User Manual
DB32E DB40E DB48E DB55E
DM32E DM40E DM48E DM55E
DH40E DH48E DH55E
The colour and the appearance may differ depending on the product, and the specifications are subject to change without prior notice to improve the performance.
Recommended hours of use per day for the DBE models is less than 16 hours.
If the product is used for longer than 16 hours a day, the warranty may be void.
Table of contents
Before Using the Product
Copyright |
7 |
|
|
Safety Precautions |
8 |
Symbols |
8 |
Cleaning |
8 |
Storage |
9 |
Electricity and Safety |
9 |
Installation |
10 |
Operation |
12 |
Preparations
Checking the Components |
15 |
Components |
15 |
|
|
Parts |
16 |
Control Panel |
16 |
Reverse Side |
18 |
Plug In Module (Sold separately) |
21 |
Anti-theft Lock |
21 |
Spacer logo |
22 |
Remote Control |
23 |
Connection Using an IR Stereo Cable (sold |
|
separately) |
25 |
|
|
Before Installing the Product (Installation |
|
Guide) |
26 |
Tilting Angle and Rotation |
26 |
Ventilation |
26 |
|
|
Dimensions |
28 |
Using the COVER-JACK |
29 |
|
|
Installing the Wall Mount |
30 |
Installing the Wall Mount |
30 |
Wall Mount Kit Specifications (VESA) |
30 |
|
|
Remote Control (RS232C) |
32 |
Cable Connection |
32 |
Connection |
35 |
Control Codes |
36 |
Connecting and Using a Source
Device
Before Connecting |
45 |
Pre-connection Checkpoints |
45 |
|
|
Connecting to a PC |
45 |
Connection using the D-SUB cable |
|
(Analogue type) |
45 |
Connection using a DVI cable (Digital type) |
46 |
Connection Using an HDMI-DVI Cable |
46 |
Connection Using an HDMI Cable |
47 |
Connection Using an DP Cable |
47 |
|
|
Connecting an External Monitor |
48 |
|
|
Connecting to a Video Device |
49 |
Connection Using the AV Cable |
49 |
Connection Using the component Cable |
49 |
Connection Using an HDMI-DVI Cable |
50 |
Connection Using an HDMI Cable |
51 |
|
|
Connecting the LAN Cable |
52 |
Changing the Input source |
53 |
Source |
53 |
Using MDC
MDC Programme Installation/Uninstallation 54
Installation |
54 |
Uninstallation |
54 |
|
|
Connecting to MDC |
55 |
Using MDC via RS-232C (serial data |
|
communications standards) |
55 |
Using MDC via Ethernet |
56 |
Home feature
Player |
58 |
Approving a connected device from the server |
59 |
Network Channel |
63 |
Local Channel |
63 |
Published Content |
63 |
My Templates |
63 |
Available features in the Player page |
64 |
Player page Settings menu |
65 |
When Content is Running |
67 |
File Formats Compatible with Player |
69 |
File Formats Compatible with Videowall |
74 |
Schedule |
76 |
Available features in the Schedule page |
76 |
2
Table of contents
Template |
78 |
|
|
Clone Product |
81 |
|
|
ID Settings |
82 |
Device ID |
82 |
PC Connection Cable |
82 |
Device ID Auto Set |
82 |
|
|
Video Wall |
83 |
Apply to |
83 |
Video Wall |
84 |
|
|
Network Status |
85 |
|
|
Picture Mode |
86 |
|
|
On/Off Timer |
87 |
On Timer |
87 |
Off Timer |
88 |
Holiday Management |
88 |
|
|
Ticker |
89 |
|
|
More settings |
89 |
|
|
URL Launcher |
90 |
Screen Adjustment
Picture Mode |
91 |
|
|
Backlight / Contrast / Brightness / |
|
Sharpness / Colour / Tint (G/R) |
92 |
|
|
Colour Temperature |
93 |
White Balance |
94 |
2 Point |
94 |
10 Point |
94 |
|
|
Gamma |
95 |
|
|
Calibrated value |
95 |
|
|
Advanced Settings |
96 |
Dynamic Contrast |
97 |
Black Tone |
97 |
Flesh Tone |
97 |
RGB Only Mode |
97 |
Colour Space |
97 |
Motion Lighting |
97 |
|
|
Picture Options |
98 |
Colour Tone |
99 |
Digital Clean View |
99 |
MPEG Noise Filter |
99 |
HDMI Black Level |
100 |
Film Mode |
100 |
Dynamic Backlight |
100 |
|
|
Picture Size |
101 |
Picture Size |
101 |
Position |
102 |
Zoom/Position |
102 |
Resolution |
103 |
|
|
Auto Adjustment |
104 |
|
|
PC Screen Adjustment |
104 |
|
|
Picture Off |
105 |
|
|
Reset Picture |
105 |
OnScreen Display
PIP |
106 |
PIP Settings |
106 |
|
|
Display Orientation |
108 |
Onscreen Menu Orientation |
108 |
Source Content Orientation |
108 |
Aspect Ratio |
108 |
|
|
Screen Protection |
109 |
Auto Protection Time |
109 |
Screen Burn Protection |
109 |
|
|
Message Display |
112 |
Source Info |
112 |
Multimedia Device Connection |
112 |
No Signal Message |
112 |
