4, 5, or 6.
CRELEASE / CODE-LED Release panel - detachable face.
For extra anti-theft protection, you should take the detachable face with you when leaving your car.
To remove it: Press RELEASE.
To re-install the panel: Insert on the left side first with the cassette slot facing up and then press on the right until the panel locks in.
Code LED
May flash for additional theft protection when the car radio is switched off, provided this feature has been adjusted correspondingly via DSC (see DSC CODE-LED).
DEUTSCH ENGLISH FRANÇAIS ITALIANO NEDERLANDS SVENSKA ESPAÑOL PORTUGUÊS
21