28.01.2000 2020-IM1-eng-frz-spa-Anfang.fm euroset 2020, A31008-E2020-B100-1-3S19
User’s Guide
euroset 2020
euroset
2020
Repertory keys
Touches de sélection
Teclas de destino
Explanation of keys and display symbols
Keys
" Set key a Shift key
L Mute key
2 Enquiry call key
Display
in save mode
^Shift key pressed
TMicrophone off
PEnquiry call key pressed
•Call waiting on
iCall forwarding immediately
hCall forwarding on no reply
gCall forwarding on busy
]Message received
jAnonymous call on
|Battery exhausted
/Redial key
kCall list key
Special function
_________ Call (with calling line identification restriction)
Ready
KCursor
1Pause
RMemory empty
RRRR Telephone locked
1 – 0 Call number
In tone dialling mode:
J– key pressed
– key pressed
28.01.2000 2020-IM1-eng-frz-spa-Anfang.fm euroset 2020, A31008-E2020-B100-1-3S19
Getting started
Connection (see diagram).
Attach the handset cord and connect the phone cord to the wall socket.
<
– 3 – |
English |
28.01.2000 2020-IM1-eng-frz-spa-Anfang.fm euroset 2020, A31008-E2020-B100-1-3S19
Inserting/ replacing the batteries
A caller’s number will only appear on the display and calls will only be saved in the call list if batteries have been inserted.
If no batteries have been inserted, or if the battery charge is critically low, the |symbol appears on the display when the handset is lifted.
Before inserting or removing the batteries, disconnect the telephone cord from the wall socket or from the phone itself.
Only use 1.5 V AA type alkaline batteries, as specified!
1.Slide off the battery compartment cover from the edge of the base of the housing (see diagram S. 3).
2.Insert the batteries (1.5 V Type AA alkaline) into the battery compartment in accordance with the polarity symbols (+/-).
3.Replace the battery compartment cover.
– 4 –
English
28.01.2000 2020-IM1-eng-frz-spa-Anfang.fm euroset 2020, A31008-E2020-B100-1-3S19
Setting the internal clock
> " LIft the handset, then start the function.
The time currently set is displayed in 24-hour clock mode.
JEnter the correct time in hours <hh> and minutes <mm> (24-hour clock mode).
" < Press the set key, then replace the handset.
Your telephone is now ready to use.
– 5 –
English
28.01.2000 2020-IM1-eng.fm
euroset 2020, A31008-E2020-B100-1-3S19
Safety information
For your safety and protection, the phone should not be used in bathrooms or shower rooms (wet rooms). The phone is not splash-proof.
The phone should only be disposed of in an environmentally friendly manner.
Never give the Euroset 2020 to a third party without the operating instructions.
Note on saving phone settings
Various telephone setting have to be confirmed with the set key "if they are to be permanently available.
To cancel the setting procedure (e.g. after an incorrect entry) without saving, replace the handset instead of pressing ". The original setting is then unchanged.
Saving call numbers
Saving repertory numbers/notebook function
You can save up to 20 call numbers using the two levels of the repertory keys, see also „Using functions for additional services on public telephone systems“ on page 10.
> " Lift the handset, then press the set key. (Also press afor the 2nd storage level.)
KPress the repertory key under which the repertory call number is to be stored.
J
/
Any call number already saved will appear on the display. If the memory for this repertory key is empty, the display shows a 4symbol
Enter the call number to be stored (max. 32 digits).
or
Save with notebook function:
Press the redial key.
k... k
" <
The last call number dialled is displayed.
or
Save from the call list (if this service is available)
Press the call list key until the required call number appears on the display.
Press the set key then replace the handset.
You can store dial pauses of 3 seconds by pressing /(a pause should not occur as the first element in a call number).
After the 20th digit, any subsequent digits are shifted from right to left on the display.
– 6 –
English