MDC Message |
112 |
Download Status Message |
112 |
|
|
Menu Language |
113 |
|
|
Reset OnScreen Display |
113 |
Sound Adjustment
Sound Mode |
114 |
|
|
Sound Effect |
115 |
Virtual Surround |
115 |
Dialog Clarity |
115 |
Equaliser |
115 |
3
Table of contents
HDMI Sound |
116 |
|
|
Sound on Video Call |
116 |
|
|
Dolby Digital Comp |
117 |
|
|
Speaker Settings |
117 |
Sound Output |
117 |
|
|
Auto Volume |
118 |
|
|
Reset Sound |
118 |
Network
Network Status |
119 |
|
|
Network Settings |
119 |
Network type |
119 |
Network Settings (Wired) |
120 |
Network Setting (Wireless) |
122 |
WPS(PBC) |
124 |
|
|
Wi-Fi Direct |
125 |
|
|
Multimedia Device Settings |
125 |
|
|
Screen Mirroring |
126 |
Screen Mirroring |
126 |
|
|
Server Network Settings |
126 |
Connect to server |
126 |
MagicInfo Mode |
126 |
Server Access |
126 |
FTP Mode |
126 |
Device Name |
127 |
System
Accessibility |
128 |
Menu Transparency |
128 |
High Contrast |
128 |
Enlarge |
128 |
Setup |
129 |
Initial settings (System) |
129 |
|
|
Touch Control |
131 |
Touch Control Lock |
131 |
Admin Menu Lock |
131 |
|
|
Time |
132 |
Clock Set |
132 |
DST |
132 |
Sleep Timer |
132 |
Power On Delay |
132 |
|
|
Auto Source Switching |
133 |
Auto Source Switching |
133 |
Primary Source Recovery |
133 |
Primary Source |
133 |
Secondary Source |
133 |
|
|
Power Control |
134 |
Auto Power On |
134 |
PC module power |
134 |
Max. Power Saving |
134 |
Standby Control |
135 |
Power Button |
135 |
Network Standby |
135 |
|
|
Eco Solution |
136 |
Energy Saving |
136 |
Eco Sensor |
136 |
Screen Lamp Schedule |
136 |
No Signal Power Off |
137 |
Auto Power Off |
137 |
|
|
Temperature Control |
137 |
|
|
Device Manager |
138 |
Keyboard Settings |
138 |
Mouse Settings |
139 |
Pointer Settings |
140 |
|
|
Play via |
141 |
|
|
Change PIN |
141 |
|
|
Security |
142 |
Safety Lock |
142 |
Button Lock |
142 |
USB Auto Play Lock |
142 |
|
|
General |
143 |
Smart Security |
143 |
BD Wise |
144 |
Anynet+ (HDMI-CEC) |
145 |
Troubleshooting for Anynet+ |
147 |
HDMI Hot Plug |
149 |
DivX® Video On Demand |
149 |
Game Mode |
149 |
|
|
Reset System |
150 |
4
Table of contents
Support
Software Update |
151 |
Update now |
151 |
Auto update |
151 |
|
|
Contact Samsung |
152 |
|
|
Go to Home |
153 |
Player |
153 |
Schedule |
153 |
Template |
153 |
Clone Product |
153 |
ID Settings |
153 |
Video Wall |
154 |
Network Status |
154 |
Picture Mode |
154 |
On/Off Timer |
154 |
Ticker |
154 |
More settings |
154 |
|
|
Reset All |
155 |
Playing photos, videos and music (Media Play)
Read the following before using media |
|
play with a USB device |
156 |
Using a USB device |
158 |
Playing media content from a PC/mobile device 159
Features provided in the media content list |
|
page |
160 |
Menu items in the media content list page |
161 |
|
|
Available buttons and features during photo |
|
playback |
162 |
|
|
Available buttons and features during video |
|
playback |
163 |
|
|
Available buttons and features during music |
|
playback |
164 |
|
|
Supported Subtitle and Media play file |
|
formats |
165 |
Subtitle |
165 |
Supported image resolutions |
165 |
Supported music file formats |
166 |
Supported Video Formats |
166 |
Troubleshooting Guide
Requirements Before Contacting Samsung |
|
Customer Service Centre |
168 |
Testing the Product |
168 |
Checking the Resolution and Frequency |
168 |
Check the followings. |
169 |
|
|
Q & A |
176 |
Specifications
General |
178 |
|
|
PowerSaver |
181 |
|
|
Preset Timing Modes |
183 |
5
Table of contents
Appendix
Responsibility for the Pay Service |
|
(Cost to Customers) |
185 |
Not a product defect |
185 |
A Product damage caused by customer's fault |
185 |
Others |
185 |
WEEE |
186 |
Correct Disposal of This Product |
|
(Waste Electrical & Electronic Equipment) |
186 |
Correct disposal of batteries in this product |
186 |
|
|
Optimum Picture Quality and Afterimage |
|
Burn-in Prevention |
187 |
Optimum Picture Quality |
187 |
Prevention of Afterimage Burn-in |
187 |
|
|
Licence |
189 |
|
|
Terminology |
190 |
6
Chapter 01
Before Using the Product
Copyright
The contents of this manual are subject to change without notice to improve quality.
