NEC PS9513, PS9513L1, PS9513L2, PS9513L3 DATA SHEET
DATA SHEET
PHOTOCOUPLER
PS9513,PS9513L1,PS9513L2,PS9513L3
1 Mbps, OPEN COLLECTOR OUTPUT, FOR GATE DRIVE INTERFACE
INTELLIGENT POWER MODULE
8 mm CREEPAGE 8-PIN DIP HIGH-SPEED PHOTOCOUPLER
DESCRIPTION
The PS9513, PS9513L1, PS9513L2 and PS9513L3 are optically coupled isolators containing a GaAlAs LED on the
input side and a photo diode and a signal processing circuit on the output side on one chip.
The PS9513 is designed specifically for high common mode transient immunity (CMR) and low pulse width
distortion with operating temperature. It is suitable for IPM drive.
The PS9513L1 is lead bending type for long creepage distance.
The PS9513L2 is lead bending type for long creepage distance (Gull-wing) for surface mount.
The PS9513L3 is lead bending type (Gull-wing) for surface mounting.
FEATURES
• Long creepage distance (8 mm MIN. : PS9513L1, PS9513L2)
• High common mode transient immunity (CM
• High-speed response (t
• Maximum propagation delays (t
• Pulse width distortion ( | t
PHL = 500 ns MAX., tPLH = 750 ns MAX.)
PLH − tPHL = 270 ns TYP.)
PHL − tPLH | = 270 ns TYP.)
H, CML = ±15 kV/
μ
s MIN.)
• Open collector output
• Ordering number of tape product : PS9513L2-E3 : 1 000 pcs/reel
: PS9513L3-E3 : 1 000 pcs/reel
• Pb-Free product
• Safety standards
• UL approved: File No. E72422
• CSA approved: No. CA 101391
• BSI approved: No. 8937, 8938
• SEMKO approved: No. 615433
• NEMKO approved: No. P06207243
• DEMKO approved: No. 314091
• FIMKO approved: No. FI 22827
• DIN EN60747-5-2 (VDE0884 Part2) approved (Option)
APPLICATIONS
• IPM Driver
• General purpose inverter
PIN CONNECTIONS
(Top View)
8
7
243
1
5
6
−NEPOC Series−
1. NC
2. Anode
3. Cathode
4. NC
5. GND
6. V
O
7. NC
8. V
CC
The information in this document is subject to change without notice. Before using this document, please
confirm that this is the latest version.
Not all products and/or types are available in every country. Please check with an NEC Electronics
sales representative for availability and additional information.
Document No. PN10679EJ02V0DS (2nd edition)
Date Published August 2008 NS
Printed in Japan
The revised points can be easily searched by copying an "<R>" in the PDF file and specifying it in the "Find what:" field.
The mark <R> shows major revised points.
