CI 3000 - Communication Interface Module. SW-Version OS4.11
o limited functional range
CI 3000 - Communication Interface Module
Siemens VDO Automotive
Address: Siemens VDO Trading GmbH
Compatibility List
Siemens VDO Automotive
Brand
Type
Navigation Computer
Hands-free Kits
Firmware (Mobile Phone)
Incoming Call
Outgoing Call
CLIP
Call Register
Download Phonebook SIM
Download Phonebook Mobile
Add Phonebook Entry
Delete Phonebook Entry
Volume Up/Dpwn Active Call
Volume up/down Ringing Tone
Read SMS
Write SMS
Incoming SMS advice
Edit SMS
Answer SMS
Call Back SMS
SW Download
Put Mobile Phone in cradle during active call
PC 5510, PC 5500,
PC 5400
Siemens HKC-500/540, CA 3030
10+++++++++-+++++++Siemens HKC-540, CA 3030
10+++++++++++++++++Siemens HKC-500/540, CA 3030
16+++++-+++++++++++20+++++++-+++++++++91+++++++++++++++++Siemens HKC-520, CA 3030
16++++++++--++++++
+
25+++++++++-++++++
+
THB UniSystem 8
11)
, CA 3031
+
13)+13)
-4)-4)+
2
Nokia Cark 126
3)
, CA 3032
+
13)+13)
-4)-4)+
2)
THB UniSystem 8
11)
, CA 3031
+
13)+13)
-4)-4)+
2)
Nokia Cark 126
3)
, CA 3032
+
6,13)+6,13)
-4)-4)+
2)
Nokia Cark 126
3)
, CA 3032
3.10
+
13,20)+13,20)
-++++
+
-4)-4)+
2)
+++++-+
THB UniSystem 8
11)
, CA 3031
+
13)+13)
-4)-4)+
2)
3.09
+
13)+13)
+++++
+
-4)-4)+
2)
+++++-+
+
13,20)+13,20)
-4)-4)o
2,24)
+
13)+13)
-4)-4)+
2)
+
13,20)+13,20)
-4)-4)o
2,24)
§ 2) The currently loaded list of SMSs is presented in Navigation,
§ 4) No volume control via Navigation remote control but only at
cradles, that support THB Media Display, are supported (see logo
§ 2) The currently loaded list of SMSs is presented in Navigation,
§ 4) No volume control via Navigation remote control but only at
§ 2) The currently loaded list of SMSs is presented in Navigation,
§ 2) The currently loaded list of SMSs is presented in Navigation,
§ 4) No volume control via Navigation remote control but only at
cradles, that support THB Media Display, are supported (see logo
§ 2) The currently loaded list of SMSs is presented in Navigation,
§ 4) No volume control via Navigation remote control but only at
cradles, that support THB Media Display, are supported (see logo
PC 5510, PC 5500,
PC 5400
§ Sometimes no telephone button appears after inserting the
Siemens HKC-670 + HKO-690,
PC 5510, PC 5500,
PC 5400
PC 5510, PC 5500,
PC 5400
Service & Special Solutions
Kruppstrasse 105, D-60388 Frankfurt/Main
C 55Siemens
Siemens
Siemens
SiemensS 55
Siemens
SiemensS 65
C 55
M 55
SL 55
PC 5510, PC 5500,
PC 5400
PC 5510, PC 5500,
PC 5400
CA 3030
+ Function supported
- Function not supported
o Function limited
Remarks
phone into the cradle or after SW-Download -> take out and reinsert the phone!
Nokia6310i MS 5500, MS 5400
Nokia6100
MS 5500, MS 5400
Nokia6610 MS 5500, MS 5400
Nokia6610i MS 5500, MS 5400
Nokia Cark 126 3), CA 3032
THB UniSystem 8
11)
, CA 3031
5.52
4.70
4.70
4.74
3.10
4.18
3.09
4.18
+ + o o + +
+ + + + + +
+ + + + + +
+ + + + + +
- + + + + +
+ + + + + +
+ + + + + +
+ + + + + +
+ + + + ++
+ + + + + - +
+ + + + ++
+ + + + + - +
+ + + + ++
+ + + + + - +
+ + + + ++
+ + + + ++
even if not yet completed.
the phone.
§ 11) Not working with some (old) THB cradles. Only THB
at the cradle backside).
§ 13) During Phonebook or SMS Download there may be a delay
of actions (End Call, Incoming Call advice, Accept/Decline Call).
Dialing sometimes not working at first attempt -> retry! DTMF
sometimes delayed.
even if not yet completed.
§ 3) No support of MC5400 with this car kit!
the phone.
§ 11) Not working with some (old) THB cradles. Only THB
at the cradle backside).
§ 13) During Phonebook or SMS Download there may be a delay
of actions (End Call, Incoming Call advice, Accept/Decline Call).
Dialing sometimes not working at first attempt -> retry! DTMF
sometimes delayed.
even if not yet completed.
§ 3) No support of MC5400 with this car kit!
the phone.
§ 6) During Phonebook Download: sometimes Dialing or DTMF
not working.