© 2015 Samsung Electronics
Samsung Electronics owns the copyright for this manual.
Use or reproduction of this manual in parts or entirety without the authorization of Samsung Electronics is prohibited.
Microsoft, Windows are registered trademarks of Microsoft Corporation.
VESA, DPM and DDC are registered trademarks of the Video Electronics Standards Association.
Ownership of all other trademarks is attributed to their due owner.
•• An administration fee may be charged if either
-- (a) an engineer is called out at your request and there is no defect in the product (i.e. where you have failed to read this user manual).
-- (b) you bring the unit to a repair centre and there is no defect in the product (i.e. where you have failed to read this user manual).
•• The amount of such administration charge will be advised to you before any work or home visit is carried out.
7
Safety Precautions
Caution
RISK OF ELECTRIC SHOCK DO NOT OPEN
Caution : TO REDUCE THE RISK OF ELECTRIC SHOCK, DO NOT REMOVE COVER. (OR BACK) THERE ARE NO USER SERVICEABLE PARTS INSIDE.
REFER ALL SERVICING TO QUALIFIED PERSONNEL.
This symbol indicates that high voltage is present inside.
It is dangerous to make any kind of contact with any internal part of this product.
This symbol alerts you that important literature concerning operation and maintenance has been included with this product.
Symbols
Warning
A serious or fatal injury may result if instructions are not followed.
Caution
Personal injury or damage to properties may result if instructions are not followed.
Activities marked by this symbol are prohibited.
Instructions marked by this symbol must be followed.
Cleaning
――Exercise care when cleaning as the panel and exterior of advanced LCDs are easily scratched. ――Take the following steps when cleaning.
――The following images are for reference only. Real-life situations may differ from what is shown in the images.
1 |
Power off the product and computer. |
2 |
Disconnect the power cord from the product. |
――Hold the power cable by the plug and do not touch the cable with wet hands. Otherwise, an electric shock may result.
3 Wipe the product with a clean, soft and dry cloth.
•• Do not use detergents that contain alcohol, solvent or
surface-active agents.
!
•• Do not spray water or detergent directly on the product.
4 Wet a soft and dry cloth in water and wring thoroughly to clean the exterior of the product.
5 |
Connect the power cord to the product when cleaning is finished. |
6 |
Power on the product and computer. |
8
Storage
Due to the characteristics of high-glossy products, using a UV humidifier nearby may create whitecoloured stains on the product.
――Contact Customer Service Centre if the inside of the product needs cleaning (service fee will be charged).
Electricity and Safety
――The following images are for reference only. Real-life situations may differ from what is shown in the images.
Warning
Do not use a damaged power cord or plug, or a loose power socket.
•• An electric shock or fire may result.
Do not use multiple products with a single power socket.
•• Overheated power sockets may cause a fire.
Do not touch the power plug with wet hands. Otherwise, an electric shock may result.
Insert the power plug all the way in so it is not loose.
•• An unsecure connection may cause a fire.
!
Connect the power plug to a grounded power socket (type 1 insulated devices only).
•• An electric shock or injury may result.
!
Do not bend or pull the power cord with force. Be careful not to leave the power cord under a heavy object.
•• Damage to the cord may result in a fire or electric shock.
Do not place the power cord or product near heat sources.
•• A fire or electric shock may result.
Clean any dust around the pins of the power plug or the power socket with a dry cloth.
•• A fire may result.
!
9
Caution
!
!
!
Do not disconnect the power cord while the product is being used.
•• The product may become damaged by an electric shock.
Only use the power cord provided with your product by Samsung. Do not use the power cord with other products.
•• A fire or electric shock may result.
Keep the power socket where the power cord is connected unobstructed.
•• The power cord must be disconnected to cut off power to the product when an issue occurs.
•• Note that the product is not completely powered down by using only the power button on the remote.
Hold the plug when disconnecting the power cord from the power socket.
•• An electric shock or fire may result.
Installation
Warning
DO NOT PLACE CANDLES, INSECT REPELLANTS OR CIGARETTES ON TOP OF THE PRODUCT. DO NOT INSTALL THE PRODUCT NEAR HEAT SOURCES.
•• A fire may result.
Have a technician install the wall-mount hanger.
•• Installation by an unqualified person can result in an injury.
•• Only use approved cabinets.
!
Do not install the product in poorly ventilated spaces such as a bookcase or closet.