2007, 2008
PACKAGE DIMENSIONS (UNIT: mm)
DIP Type
+0.5
9.25
–0.25
PS9513,PS9513L1,PS9513L2 PS9513L3
PS9513
+0.4
1.01
–0.2
3.5±0.2
0.5±0.15
2.54
Lead Bending Type (Gull-wing) For Surface Mount
PS9513L3
9.25
+0.5
–0.25
7.62
6.5
0 to 15˚
+0.5
–0.1
2
3.5±0.2
0.5±0.15
1.01
+0.4
–0.2
2.54
0.635±0.15
0.74±0.25
Data Sheet PN10679EJ02V0DS
9.65±0.4
+0.5
6.5
–0.1
PS9513,PS9513L1,PS9513L2 PS9513L3
Lead Bending Type For Long Creepage Distance
PS9513L1
+0.5
9.25
–0.25
+0.4
1.01
–0.2
3.5±0.2
10.16
6.5
+0.5
–0.1
0.5±0.15
2.54
0 to 15˚
Lead Bending Type For Long Creepage Distance (Gull-wing) For Surface Mount
PS9513L2
11.8±0.4
+0.5
6.5
–0.1
9.25
+0.5
–0.25
1.01
+0.4
–0.2
3.5±0.2
0.5±0.15
2.54
0.25±0.2
0.9±0.25
Data Sheet PN10679EJ02V0DS
3
PS9513,PS9513L1,PS9513L2 PS9513L3
FUNCTIONAL DIAGRAM
8
2
6
3
5
Shield
<R>
LED
ON L
OFF
MARKING EXAMPLE
No. 1 pin
Mark
N 831
N
Output
H
9513
8
31
Year Assembled
(Last 1 Digit)
In-house Code
(L or T)
Rank Code
Type Number
Assembly Lot
Week Assembled
PHOTOCOUPLER CONSTRUCTION
Parameter PS9513, PS9513L3 PS9513L1, PS9513L2
Air Distance (MIN.) 7 mm 8 mm
Outer Creepage Distance (MIN.) 7 mm 8 mm
Isolation Distance (MIN.) 0.4 mm 0.4 mm
4
Data Sheet PN10679EJ02V0DS
PS9513,PS9513L1,PS9513L2 PS9513L3
ORDERING INFORMATION
Part Number Order Number Solder Plating
Specification
PS9513 PS9513-AX Pb-Free Magazine case 50 pcs Standard products PS9513
PS9513L1 PS9513L1-AX (Ni/Pd/Au) (UL, CSA, BSI, PS9513L1
PS9513L2 PS9513L2-AX SEMKO, NEMKO, PS9513L2
PS9513L3 PS9513L3-AX DEMKO, FIMKO PS9513L3
PS9513L2-E3 PS9513L2-E3-AX Embossed Tape 1 000 pcs/reel approved) PS9513L2
PS9513L3-E3 PS9513L3-E3-AX PS9513L3
PS9513-V PS9513-V-AX Magazine case 50 pcs DIN EN60747-5-2 PS9513
PS9513L1-V PS9513L1-V-AX (VDE0884 Part2) PS9513L1
PS9513L2-V PS9513L2-V-AX Approved (Option) PS9513L2
PS9513L3-V PS9513L3-V-AX PS9513L3
PS9513L2-V-E3 PS9513L2-V-E3-AX
PS9513L3-V-E3 PS9513L3-V-E3-AX PS9513L3
Embossed Tape 1 000 pcs/reel PS9513L2
*1 For the application of the Safety Standard, following part number should be used.
Packing Style Safety Standard
Approval
Application Part
Number*
1
Data Sheet PN10679EJ02V0DS
5
PS9513,PS9513L1,PS9513L2 PS9513L3
ABSOLUTE MAXIMUM RATINGS (TA = 25°C, unless otherwise specified)
Parameter Symbol Ratings Unit
Diode Forward Current
Reverse Voltage VR 5.0 V
Detector
Output Voltage VO −0.5 to +35 V
Output Current IO 15 mA
Power Dissipation
Isolation Voltage
Operating Ambient Temperature TA −40 to +100 °C
Storage Temperature Tstg −55 to +125 °C
Supply Voltage VCC −0.5 to +35 V
*3
BV 5 000 Vr.m.s.
*1 Reduced to 0.33 mA/°C at T
*2 Reduced to 2.0 mW/°C at T
*3 AC voltage for 1 minute at T
Pins 1-4 shorted together, 5-8 shorted together.
RECOMMENDED OPERATING CONDITIONS
Parameter Symbol MIN. TYP. MAX. Unit
*1
IF 25 mA
*2
PC 100 mW
A = 70°C or more.
A = 70°C or more.
A = 25°C, RH = 60% between input and output.
Forward Current IF 10 20 mA
Output Voltage VO 0 30 V
Supply Voltage VCC 4.5 15 30 V
Input Voltage VF 0 0.8 V
6
Data Sheet PN10679EJ02V0DS
Loading...