§ 13) During Phonebook or SMS Download there may be a delay
of actions (End Call, Incoming Call advice, Accept/Decline Call).
Dialing sometimes not working at first attempt -> retry! DTMF
sometimes delayed.
even if not yet completed.
§ 3) No support of MC5400 with this car kit!
the phone.
§ 11) Not working with some (old) THB cradles. Only THB
at the cradle backside).
§ 13) During Phonebook or SMS Download there may be a delay
of actions (End Call, Incoming Call advice, Accept/Decline Call).
Dialing sometimes not working at first attempt -> retry! DTMF
sometimes delayed.
§ 20) End call is sometimes delayed.
even if not yet completed.
§ 3) No support of MC5400 with this car kit!
07.07.05 Version 3.1 CI 3000 Software OS4.11Errors and omissions excepted. Subject to modifications.1 / 7
+ full functional range
Compatibility List
- not supported
CI 3000 - Communication Interface Module. SW-Version OS4.11
o limited functional range
CI 3000 - Communication Interface Module
Siemens VDO Automotive
Address: Siemens VDO Trading GmbH
Compatibility List
Siemens VDO Automotive
Brand
Type
Navigation Computer
Hands-free Kits
Firmware (Mobile Phone)
Incoming Call
Outgoing Call
CLIP
Call Register
Download Phonebook SIM
Download Phonebook Mobile
Add Phonebook Entry
Delete Phonebook Entry
Volume Up/Dpwn Active Call
Volume up/down Ringing Tone
Read SMS
Write SMS
Incoming SMS advice
Edit SMS
Answer SMS
Call Back SMS
SW Download
Put Mobile Phone in cradle during active call
THB UniSystem 8
11)
, CA 3031
+
13)+13)
-4)-4)+
2)
Nokia Cark 126
3)
, CA 3032
4.22
+
13)+13)
+++++
+
-4)-4)+
2)
+++++-+
THB UniSystem 8
11)
, CA 3031
+
13)+13)
-4)-4)+
2)
-4)-
4)
+
26)+26)
+
28)+28)
-4)-
4)
o
29)
-4)-
4)
+
26)+26)
-4)-
4)
+
25)
-4)-
4)
-
27)
+
25,26)+26)
-4)-
4)
THB UniSystem 8, CA 3031
R4E002
+
25,26)+26)
+++++
+
-4)-
4)
+++++++
+
26)+26)
-4)-
4)
+
26)o26,29)
-4)-
4)
o
17)o22)
15,30)
7,10,14)
7,10,14)o10,12,18)o14,19,21)o16)o9)o1)
§ 2) The currently loaded list of SMSs is presented in Navigation,
§ 4) No volume control via Navigation remote control but only at
cradles, that support THB Media Display, are supported (see logo
§ 4) No volume control via Navigation remote control but only at
cradles, that support THB Media Display, are supported (see logo
§ 2) The currently loaded list of SMSs is presented in Navigation,
§ 4) No volume control via Navigation remote control but only at
cradles, that support THB Media Display, are supported (see logo
§ 4) No volume control via Navigation remote control but only at
§ 4) No volume control via Navigation remote control but only at
§ 4) No volume control via Navigation remote control but only at
§ 4) No volume control via Navigation remote control but only at
§ 4) No volume control via Navigation remote control but only at
Service & Special Solutions
Kruppstrasse 105, D-60388 Frankfurt/Main
Nokia7210 MS 5500, MS 5400
5.63 not
supported
+ Function supported
- Function not supported
o Function limited
Remarks
the phone.
§ 11) Not working with some (old) THB cradles. Only THB
at the cradle backside).
§ 13) During Phonebook or SMS Download there may be a delay
o
of actions (End Call, Incoming Call advice, Accept/Decline Call).
Dialing sometimes not working at first attempt -> retry! DTMF
sometimes delayed.
§ 20) End call is sometimes delayed.
§ 24) Sometimes the SMS download may be incomplete.
Nokia7250 MS 5500, MS 5400
Nokia7250i MS 5500, MS 5400
Sony
Ericsson
Sony
Ericsson
Sony
Ericsson
MS 5500, MS 5400
T 68i
T 610 MS 5500, MS 5400
T 630 MS 5500, MS 5400
3.12
4.22
Sony Ericsson HCA-20, CA 3033R8A015++ + + + + + +
THB UniSystem 8, CA 3031R8A015
Sony Ericsson HCA-20, CA 3033R6C005++ + + + + + +
THB UniSystem 8, CA 3031R6C005
Sony Ericsson HCA-20, CA 3033R3A009
THB UniSystem 8, CA 3031R3A009
+ + + + + +
+ + + + + +
+ +
+ +
+ + + + + +
+ + + + + + +
+ + + + + +
+ + + + ++
+ + + + ++
+ + + + + ++
+ + - + + +
+ + + + + ++
+ + + + + ++
+ + + + + +
+ + + + + ++
even if not yet completed.
the phone.
§ 11) Not working with some (old) THB cradles. Only THB
at the cradle backside).