•• An increased internal temperature may cause a fire.
Install the product at least 10 cm away from the wall to allow ventilation.
•• An increased internal temperature may cause a fire.
!
Keep the plastic packaging out of the reach of children.
•• Children may suffocate.
!
10
! |
Do not install the product on an unstable or vibrating surface (insecure shelf, |
Caution |
sloped surface, etc.) |
|
•• The product may fall and become damaged and/or cause an injury. |
|
•• Using the product in an area with excess vibration may damage the |
|
product or cause a fire. |
|
Do not install the product in a vehicle or a place exposed to dust, moisture |
! |
(water drips, etc.), oil, or smoke. |
|
•• A fire or electric shock may result. |
|
Do not expose the product to direct sunlight, heat, or a hot object such as a |
|
stove. |
|
•• The product lifespan may be reduced or a fire may result. |
|
Do not install the product within the reach of young children. |
|
•• The product may fall and injure children. |
|
•• As the front is heavy, install the product on a flat and stable surface. |
|
Edible oil, such as soybean oil, can damage or deform the product. Do not |
! |
install the product in a kitchen or near a kitchen counter. |
|
|
SAMSUNG |
|
! |
Do not drop the product while moving.
•• Product failure or personal injury may result.
Do not set down the product on its front.
•• The screen may become damaged.
When installing the product on a cabinet or shelf, make sure that the bottom edge of the front of the product is not protruding.
•• The product may fall and become damaged and/or cause an injury.
•• Install the product only on cabinets or shelves of the right size.
Set down the product gently.
•• Product failure or personal injury may result.
Installing the product in an unusual place (a place exposed to a lot of fine dust, chemical substances, extreme temperatures or a significant presence of moisture, or a place where the product will operate continuously for an extended period of time) may seriously affect its performance.
•• Be sure to consult Samsung Customer Service Centre if you want to install the product at such a place.
11
Operation
Warning
There is a high voltage inside the product. Never disassemble, repair or modify the product yourself.
•• A fire or electric shock may result.
•• Contact Samsung Customer Service Centre for repairs.
!
Before moving the product, turn off the power switch and disconnect the power cable and all other connected cables.
•• Damage to the cord may result in a fire or electric shock.
!
!
If the product generates abnormal sounds, a burning smell or smoke,
disconnect the power cord immediately and contact Samsung Customer
Service Centre.
•• An electric shock or fire may result.
!
Do not let children hang from the product or climb on top of it.
•• Children may become injured or seriously harmed.
!
If the product is dropped or the outer case is damaged, turn off the power switch and disconnect the power cord. Then contact Samsung Customer Service Centre.
•• Continued use can result in a fire or electric shock.
Do not leave heavy objects or items that children like (toys, sweets, etc.) on top of the product.
•• The product or heavy objects may fall as children try to reach for the toys or sweets resulting in a serious injury.
During a lightning or thunderstorm, power off the product and remove the power cable.
•• A fire or electric shock may result.
Do not drop objects on the product or apply impact.
•• A fire or electric shock may result.
Do not move the product by pulling the power cord or any cable.
•• Product failure, an electric shock or fire may result from a damaged cable.
If a gas leakage is found, do not touch the product or power plug. Also, ventilate the area immediately.
•• Sparks can cause an explosion or fire.
GAS
Do not lift or move the product by pulling the power cord or any cable.
•• Product failure, an electric shock or fire may result from a damaged cable.
12
Do not use or keep combustible spray or an inflammable substance near the product.
•• An explosion or fire may result.
!
Ensure the vents are not blocked by tablecloths or curtains.
•• An increased internal temperature may cause a fire.
|
Do not insert metallic objects (chopsticks, coins, hairpins, etc) or objects |
100 |
that burn easily (paper, matches, etc) into the product (via the vent or input/ |
|
output ports, etc). |
•• Be sure to power off the product and disconnect the power cord when water or other foreign substances have entered the product. Then contact Samsung Customer Service Centre.
•• Product failure, an electric shock or fire may result.
Do not place objects containing liquid (vases, pots, bottles, etc) or metallic objects on top of the product.
•• Be sure to power off the product and disconnect the power cord when water or other foreign substances have entered the product. Then contact Samsung Customer Service Centre.
•• Product failure, an electric shock or fire may result.
Caution
!
-_-
!
!
!
Leaving the screen fixed on a stationary image for an extended period of time may cause afterimage burn-in or defective pixels.
•• Activate power-saving mode or a moving-picture screen saver if you will not be using the product for an extended period of time.
Disconnect the power cord from the power socket if you do not plan on using the product for an extended period of time (vacation, etc).
•• Dust accumulation combined with heat can cause a fire, electric shock or electric leakage.
Use the product at the recommended resolution and frequency.
•• Your eyesight may deteriorate.
Do not hold the product upside-down or move it by holding the stand.
•• The product may fall and become damaged or cause an injury.
Looking at the screen too close for an extended period of time can deteriorate your eyesight.
Do not use humidifiers or stoves around the product.
