Loading...
Operating Instructions
VACUUM CLEANER
Before operating this unit, please read the instructions carefully.
For indoor use only.
Register your product at www.samsung.com/global/register
IMPORTANT SAFEGUARDS
1.Read all instructions carefully. Before switching on, make sure that the voltage of your electricity supply is the same as that indicated on the rating plate on the bottom of the cleaner.
2.WARNING: Do not use the vacuum cleaner when rug or floor is wet.
Do not use to suck up water.
3.This appliance is not intended for use by young children or infirm persons unless they have been adequately supervised by a responsible person to ensure that they can use the appliance safely. Young children should be supervised to ensure that they do not play with the appliance.
4.Do not use the vacuum cleaner without the dust bag. Empty the dust bag before it is full in order to maintain the best efficiency.
5.Slide to the Stop(or Min)position before inserting a plug into the electrical outlet.
6.Do not use the vacuum cleaner to pick up matches, live ashes or cigarette butts. Keep the vacuum cleaner away from stoves and other heat sources. Heat can deform and discolour the plastic parts of the unit.
7.Avoid picking up hard, sharp objects with the vacuum cleaner as they may damage the cleaner parts. Do not stand on the hose assembly. Do not put a weight on the hose. Do not block the suction or the exhaustion part.
8.Switch the vacuum cleaner off at the machine before unplugging from the electrical outlet. Grasp the plug to disconnect cord from the electrical outlet before caring the dust bag and filters.
9.The plug must be removed from the socket out-let before cleaning or maintaining the appliance.
10.The use of an extension cord is not recommended.
11.If your vacuum cleaner is not operating correctly, switch off the power supply and consult an authorized service agent.
12.If the supply cord is damaged, it must be replaced by the manufacturer or its service agent or a similarly qualified person in order to avoid a hazard.
13.The vacuum cleaner is provided with a self-resetting thermal cut-out protection which automatically shut off current on over heating. Overheating can be caused by blockage in the filter, nozzle, tube or hose. After removing the cause and cooling the motor, vacuum cleaner automatically start again.
1
1ASSEMBLING THE CLEANER
OPTION |
▼ Features may vary according to model. |
Parking floor nozzle for easier storage.
2
2OPERATING THE CLEANER
2-1 POWER CORD |
2-2 ON/OFF SWITCH |
|
(BODY CONTROL TYPE ONLY) |
NOTE
Grasp the plug to disconnect cord from the electrical outlet.
2-3 POWER CONTROL
1) HANDLECONTROL TYPE
• SLIDE TO THE STOP POSITION
Vacuum cleaner switches off(stand by mode)
• SLIDE FORWARD TO MAX |
|
Suction capacity increase smoothly up to maximum. |
HANDLE CONTROL TYPE ONLY |
|
2) BODY CONTROL TYPE
MIN = For delicate surface e.g. net curtains.
MAX = For hard floors and heavily soiled carpets.
BODY CONTROL TYPE ONLY
2-4 AIR CONTROL
To reduce suction for cleaning draperies, small rugs, and other light fabrics, pull the tap air until the hole is open.
BODY CONTROL TYPE ONLY
3
2-5 USING FLOOR TOOLS
Carpets
CREVICE
Bare floors
DUSTING
OPTION |
Detach transparent drum |
|
cover for easy cleaning. |
3DUST FULL INDICATOR
If the "Filter Check" indicator turns to red color while you are cleaning, the dust bag requires replacement
NOTE : If the "Filter Check" indicator continues to display red color even after having changed bag into new one, turn the cleaner off and check if there is any clogging in the hose,tube,floor nozzle,or on the inlet/outlet filter.
4
Loading...