§ 13) During Phonebook or SMS Download there may be a delay
of actions (End Call, Incoming Call advice, Accept/Decline Call).
Dialing sometimes not working at first attempt -> retry! DTMF
sometimes delayed.
even if not yet completed.
§ 3) No support of MC5400 with this car kit!
the phone.
§ 11) Not working with some (old) THB cradles. Only THB
at the cradle backside).
§ 13) During Phonebook or SMS Download there may be a delay
of actions (End Call, Incoming Call advice, Accept/Decline Call).
Dialing sometimes not working at first attempt -> retry! DTMF
sometimes delayed.
the phone.
§ 26) End call indication in HMI is sometimes delayed, when the
remote partner ended the call.
§ 28) During phonebook download very slow performance.
Phonebook download may take several minutes.
§ 29) There may be a delay of several seconds until handsfree
audio becomes active.
the phone.
§ 26) End call indication in HMI is sometimes delayed, when the
remote partner ended the call.
the phone.
§ 25) Depending on the selected ring tone of the phone there
may be only one ring tone hearable via handsfree audio.
§ 26) End call indication in HMI is sometimes delayed, when the
remote partner ended the call.
§ 27) Only handsfree audio, but no Nav HMI.
Sony
Ericsson
Z 600 MS 5500, MS 5400
Sony Ericsson HCA-20, CA 3033R6C005
Sony Ericsson HCA-20, CA 3033R2L001
Sony
Ericsson
K700i MS 5500, MS 5400
07.07.05 Version 3.1 CI 3000 Software OS4.11Errors and omissions excepted. Subject to modifications.2 / 7
+ + + + + +
+ + + + + +
+ + + + + ++
+ + - + + +-
the phone.
§ 26) End call indication in HMI is sometimes delayed, when the
remote partner ended the call.
the phone.
§ 26) End call indication in HMI is sometimes delayed, when the
remote partner ended the call.
§ 29) Sometimes problems with Mailbox/automatic service
number calls, e.g. no End Call or after that call no DTMF.
+ full functional range
Compatibility List
- not supported
CI 3000 - Communication Interface Module. SW-Version OS4.11
o limited functional range
CI 3000 - Communication Interface Module
Siemens VDO Automotive
Address: Siemens VDO Trading GmbH
Compatibility List
Siemens VDO Automotive
Brand
Type
Navigation Computer
Hands-free Kits
Firmware (Mobile Phone)
Incoming Call
Outgoing Call
CLIP
Call Register
Download Phonebook SIM
Download Phonebook Mobile
Add Phonebook Entry
Delete Phonebook Entry
Volume Up/Dpwn Active Call
Volume up/down Ringing Tone
Read SMS
Write SMS
Incoming SMS advice
Edit SMS
Answer SMS
Call Back SMS
SW Download
Put Mobile Phone in cradle during active call
§ Displayed network provider name sometimes is not complete.
§ 16) SMS: No pop-up on new incoming SMS for some time after
Service & Special Solutions
Kruppstrasse 105, D-60388 Frankfurt/Main
All configurations
listed above
PC 5510, PC 5500,
3)
PC 5400
+ Function supported
- Function not supported
o Function limited
Remarks
§ 1) No CLIP. No Volume changing at the remote control.
§ 3) No support of MC5400 at present!
§ 7) Sometimes the phonebook download may be incomplete,
not all entries are loaded into Navigation.
§ 9) After successful SW download a Navigation shutdown is
required.
§ 10) Problems may occur with some special characters.
§ 12) Possible for SIM phonebook only.
§ 14) During active call PB Download and SMS Download are
interrupted and continue after the end of the call in some
configurations.
§ 15) Call registers are not accessible during PB Download.
start-up during SMS download into Navigation.
§ 17) Some automatic provider announcements (e.g. after
dialing an invalid number) can be ended only at the phone.
§ 18) If the SIM is full, there will be no storage, even if
"successful" was indicated in Nav HMI.
§ 19) Some Provider SMS have a wrong name.
§ 21) SMS of up to 160 characters length are supported.
§ 22) Sometimes no CLIP or no Active Call Indication.
§ 30) In some configurations the call registers may be unsorted.
07.07.05 Version 3.1 CI 3000 Software OS4.11Errors and omissions excepted. Subject to modifications.3 / 7
+ full functional range
Compatibility List
- not supported
CIX 3000 Blue - Bluetooth® Handsfree Terminal. SW-Version BT5.11
o limited functional range
Compatibility List
CIX 3000 Blue - Bluetooth® Handsfree Terminal
Siemens VDO Automotive
Service & Special Solutions
Address: Siemens VDO Trading GmbH,
Siemens VDO Automotive
Accept Call
Recall
End Call
Decline Call
Handsfree/Private Mode
Bluetooth ON/OFF
Volume up/down Active Call
Volume up/down Ringing Tone
Start Voice Recognition
Handsfree Profile
Headset Profile
Reset CIX 3000 Blue
Reconnect during Active Call
Second BT-device: after connection with another device following
16++++++++++-++20++++++++++-++91++++++++++-+
+
25++++++++-+-+
+
o
o
7)
o
4.20------------
-
o
7)
o
1)
o
7)
o6)o
6)
o
4)
o
4)
o
4)
o
4)
o
4)
Second BT-device: after connection with another device following
No dial tone hearable and no mute as long as the call is not
seconds -> malfunction.