•• A fire or electric shock may result.
13
Rest your eyes for more than 5 minutes for every 1 hour of product use.
•• Eye fatigue will be relieved.
!
Do not touch the screen when the product has been turned on for an extended period of time as it will become hot.
Store small accessories out of the reach of children.
!
Exercise caution when adjusting the product angle or stand height.
•• Your hand or finger may get stuck and injured.
•• Tilting the product at an excessive angle may cause the product to fall
and an injury may result.
!
Do not place heavy objects on the product.
•• Product failure or personal injury may result.
When using headphones or earphones, do not turn the volume too high.
•• Having the sound too loud may damage your hearing.
Be careful that children do not place the battery in their mouths when removed from the remote control. Place the battery in a location that children or infants cannot reach.
•• If children have had the battery in their mouths, consult your doctor immediately.
When replacing the battery, insert it with the right polarity (+, -).
•• Otherwise, the battery may become damaged or it may cause fire, personal injury or damage due to leakage of the internal liquid.
Use only the specified standardized batteries, and do not use a new battery and a used battery at the same time.
•• Otherwise, the batteries may be damaged or cause fire, personal injury or damage due to a leakage of the internal liquid.
!
The batteries (and rechargeable batteries) are not ordinary refuse and must be returned for recycling purposes. The customer is responsible for returning
the used or rechargeable batteries for recycling.
•• The customer can return used or rechargeable batteries to a nearby ! public recycling centre or to a store selling the same type of the
battery or rechargeable battery.
14
Chapter 02
Preparations
-- Contact the vendor where you purchased the product if any components are missing.
-- A stand is not provided with the product. To install a stand, you can purchase one separately.
-- The RS232C adapter can be used to connect to another monitor using the D-SUB (9-pin) type RS232C cable.
Checking the Components
Components
――Components may differ in different locations.
Warranty card |
Regulatory guide |
Power cord |
Quick Setup Guide |
||
(Not available in some locations) |
|
|
- |
|
|
+ |
|
|
- |
|
|
+ |
|
|
Batteries |
D-SUB cable |
RS232C(IN) adapter |
Remote Control |
||
(Not available in some locations) |
|
|
Screw |
(M3L8, 1EA) |
COVER-JACK |
|
|
(M4L8, 4EA) |
15
Parts
Control Panel
Panel Key
Speaker
DB32E DM32E
Speaker
Remote sensor
――The colour and shape of parts may differ from what is shown. Specifications are subject to change without notice to improve quality.
Panel Key
Buttons |
Description |
|
|
|
Power on the product. |
|
If you press the button when the product is turned on, the control menu will be |
displayed.
――To exit the OSD menu, press and hold the panel key for at least one second.
Move to the upper or lower menu. You can also adjust the value of an option.
Move to the left or right menu.
――You can adjust the volume by moving the panel key left or right when the control menu is not displayed.
|
Press a button on the remote control pointing at the sensor on the front of the |
|
Remote sensor |
product to perform the corresponding function. |
|
――Using other display devices in the same space as the remote control of this |
||
|
||
|
product can cause the other display devices to be inadvertently controlled. |
Use the remote control within 7 m to 10 m from the sensor on the product at an angle of 30 from the left and right. ――Store used batteries out of reach of children and recycle.
――Do not use a new and used battery together. Replace both batteries at the same time. ――Remove batteries when the remote control is not to be used for an extended period of time.
16
――If you press the button on the panel key when the product is turned on, the |
Buttons |
Description |
control menu will be displayed. |
|
|
Select the connected input source.
Control menu
Return
Source |
Move the panel key right to select Source |
in the control menu. When the list of |
|
input sources is displayed, move the panel key left or right to select the desired input |
|
|
source. Next, press the panel key. |
|
|
|
|
|
Display the OSD menu. |
|
Menu |
Move the panel key left to select Menu |
in the control menu. The OSD control |
screen will appear. Move the panel key right to select the desired menu. You can |
select a sub-menu item by moving the panel key up, down, left, or right. To change settings, select the desired menu and press the panel key.
Home
Enter Go to Home mode.
Move the panel key up to select Home in the control menu.
Power off the product.
Power off |
Move the panel key down to select Power off |
in the control menu. Next, press |
the panel key.
Return |
Exit the control menu. |
|
|
17
Reverse Side
――The colour and shape of parts may differ from what is shown. Specifications are subject to change without notice to improve quality.
――Models DB32E, DB40E, DB48E, DB55E and DM32E are only supported.
