MTS Fabric-1000 kN User Manual

Trademark

trademark of MTS Systems Corporation within the United States. These trademarks may be protected in other countries.

Contact

Specif

information

cat

ions

2010 MTS

MTS is a registered trademark and MTS Fundamental is a

MTS

http

ISO 9001 Certified QM

Systems

Systems Corporation

://www.m

ts.com/en/Global

Corporation.

/index.asp

All

rights reserved.

Shear Fixture for Welded Fabric

300 kN/600 kN/1000 kN

Maximum Load (kN)

Fixture Body Height (mm)

Fixture Body Width (mm)

Fixture Body Depth (mm)

Fixture Body Weight (kg)

Temperature Range (°C)

Saline Tolerant

Immersion Proof

Model

Specimen

F-JJW305A1 F-JJW605A1 F-JJW106A1 300 600 1000 305 58 58

4.95 Welded Wire Fabric 0 to +50 No No

MTS

Accessories

Fundamental

™

http://support.mts.com

100-230-743

②④③

①

≤300 kN F-JJW305A1 ≤600 kN F-JJW605A1 ≤1000 kN F-JJW106A1

③Welded Wire Fabric

Vertical

Wire

(mm)

16 12 12~16 12~16 14 11 12 10 11 9 8~12 9~11 10 8

9 7 8 6 5~8 5~8 7 5 6 5

Horizontal

(mm)

Wire

④

guiding

block (mm)

②

orientation

block (mm)

Follow these steps before using :

1. According to specification marker choose ④oriented pieces and then according to drawing assembly.

2. Into ③Welded Wire Fabric

3. According to the figure, and use choice ②orientation block matching V slot for sample positioning.

4. With ①press block compaction orientation block, then adjust orientation block and sample contact ,

5. According to the figure by tensile test.