No dial tone hearable and no mute as long as the call is not
Kruppstrasse 105, D-60388 Frankfurt/Main
+ Function supported
- Function not supported
o Function limited
Brand
SiemensS 55
SiemensS 55
SiemensS 65
Siemens
Nokia
Nokia
Nokia
Nokia
Nokia
Sony
Ericsson
SX 1
3650
6230
6310
6310i
6600
T 68i
Type
Firmware (Mobile Phone)
SVN07+ + + +
2.50+ + + +
4.28+ + + +
5.52+ + + +
5.27.0+ + + +
R8A015+ + + + + + + +
7)
+ + + + + - + +
+ + + + + - + +
8)
+ + + + + - + +
+
+ + + - + -
+
+ + - + +
+ - + +
Remarks
procedure at the phone is necessary to reconnect with CIX 3000
procedure at the phone is necessary to reconnect with CIX 3000
Blue: Start BT pairing at CIX 3000 Blue; delete all devices from list
Blue: Start BT pairing at CIX 3000 Blue; delete all devices from list
of known BT-devices; switch off BT; switch on BT; search for
of known BT-devices; switch off BT; switch on BT; search for
accessories at the phone.
accessories at the phone.
§ 7) Turn off BT via RCH 3000 or at the phone!
§ 7) Turn off BT via RCH 3000 or at the phone!
§ 8) Only one direction: Handsfree -> Private.
§ BT-settings: select My phones visibility = Shown to all. Select
View paired devices / Options / Request conn. authorisation = No.
Otherwise there may be no BT reconnect after reboarding.
§ 1) Volume should not be adjusted before the call is established
completely.
§ 7) Turn off BT via RCH 3000 or at the phone!
§ 6) Volume settings are not saved.
§ 7) Turn off BT via RCH 3000 or at the phone!
No dial tone hearable and no mute as long as the call is not
established completely.
§ 4) Speech recognition: after using this feature the
communication with the phone remains blocked for several
seconds -> malfunction.
Sony
Ericsson
T 610
RC005+ + + + + + + +
R3A009+ + + + + + + +
Sony
Ericsson
Sony
Ericsson
Sony
Ericsson
07.07.05 Version 3.1 CIX 3000 Blue Software BT4.13Errors and omissions excepted. Subject to modifications.4 / 7
T 630
Z 600
K700i
R6C005+ + + + + + + +
R2L001
+ + + + + + + +
+ - + +
+ - + +
+ - + +
+ - + +
established completely.
§ 4) Speech recognition: after using this feature the
communication with the phone remains blocked for several
seconds -> malfunction.
No dial tone hearable and no mute as long as the call is not
established completely.
§ 4) Speech recognition: after using this feature the
communication with the phone remains blocked for several
seconds -> malfunction.
established completely.
§ 4) Speech recognition: after using this feature the
communication with the phone remains blocked for several
§ 4) Speech recognition: after using this feature the
communication with the phone remains blocked for several
seconds -> malfunction.
+ full functional range
Compatibility List
- not supported
CIX 3000 Blue - Bluetooth® Handsfree Terminal. SW-Version BT5.11
o limited functional range
Compatibility List
CIX 3000 Blue - Bluetooth® Handsfree Terminal
Siemens VDO Automotive
Service & Special Solutions
Address: Siemens VDO Trading GmbH,
Siemens VDO Automotive
Accept Call
Recall
End Call
Decline Call
Handsfree/Private Mode
Bluetooth ON/OFF
Volume up/down Active Call
Volume up/down Ringing Tone
Start Voice Recognition
Handsfree Profile
Headset Profile
Reset CIX 3000 Blue
Reconnect during Active Call
o5)o2)o
3)
§ Phone change: To reconnect with a different phone, turn off
Kruppstrasse 105, D-60388 Frankfurt/Main
+ Function supported
- Function not supported
o Function limited
Brand
All phones listed
above
Any Bluetooth
phone
Type
Firmware (Mobile Phone)
In General all mobile phones supporting the Handsfree/Headset Profile (Bluetooth-Spec. 1.1) are compatible. Implementation exactly
complying with Bluetooth specification 1.1. as well as with Handsfree/Headset specification.
All tested mobile phones are shown in this list. It could not be guaranteed, that all mobile phones and configurations are working
without any limitation.
Remarks
ignition or turn CIX 3000 Blue Off/On via RCH 3000. Only one
phone can be connected at a time.
§ Mute: configure radio settings to low-active (mute at 0Voltage).
§ Bluetooth Pairing: Sometimes wrong name is transmitted, but
the system still works correctly.