RS232C IN
RS232C OUT
RGB / DVI /
HDMI / AV /
COMPONENT
AUDIO IN
AUDIO OUT
SD CARD
USB
DVI /
MAGICINFO IN
HDMI IN
RGB IN |
RJ45 |
COMPONENT IN
Port |
Description |
|
|
RS232C IN |
Connects to MDC using an RS232C adapter. |
|
|
RS232C OUT |
|
|
|
RGB / DVI / HDMI / AV / COMPONENT |
Receives sound from a PC via an audio cable. |
AUDIO IN |
|
|
|
AUDIO OUT |
Connects to the audio of a source device. |
|
|
SD CARD |
Connect to an SD memory card. |
|
|
USB |
Connect to a USB memory device. |
|
|
DVI / MAGICINFO IN |
DVI: Connects to a source device using a DVI cable or HDMI-DVI cable. |
|
MAGICINFO IN: Use the (dedicated) DP-DVI cable when connecting a network |
|
box (sold separately). |
|
|
HDMI IN |
Connects to a source device using an HDMI cable. |
|
|
AV IN / COMPONENT IN |
Connects to a source device using the AV/Component adapter. |
|
|
IR / AMBIENT SENSOR IN |
Supplies power to the external sensor board or receives the light sensor signal. |
|
|
RGB IN |
Connects to a source device using a D-SUB cable. |
|
|
RJ45 |
Connects to MDC using a LAN cable. |
|
|
18
Reverse Side
――The colour and shape of parts may differ from what is shown. Specifications are subject to change without notice to improve quality.
――Models DM40E, DM48E and DM55E are only supported.
RS232C IN
RS232C OUT
IR / AMBIENT
SENSOR IN
RGB / DVI /
HDMI / AV /
COMPONENT
AUDIO IN
AUDIO OUT
SD CARD
USB
DVI /
MAGICINFO IN
DP IN
RGB IN |
DP OUT |
HDMI IN 2 |
|
IR |
RJ45 |
COMPONENT IN |
OUT |
||||
|
|
|
|
|
|
HDMI IN 1
Port |
Description |
|
|
RS232C IN |
Connects to MDC using an RS232C adapter. |
|
|
RS232C OUT |
|
|
|
IR / AMBIENT SENSOR IN |
Supplies power to the external sensor board or receives the light sensor signal. |
|
|
RGB / DVI / HDMI / AV / COMPONENT |
Receives sound from a PC via an audio cable. |
AUDIO IN |
|
|
|
AUDIO OUT |
Connects to the audio of a source device. |
|
|
SD CARD |
Connect to an SD memory card. |
|
|
USB |
Connect to a USB memory device. |
|
|
DVI / MAGICINFO IN |
DVI: Connects to a source device using a DVI cable or HDMI-DVI cable. |
|
MAGICINFO IN: Use the (dedicated) DP-DVI cable when connecting a network |
|
box (sold separately). |
|
|
DP IN |
Connects to a PC using a DP cable. |
|
|
HDMI IN 1 / HDMI IN 2 |
Connects to a source device using an HDMI cable. |
|
|
RGB IN |
Connects to a source device using a D-SUB cable. |
|
|
DP OUT |
Connects to another product using a DP cable. |
|
|
AV IN / COMPONENT IN |
Connects to a source device using the AV/Component adapter. |
|
|
IR OUT |
Receives the remote control signal via the external sensor board and outputs the |
|
signal via LOOP OUT. |
|
|
RJ45 |
Connects to MDC using a LAN cable. |
|
|
19
Reverse Side
――The colour and shape of parts may differ from what is shown. Specifications are subject to change without notice to improve quality.
――Models DH40E, DH48E and DH55E are only supported.
RS232C IN
RS232C OUT
IR / AMBIENT
SENSOR IN
RGB / DVI /
HDMI / AV /
COMPONENT
AUDIO IN
AUDIO OUT
SD CARD
USB
DVI /
MAGICINFO IN
DP IN
RGB IN |
DP OUT |
|
IR |
RJ45 |
COMPONENT IN |
OUT |
|||
|
|
|
|
|
HDMI IN 1
Port |
Description |
|
|
RS232C IN |
Connects to MDC using an RS232C adapter. |
|
|
RS232C OUT |
|
|
|
IR / AMBIENT SENSOR IN |
Supplies power to the external sensor board or receives the light sensor signal. |
|
|
RGB / DVI / HDMI / AV / COMPONENT |
Receives sound from a PC via an audio cable. |
AUDIO IN |
|
|
|
AUDIO OUT |
Connects to the audio of a source device. |
|
|
SD CARD |
Connect to an SD memory card. |
|
|
USB |
Connect to a USB memory device. |
|
|
DVI / MAGICINFO IN |
DVI: Connects to a source device using a DVI cable or HDMI-DVI cable. |
|
MAGICINFO IN: Use the (dedicated) DP-DVI cable when connecting a network |
|
box (sold separately). |
|
|
DP IN |
Connects to a PC using a DP cable. |
|
|
HDMI IN 1 |
Connects to a source device using an HDMI cable. |
|
|
RGB IN |
Connects to a source device using a D-SUB cable. |
|
|
DP OUT |
Connects to another product using a DP cable. |
|
|
AV IN / COMPONENT IN |
Connects to a source device using the AV/Component adapter. |
|
|
IR OUT |
Receives the remote control signal via the external sensor board and outputs the |
|
signal via LOOP OUT. |
|
|
RJ45 |
Connects to MDC using a LAN cable. |
|
|
20
Plug In Module (Sold separately)
PIM Slot
To use Plug In Module, make sure you connect a Samsung PIM (sold separately).
