DATA SHEET
PHOTOCOUPLER
PS9611,PS9611L
HIGH NOISE REDUCTION/HIGH-SPEED 10 Mbps, TOTEM-POLE OUTPUT TYPE
8-PIN DIP PHOTOCOUPLER
-NEPOCTM Series-
DESCRIPTION
The PS9611 and PS9611L are optically coupled high-speed, totem-pole output isolators containing a GaAlAs LED on light emitting diode (input side) and a photodiode and a signal processing circuit on light receiving side (output side) on one chip.
The PS9611 is in a plastic DIP (Dual In-line Package) and the PS9611L is lead bending type (Gull-wing) for surface mounting.
FEATURES
•High common mode transient immunity (CMH, CML = ±10 kV/μs TYP.)
•High-speed response (tPHL, tPLH = 30 ns TYP.)
•Pulse width distortion (½tPHL - tPLH½ = 3 ns TYP.)
•Totem-pole output (No pull-up resistor required)
•Ordering number of taping product: PS9611L-E3, E4: 1 000 pcs/reel
APPLICATIONS
•Computer and peripheral manufactures
•Measurement equipment
•PDP
The information in this document is subject to change without notice. Before using this document, please confirm that this is the latest version.
Not all devices/types available in every country. Please check with local NEC representative for availability and additional information.
Document No. P13102EJ3V0DS00 (3rd edition) |
The mark • shows major revised points. |
|
|
Date Published February 2000 NS CP(K) |
© |
|
1997, 2000 |
Printed in Japan |
|
||
|
|
|
PS9611,PS9611L
PACKAGE DIMENSIONS (in millimeters)
PS9611
10.16 MAX.
4.55 MAX. |
3.8 MAX. |
|
2.8 MIN. |
0.65 |
|
|
0.5±0.1 |
2.54 |
|
0.25 M |
|
|
1.25±0.15 |
|
|
|
TOP VIEW
8 |
7 |
|
|
6 |
|
5 |
|
|
1. NC |
||||
|
|
|
|
|
|
|
|
|
|
|
|
||
|
|
|
|
|
|
|
|
|
|
|
2. |
Anode |
|
|
|
|
|
|
|
|
|
|
|
|
3. |
Cathode |
|
|
|
|
|
|
|
|
|
|
|
|
|||
|
|
|
|
|
|
|
|
|
|
|
|
4. NC |
|
|
|
|
|
|
|
|
|
|
|
|
|
||
|
|
|
|
|
|
|
|
|
|
|
|
5. GND |
|
|
|
|
|
|
|
|
|
|
|
|
6. |
VO |
|
|
|
|
|
|
|
|
|
|
|
|
|||
|
|
|
|
|
|
|
|
|
|
|
|||
|
|
|
|
|
|
|
|
|
|
|
|
7. NC |
|
|
|
|
|
|
|
|
|
|
|
|
8. |
VCC |
|
1 |
2 |
|
|
3 |
|
4 |
|
||||||
|
|
|
|
|
|
|
|||||||
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
7.62 |
|
|
|
|
|
||
|
|
|
|
|
|
6.5 |
|
|
|
|
|
||
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
0 to 15˚
PS9611L
10.16 MAX. |
|
|
|
|
TOP VIEW |
|
|
||||||||||||
|
8 |
7 |
6 |
5 |
|
1. NC |
|||||||||||||
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
||
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
2. |
Anode |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
||
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
3. |
Cathode |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
4. NC |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
5. GND |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
6. |
VO |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
||
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
||
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
7. NC |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
8. |
VCC |
1 |
2 |
3 |
4 |
|
|||||||||||||||
|
|
|
|
|
6.5 |
3.8 MAX. |
|
|
|
|
0.9±0.25 |
1.25±0.15 |
2.54 |
9.60±0.4 |
0.25 M |
|
|
0.05 to 0.2
2 |
Data Sheet P13102EJ3V0DS00 |
PS9611,PS9611L
INTERNAL OUT PUT CIRCUIT
VCC (8)
Vo (6)
GND (5)
LED |
Output |
|
|
ON |
L |
|
|
OFF |
H |
|
|
Data Sheet P13102EJ3V0DS00 |
3 |
PS9611,PS9611L
ORDERING INFORMATION
Part Number |
Package |
Packing Style |
Application Part Number*1 |
|
|
|
|
PS9611 |
8-pin DIP |
Magazine case 50 pcs |
PS9611 |
|
|
|
|
PS9611L |
|
|
PS9611L |
|
|
|
|
PS9611L-E3 |
|
Embossed Tape 1 000 pcs/reel |
|
|
|
|
|
PS9611L-E4 |
|
|
|
|
|
|
|
*1 For the application of the Safety Standard, following part number should be used.
ABSOLUTE MAXIMUM RATINGS (TA = 25 °C, unless otherwise specified)
|
Parameter |
Symbol |
Ratings |
Unit |
|
|
|
|
|
Diode |
Forward Current |
IF |
30 |
mA |
|
|
|
|
|
|
Reverse Voltage |
VR |
3.0 |
V |
|
|
|
|
|
Detector |
Supply Voltage |
VCC |
7 |
V |
|
|
|
|
|
|
Output Voltage |
VO |
7 |
V |
|
|
|
|
|
|
High Level Output Current *1 |
IOH |
−5 |
mA |
|
|
|
|
|
|
Low Level Output Current *1 |
IOL |
25 |
mA |
|
|
|
|
|
|
Power Dissipation *1 |
PC |
150 |
mW |
|
|
|
|
|
Isolation Voltage *2 |
BV |
3 750 |
Vr.m.s. |
|
|
|
|
|
|
Operating Ambient Temperature |
TA |
−40 to +85 |
°C |
|
|
|
|
|
|
Storage Temperature |
Tstg |
−55 to +125 |
°C |
|
|
|
|
|
|
*1 TA = −40 to +85 °C
*2 AC voltage for 1 minute at TA = 25 °C, RH = 60 % between input and output.
RECOMMENDED OPERATING CONDITIONS
Parameter |
Symbol |
MIN. |
TYP. |
MAX. |
Unit |
|
|
|
|
|
|
High Level Input Current |
IFH |
7.5 |
|
12.5 |
mA |
|
|
|
|
|
|
Low Level Input Current |
IFL |
0 |
|
250 |
μA |
|
|
|
|
|
|
Supply Voltage |
VCC |
4.5 |
5.0 |
5.5 |
V |
|
|
|
|
|
|
TTL (loads) |
N |
|
|
5 |
|
|
|
|
|
|
|
4 |
Data Sheet P13102EJ3V0DS00 |