§ Installation hint: In case of high distortion in combination with
Tel-In of a radio: Try to change polarity of the speaker-out of CIX
3000 Blue.
§ 2) No mute functionality. Multi-function button is the Speech
button not the green button (IFU).
§ 3) Possibly no mute.
07.07.05 Version 3.1 CIX 3000 Blue Software BT4.13Errors and omissions excepted. Subject to modifications.5 / 7
+ full functional range
Compatibility List
- not supported
CIX 3000 Blue (SW-Version BT5.11) in connection with CI 3000 (SW-Version OS4.11)
o limited functional range
Compatibility List
CIX 3000 Blue in connection with CI 3000
Siemens VDO Automotive
Siemens VDO Automotive
Service & Special Solutions
Address: Siemens VDO Trading GmbH
Kruppstrasse 105, D-60388 Frankfurt/Main
Brand
Type
Navigation Computer
Firmware (Mobile Phone)
Incoming Call
Outgoing Call
CLIP
Call Register
Download Phonebook SIM
Download Phonebook Mobile
Add Phonebook Entry
Delete Phonebook Entry
Read SMS
Write SMS
Incoming SMS advice
Edit SMS
Answer SMS
Call Back SMS
SW Download
Voice Recognition
Functions with RCH 3000
Switch Handsfree/Private
Bluetooth ON/OFF
RESET CIX 3000 Blue
Handsfree Profile
Headset Profile
Volume up/down Active Call
Volume up/down Ringing Tone
Reconnect during Active Call
following procedure at the phone is necessary to reconnect with
§ 11) To switch CIX 3000 Blue on again system start-up is
required.
§ 5) Handsfree audio available, but no Nav HMI. After that a
hang-up of the phone is possible -> disconnect battery
necessary.
§ 9) To switch to Private Mode turn off BT either via RCH3000 or
at the phone!
of actions (End Call, Incoming Call advice, Accept/Decline Call).
Dialing sometimes not working at first attempt -> retry! DTMF
sometimes delayed.
§ 3) During PB download BT is disconnected, later reconnected.
§ 6) Handsfree audio available, but no HMI.
§ 9) To switch to Private Mode turn off BT either via RCH3000 or
at the phone!
§ 10) DTMF sometimes delayed.
§ 8) No mute as long as the call is not established completely.
-
§ 20) First ring tone may be louder than the rest. Sometimes
there is still a loud ring tone after Decline Call or when an
Incoming Call is ended by the remote partner before it is
accepted.
§ 23) There may be a delayed indication in HMI that the remote
partner ended a call.
§ 25) The HMI indicating an Incoming Call may be delayed after
Decline/Accept Call via RCH3000.
§ 26) There may be a ring tone after Accept/Decline Call.
-
-
§ 8) No mute as long as the call is not established completely.
§ 20) First ring tone may be louder than the rest. Sometimes
there is still a loud ring after Decline Call or when an Incoming
Call is ended by the remote partner before it is established
completely.
§ 23) There may be a delayed indication in HMI that the remote
partner ended a call.
§ 24) There may be a ring tone after Accept/Decline Call.
Sometimes Decline Call via RCH3000 does not work at first
attempt -> try again!
§ 25) The HMI indicating an Incoming Call may be delayed after
Decline/Accept Call via RCH3000.
R6C005
+ + + + + + + - + - - +++ + + + - + + -
Sony EricssonZ 600 MS 5500, MS 5400
R2L001
+ + + + + + - - - - - --+ + + + - + + -
Sony EricssonK700i MS 5500, MS 5400
2)
07.07.05 Version 3.1 CI3000 SW OS4.11 and CIX 3000 Blue SW BT5.11Errors and omissions excepted. Subject to modifications.6 / 7
1,4,18)o1,14,21)
§ 8) No mute as long as the call is not established completely.
§ 23) There may be a delayed indication in HMI that the remote
partner ended a call.
§ 26) There may be a ring tone after Accept/Decline Call.
§ 8) No mute as long as the call is not established completely.
§ 13) Accept call: There may be a delay until handsfree audio
starts.
§ 23) There may be a delayed indication in HMI that the remote
partner ended a call.
§ 26) There may be a ring tone after Accept/Decline Call.
§ Phone change: To reconnect with a different phone, turn off
+ full functional range
Compatibility List
- not supported
CIX 3000 Blue (SW-Version BT5.11) in connection with CI 3000 (SW-Version OS4.11)
o limited functional range
Compatibility List
CIX 3000 Blue in connection with CI 3000
Siemens VDO Automotive
Siemens VDO Automotive
Service & Special Solutions
Address: Siemens VDO Trading GmbH
Kruppstrasse 105, D-60388 Frankfurt/Main
Brand
Type
Navigation Computer
Firmware (Mobile Phone)
Incoming Call
Outgoing Call
CLIP
Call Register
Download Phonebook SIM
Download Phonebook Mobile
Add Phonebook Entry
Delete Phonebook Entry
Read SMS
Write SMS
Incoming SMS advice
Edit SMS
Answer SMS
Call Back SMS
SW Download
Voice Recognition
Functions with RCH 3000
Switch Handsfree/Private
Bluetooth ON/OFF
RESET CIX 3000 Blue
Handsfree Profile
Headset Profile
Volume up/down Active Call
Volume up/down Ringing Tone
Reconnect during Active Call
ignition and wait for Nav shutdown (+1min), or turn CIX 3000
§ Displayed network provider name sometimes is not complete.
the system still works correctly.