To connect a device made by another manufacturer, ensure the device is compatible with Open Pluggable Specification (OPS) standards.
――For details on how to connect a device, refer to the user manual provided with the PIM upon purchase.
――To obtain optimum audio quality, configure the HDMI audio settings using the Windows Control Panel on the OPS device. For products made by other manufacturers, this only applies to HDMI compatible devices.
――To enable sound output from the product with an OPS device that does not support HDMI, configure the analogue audio settings using the Windows Control Panel, go to Plug In Module > Edit Name and set the input source to PC, DVI PC or DVI.
――DHE models are only supported.
Anti-theft Lock
――An anti-theft lock allows you to use the product securely even in public places.
――The locking device shape and locking method depend on the manufacturer. Refer to the user guide provided with your anti-theft locking device for details.
――The following images are for reference only. Real-life situations may differ from what is shown in the images.
To lock an anti-theft locking device:
|
|
|
|
|
|
1 |
Fix the cable of your anti-theft locking device to a heavy object such as a desk. |
|
2 |
Put one end of the cable through the loop on the other end. |
|
3 |
Insert the locking device into the anti-theft lock slot at the back of the product. |
|
4 |
Lock the locking device. |
|
|
-- An anti-theft locking device can be purchased separately. |
|
|
-- Refer to the user guide provided with your anti-theft locking device for details. |
|
|
-- Anti-theft locking devices can be purchased at electronics retailers or online. |
21
Spacer logo
Do not pull on the spacer logo using force. The logo may tear or break off.
22
Remote Control
――Using other display devices in the same space as the remote control of this product can cause the other display devices to be inadvertently controlled. ――A button without a description in the image below is not supported on the product.
Power on the product. |
|
POWER |
|
|
OFF |
||
|
|
||
.QZ |
ABC |
DEF |
|
1 |
2 |
3 |
|
GHI |
JKL |
MNO |
|
4 |
5 |
6 |
|
PRS |
TUV |
WXY |
|
7 |
8 |
9 |
|
DEL-/-- |
SYMBOL |
|
|
0 |
CH LIST |
||
|
|||
|
|
||
Adjust the volume. |
MUTE |
|
Power off the product.
Number buttons
Enter the password in the OSD menu.
Mute the sound.
Unmuting the sound: Press MUTE again or press the volume control(+ VOL -) button.
Change the input source. |
VOL |
SOURCE |
CH |
|
|
||
Display or hide the onscreen display menu, or |
MENU |
HOME |
MagicInfo |
return to the previous menu. |
|
||
|
|
Player I |
|
|
|
|
Use this hotkey to directly access MagicInfo. This hotkey is available when a network box or PIM (Plug In Module) is connected.
Go to Home Launch Button.
-- Remote control button functions may differ for different products.
23
Quickly select frequently used functions. |
TOOLS |
INFO |
|
|
Return to the previous menu. |
RETURN |
|
|
EXIT |
|
|
|
|
|
|
PC |
DVI |
HDMI |
DP |
It sets safe lock function. |
A |
B |
C |
D |
IR control |
|
|
||
|
|
|
||
If multiple products are connected through the |
SET |
UNSET |
LOCK |
|
Video Wall feature, press the SET button and |
|
|
|
|
enter a product ID using the number buttons. |
|
|
|
|
Control the product using the remote control. |
|
|
|
|
Cancel a value that has been set using the |
|
|
|
|
SET button and control all connected products |
|
|
|
|
using the remote control. |
|
|
|
|
To place batteries in the remote control
Display information about the current input source.
Move to the upper, lower, left or right menu, or adjust an option's setting.
Confirm a menu selection.
Exit the current menu.
Manually select a connected input source from
PC, DVI, HDMI or DisplayPort.
――The DP button is not available with the DBE and DM32E models.
Used in Anynet+ mode and multimedia mode.
-- Remote control button functions may differ for different products.
24
Connection Using an IR Stereo Cable (sold |
|
1 |
2 |
separately) |
|
|
|
――The DBE and DM32E models do not support the IR OUT port. |
|
|
|
Make sure to connect the External ambient sensor while the product is powered |
|
|
|
off. Then, power on the product. |
IR OUT |
|
IR / AMBIENT |
|
|
SENSOR IN
Controlling more than one display product using your remote control
•• Connect the IR OUT port on the product to the IR / AMBIENT SENSOR IN port on the other display product using the dedicated stereo cable.
•• A command sent from the remote control pointed at product 1 will be received by both display products 1 and 2 .
――The appearance may differ depending on the product.
Controlling more than one display product using an External ambient sensor (sold separately)
•• A command sent from the remote control pointed at product 1 (to which the External ambient sensor is connected) will be received by both display products 1 and 2 .
――The appearance may differ depending on the product.