All phones listed above
+ Function supported
- Function not supported
o Function limited
Remarks
Blue Off/On via RCH 3000. Only one phone can be connected at
a time.
§ No support of MC 5400 via CIX 3000 Blue!
§ Bluetooth Pairing: Sometimes wrong name is transmitted, but
§ 1) Problems may occur with some special characters.
§ 2) CLIP has to be activated at the GSM provider.
§ 4) Possible for SIM phonebook only.
§ 7) Sometimes the phonebook download may be incomplete,
not all entries are loaded into Navigation.
§ 12) Possibly no mute.
§ 14) During active call PB Download and SMS Download are
interrupted and continue after the end of the call in some
configurations.
§ 15) Call registers are not accessible during PB Download.
§ 17) Some automatic provider announcements (e.g. after
dialing an invalid number) can be ended only at the phone.
§ 18) If the SIM is full, there will be no storage, even if
"successful" was indicated in Nav HMI.
§ 19) Problems may occur after very frequent volume change.
§ 21) Some Provider SMS have a wrong name.
§ 27) In some configurations the call registers may be unsorted.
All phones listed above
Any Bluetooth phone
§ SW Download: After successful download a Navigation shutdown is required.
§ Mute: configure radio settings to low-active (mute at 0-Voltage).
§ During SMS or PB Download into Navigation the starting of other actions may lead to problems, e.g. missing PB entry, interruption of incoming call HMI, etc.
§ SMS: No pop-up on new incoming SMS for some time after start-up during SMS download into Navigation.
§ Installation hint: remove cover from SubD25 before mounting CIX 3000 Blue at CI 3000!
§ Installation hint: In case of high distortion in combination with Tel-In of a radio: Try to change polarity of the speaker-out of CIX3000Blue.
§ Installation hint: In case of problems with Mute: Don't connect the Mute-wire of CI3000 with the radio, isolate the wire ends.
In General all mobile phones supporting the Handsfree/Headset Profile (Bluetooth-Spec. 1.1) are compatible. Implementation exactly complying with Bluetooth
specification 1.1. as well as with Handsfree/Headset specification.
All tested mobile phones are shown in this list. It could not be guaranteed, that all mobile phones and configurations are working without any limitation.
07.07.05 Version 3.1 CI3000 SW OS4.11 and CIX 3000 Blue SW BT5.11Errors and omissions excepted. Subject to modifications.7 / 7
Compatibility List
Version 1.1 (8th Dec. 2004)
for
VDO Dayton CI 3000 –
Communication Interface Module
and
VDO Dayton CIX 3000 Blue –
Bluetooth® Handsfree Terminal
CI 3000 - Communication Interface Module
Brand
Type
Navigation Computer
Firmware
Hands-free Kits
supported
Remarks
Siemens HKC-500/540
+
THB UniSystem 8
-
Siemens HKC-540
+
Siemens HKC-500/540
+
Siemens HKC-520
+
Siemens HKV-500
-
THB UniSystem 8
-
THB Compact Talk
-
Nokia Cark 126
+
THB UniSystem 8
+
Siemens VDO Automotive
Service & Special Solutions
Address: Siemens VDO Trading GmbH
Kruppstrasse 105, D-60388 Frankfurt/Main
Compatibility List
Server-Download: CARK126: not possible. THB: possible, but no
No volume control via Navigation remote control.
Server-Download: CARK126: not possible. THB: possible, but no
Server-Download: CARK126: not possible. THB: possible, but no
No volume control via Navigation remote control.
Incoming call: the caller number or name is mostly not
No volume control via Navigation remote control.
Siemens C 55MS 5500, MS 5400
Siemens M 55MS 5500, MS 540010
Siemens S 55MS 5500, MS 5400
20,
Siemens SL 55MS 5500, MS 540020
6100
16,
NokiaMS 5500, MS 5400
Nokia
6310
(i)
MS 5500, MS 5400
4.70
6310-4.16,
6310i-5.50
91
other functionality.
Incoming call: the caller number or name is mostly not
presented correctly (no CLIP).
SMS: No pop-up on new incoming SMS and this SMS is not
visible in the SMS read function of Navigation. Take phone out
of the cradle and put in again to have all SMSs downloaded into
Navigation. The currently loaded list of SMSs is presented in
Navigation, even if not yet completed. SMS writing only up to
80 characters otherwise error message on sending.
Incoming call after start-up, during phonebook download: slow
performance of user actions.