1 |
2 |
IR / AMBIENT |
|
SENSOR IN |
IR / AMBIENT |
IR OUT |
|
|
SENSOR IN |
POWER
SOURCE
25
Before Installing the Product
(Installation Guide)
15 ˚
A
B
Figure 1.1 Side view
To prevent injury, this apparatus must be securely attached to the floor/wall in accordance with the installation instructions.
•• Ensure that an authorized installation company installs the wall mount.
•• Otherwise, it may fall and cause personal injury.
•• Make sure to install the specified wall mount.
Tilting Angle and Rotation
――Contact Samsung Customer Service Centre for further details.
•• The product can be tilted at a maximum angle of 15 from a perpendicular wall surface.
•• To use the product vertically (portrait), turn it clockwise so that the LED is pointing down.
Ventilation
Installation on a Perpendicular Wall
A Minimum 40 mm
B Ambient temperature: Under 35C
•• When installing the product on a perpendicular wall, allow at least 40 mm of space between the product and wall surface for ventilation and ensure that the ambient A temperature is kept below 35C.
26
B |
A
C
E |
Figure 1.2 Side view
Figure 1.3 Side view
D D
Installation on an Indented Wall
――Contact Samsung Customer Service Centre for further details.
Plane view
A Minimum 40 mm B Minimum 70 mm C Minimum 50 mm D Minimum 50 mm
E Ambient temperature: Under 35C
――When installing the product on an indented wall, allow at least the space specified above between the product and wall for ventilation and ensure that the ambient temperature is kept below 35C.
27
Dimensions
|
|
|
|
|
Unit: mm (inches) |
Model name |
1 |
2 |
3 |
4 |
5 |
|
5 |
DB32E / DM32E |
721.4 (28.40) |
700.4 (27.57) |
394.8 (15.54) |
420.3 (16.55) |
49.9 (1.96) |
|
1 |
DB40E / DM40E |
906.6 (35.69) |
887.6 (34.94) |
500.2 (19.69) |
524.7 (20.66) |
49.9 (1.96) |
|
|
||||||
2 |
4 |
DB48E / DM48E |
1075.1 (42.33) |
1056.1 (41.58) |
594.9 (23.42) |
619.4 (24.39) |
49.9 (1.96) |
|
|
|
|
|
|
|
|
|
|
DB55E / DM55E |
1230.6 (48.45) |
1211.6 (47.70) |
682.4 (26.87) |
706.9 (27.83) |
49.9 (1.96) |
|
3 |
|
|
|
|
|
|
|
|
DH40E |
913.2 (35.95) |
886.6 (34.91) |
499.2 (19.65) |
531.3 (20.92) |
52.4 (2.06) |
|
|
DH48E |
1081.7 (42.59) |
1055.1 (41.54) |
593.9 (23.38) |
626 (24.65) |
52.4 (2.06) |
|
|
DH55E |
1237.2 (48.71) |
1210.6 (47.66) |
681.4 (26.83) |
713.5 (28.09) |
52.4 (2.06) |
――All drawings are not necessarily to scale. Some dimensions are subject to change without prior notice.
Refer to the dimensions prior to performing installation of your product. Not responsible for typographical or printed errors.
28
Using the COVER-JACK
To prevent theft of the SD memory card or any other USB device, install the COVER-JACK.
――The following images are for reference only. Real-life situations may differ from what is shown in the images.
――When using a DVI cable, make sure to cut off the side of the COVER-JACK first. ――Cut out the Cover-Jack according to the DVI cable size before use.
29
Installing the Wall Mount
Installing the Wall Mount
The wall mount kit (sold separately) allows you to mount the product on the wall.
For detailed information on installing the wall mount, see the instructions provided with the wall mount. We recommend you contact a technician for assistance when installing the wall mount bracket.
Samsung Electronics is not responsible for any damage to the product or injury to yourself or others if you elect to install the wall mount on your own.
Wall Mount Kit Specifications (VESA)
――Install your wall mount on a solid wall perpendicular to the floor. Before attaching the wall mount to surfaces other than plaster board, please contact your nearest dealer for additional information.
If you install the product on a slanted wall, it may fall and result in severe personal injury.
•• Samsung wall mount kits contain a detailed installation manual and all parts necessary for assembly are provided.
•• Do not use screws that are longer than the standard length or do not comply with the VESA standard screw specifications. Screws that are too long may cause damage to the inside of the product.
•• For wall mounts that do not comply with the VESA standard screw specifications, the length of the screws may differ depending on the wall mount specifications.
•• Do not fasten the screws too firmly. This may damage the product or cause the product to fall, leading to personal injury. Samsung is not liable for these kinds of accidents.
•• Samsung is not liable for product damage or personal injury when a non-VESA or non-specified wall mount is used or the consumer fails to follow the product installation instructions.
•• Do not mount the product at more than a 15 degree tilt.
•• Always have two people mount the product on a wall.
•• Standard dimensions for wall mount kits are shown in the table below.
30