If the user initiates a phonebook download already during SMS
download (after start-up) there may be no phonebook or no
SMS available.No volume control via Navigation remote control
(PR3497).
presented correctly (no CLIP)
SMS: No pop-up on new incoming SMS and this SMS is not
visible in the SMS read function of Navigation. Take phone out
of the cradle and wait until phone button disapears, then put in
again to have all SMSs downloaded into Navigation. The
currently loaded list of SMSs is presented in Navigation, even if
not yet completed. SMS writing only up to 80 characters
otherwise error message on sending.
If the user initiates a phonebook download already during SMS
download (after start-up) there may be no phonebook or no
SMS available.
No support of MC5400!
Nokia
Nokia
6610
7210
MS 5500, MS 5400
MS 5500, MS 5400
Nokia Cark 126+
4.74
Nokia Cark 126+
4.18
other functionality.
Incoming call: the caller number or name is mostly not
presented correctly (no CLIP).
SMS: No pop-up on new incoming SMS and this SMS is not
visible in the SMS read function of Navigation. Take phone out
of the cradle and wait until phone button disapears, then put in
again to have all SMSs downloaded into Navigation. The
currently loaded list of SMSs is presented in Navigation, even if
not yet completed. SMS writing only up to 80 characters
otherwise error message on sending.
Incoming call after start-up, during phonebook download: slow
performance of user actions.
If the user initiates a phonebook download already during SMS
download (after start-up) there may be no phonebook or no
SMS available.
other functionality.
Incoming call: the caller number or name is mostly not
presented correctly (no CLIP).
SMS: No pop-up on new incoming SMS and this SMS is not
visible in the SMS read function of Navigation. Take phone out
of the cradle and wait until phone button disapears, then put in
again to have all SMSs downloaded into Navigation. The
currently loaded list of SMSs is presented in Navigation, even if
not yet completed. SMS writing only up to 80 characters
otherwise error message on sending.
Incoming call after start-up, during phonebook download: slow
performance of user actions.
If the user initiates a phonebook download already during SMS
download (after start-up) there may be no phonebook or no
SMS available.
8th December 2004 Version 1.1Errors and omissions excepted. Subject to modifications.1 / 4
CI 3000 - Communication Interface Module
Brand
Type
Navigation Computer
Firmware
Hands-free Kits
supported
Remarks
Siemens VDO Automotive
Service & Special Solutions
Address: Siemens VDO Trading GmbH
Kruppstrasse 105, D-60388 Frankfurt/Main
Compatibility List
THB UniSystem 8
+
Sony Ericsson HCA-20
+
THB UniSystem 8
+
Sony Ericsson HCA-20
+
THB UniSystem 8
+
Sony Ericsson HCA-20
+
Siemens HKC-540
+
THB UniSystem 8
+-x
Nokia
7250
Nokia7250i
Sony
Ericsson
Sony
Sony
T 610
T 630
Ericsson
Ericsson
T 68i
MS 5500, MS 5400
MS 5500, MS 5400
MS 5500, MS 5400
MS 5500, MS 5400
MS 5500, MS 5400
4.22
R8A015
R1L013
RAE002
Nokia Cark 126+
Server-Download: CARK126: not possible. THB: possible, but no
other functionality.
Incoming call: the caller number or name is mostly not
presented correctly (no CLIP).
SMS: No pop-up on new incoming SMS and this SMS is not
visible in the SMS read function of Navigation. Take phone out
of the cradle and wait until phone button disapears, then put in
again to have all SMSs downloaded into Navigation. The
currently loaded list of SMSs is presented in Navigation, even if
not yet completed. SMS writing only up to 80 characters
otherwise error message on sending.
Incoming call after start-up, during phonebook download: slow
performance of user actions.
If the user initiates a phonebook download already during SMS
download (after start-up) there may be no phonebook or no
SMS available.
No volume control via Navigation remote control.
Server-Download: CARK126: not possible. THB: possible, but no
other functionality.
Incoming call: the caller number or name is mostly not
presented correctly (no CLIP).
SMS: No pop-up on new incoming SMS and this SMS is not
visible in the SMS read function of Navigation. Take phone out
of the cradle and wait until phone button disapears, then put in
again to have all SMSs downloaded into Navigation. The
currently loaded list of SMSs is presented in Navigation, even if
not yet completed. SMS writing only up to 80 characters
otherwise error message on sending.
Incoming call after start-up, during phonebook download: slow
performance of user actions.
If the user initiates a phonebook download already during SMS
download (after start-up) there may be no phonebook or no
SMS available.
No volume control via Navigation remote control.
Speech recognition: after using this feature the connection with
CI3000 remains blocked for several seconds
Speech recognition: after using this feature the connection with
CI3000 remains blocked for several seconds
MC 5400
AllMS 5500, MS 5400
SW Download: After successful download Navigation has to be
reset by switching off Ignition and waiting 1 min + the delay
that was selected in Navigation settings.
-
SMS: No pop-up on new incoming SMS for some time after startup during SMS download into Navigation.
8th December 2004 Version 1.1Errors and omissions excepted. Subject to modifications.2 / 4
Compatibility List
CIX 3000 Blue - Bluetooth® Handsfree Terminal
Brand
Type
Firmware
supported
Remarks
16+20
+
+++
R8A015
+
R1L013
+
RAE002
++-
Telefon SW:
R2C
-
-
+
-
Siemens VDO Automotive
Service & Special Solutions
Address: Siemens VDO Trading GmbH
Kruppstrasse 105, D-60388 Frankfurt/Main
BT-Paging: only one phone can be connected at a time. Turn
Mute: configure radio settings to low-active (mute at 0-Voltage).
Speech recognition: after using this feature the connection with
(PR3414).
Speech recognition: after using this feature the connection with
(PR3414).
Second BT-CarKit: after connection with another carkit following
Use Headset-Profile only!
No. Otherwise there may be no BT reconnect after reboarding
Siemens
S 55
91+
procedure at the phone is necessary to reconnect with
CIX3000Blue: Delete all carkits from list of known BT-devices;
switch off BT; switch on BT; start BT pairing at CIX3000Blue
(IFU); search for accessories at phone (PR3275).
Siemens
Nokia
Nokia
Nokia
Nokia
Nokia
Sony
Ericsson
Sony
Ericsson
Sony
Ericsson
SX 1
3650
6230
6310
6310i
6600
T 68i
T 610
T 630
4.16+
4.20+
5.50+
3.42.1+
BT-settings: select My phones visibility = Shown to all. Select
View paired devices / Options / Request conn. authorisation =
CI3000 remains blocked for several seconds -> malfunction
CI3000 remains blocked for several seconds -> malfunction
Sony
Ericsson
Sony
Ericsson
Sony
Ericsson
All
Speech recognition: after using this feature the connection with
Z 600
CI3000 remains blocked for several seconds -> malfunction
(PR3414).
CXC162002
P 800
R1D
Bluetooth:
-
Use Headset-Profile only!
No constant BT connection possible.
CXC12529
K700iUse Handsfree-Profile only!
ignition off and on to change the phone.
BT-Pairing of the 6th phone: Not the 5th phone is deleted from
the list of paired phones (IFU), but the phone that has not been
connected for the longest time.
8th December 2004 Version 1.1Errors and omissions excepted. Subject to modifications.3 / 4
Compatibility List
CIX 3000 Blue in connection with CI 3000
Brand
Type
Navigation Computer
Firmware
supported
Remarks
16+20
+
?-4.16+4.20+5.50+R8A015
+
R1L013
+
RAE002
+
Siemens VDO Automotive
Service & Special Solutions
Address: Siemens VDO Trading GmbH
Kruppstrasse 105, D-60388 Frankfurt/Main
SW Download: After successful download CI 3000 has to be reset
Switch off CIX 3000 Blue by RCH 3000: phone button/menu
CIX3000Blue will do a BT-Reconnect at once after Ignition-on, but
Write SMS: not supported yet. Speech recognition: after using
Write SMS: not supported yet. Speech recognition: after using
several seconds -> malfunction.
Siemens
MS 5500, MS 5400S 55
91+
Second BT-CarKit: after connection with another carkit following
procedure at the phone is necessary to reconnect with CIX 3000
Blue: Delete all carkits from list of known BT-devices; switch off
BT; switch on BT; start BT pairing at CIX 3000 Blue (IFU); search
for accessories at phone.
Siemens
Nokia
Nokia
Sony
Ericsson
Sony
Ericsson
Sony
Ericsson
SX 1
6310iMS 5500, MS 5400
T 68i
T 610
T 630
MS 5500, MS 5400
MS 5500, MS 54006310
MS 5500, MS 5400
MS 5500, MS 5400
MS 5500, MS 5400
AllMS 5500, MS 5400
AllMS 5500, MS 5400
Use Headset-Profile only!
BT-settings: select My phones visibility = Shown to all. Select
Otherwise there may be no BT reconnect after reboarding.
SW download: ok with phone firmware 4.16, not working with
4.20.
No SMS functionality.
During phonebook download very slow performance.
this feature the connection with CI3000 remains blocked for
this feature the connection with CI3000 remains blocked for
remains enabled.
Compatibility mode: when there is no specific phone driver
installed in CI 3000, there will be no user prompt for SW
download, but the system will support BT Handsfree Profile only.
BT-Reconnect: CI 3000 remains on 6 min after Navigation
shutdown. If Ignition is switched off and on within this time,
the phone button will appear only after that time.
No support of MC 5400!
by switching off Ignition and waiting 6 min after Navigation
shutdown.
BT-Paging: only one phone can be connected at a time. Turn
ignition off and on to change the phone.
BT-Pairing of the 6th phone: Not the 5th phone is deleted from
the list of paired phones (IFU), but the phone that has not been
connected for the longest time.
Mute: configure radio settings to low-active (mute at 0-Voltage).
SMS: No pop-up on new incoming SMS for some time after startup during SMS download into Navigation.
Installation hint: remove cover from SubD25 before mounting
8th December 2004 Version 1.1Errors and omissions excepted. Subject to modifications.4 / 4
Loading...
+ hidden pages
You need points to download manuals.
1 point = 1 manual.
You can buy points or you can get point for every manual you upload.