LG 32LN5100-TA Owner’s Manual

OWNER’S MANUAL

LED TV

*LG LED TV applies LCD screen with LED backlights.

Please read this manual carefully before operating your set and retain it for future reference.

LN510*

LN511*

LN512*

LN513*

LN515*

P/NO : MFL67710803 (1301-REV00)	www.lg.com
Printed in Korea

<![if ! IE]>

<![endif]>ENGLISH

2TABLE OF CONTENTS

TABLE OF CONTENTS

3SAFETY INSTRUCTIONS

8INSTALLATION PROCEDURE

8ASSEMBLING AND PREPARING

8Unpacking

10Parts and buttons

11Lifting and moving the TV

12Setting up the TV

12- Attaching the stand

13Mounting on a table

15Mounting on a wall

16- Attaching the shelf stand

17- How to attach to masonry walls

18Tidying cables

19MAKING CONNECTIONS

19Antenna connection

20HDMI connection

20Component connection

21Composite connection

21USB connection

22Audio System connection

22- External Stereo Connection

23REMOTE CONTROL

24WATCHING TV

24Turning the TV on for the first time

24Watching TV

24Managing programmes

24- Automatically setting up programme

25- Manually setting up programme

26- Editing your programme list

26- Selecting a programme on the programme list

26Using additional options

26- Adjusting aspect ratio

27- Using the input list

28ENTERTAINMENT

28Connecting USB storage devices

29Browsing files

30Viewing photos

31Listening to music

32Viewing movies

34 DivX® VOD Guide

35 CUSTOMIZING TV SETTING

35Accessing main menus

35Customizing Settings

35- SETUP Settings

36- PICTURE Settings

38- AUDIO Settings

39- TIME Settings

40- OPTION Settings

40- LOCK Settings

41 TELETEXT

41 Switch On/Off

41 Simple Text

41 - Page selection

41- Programming a colour button in LIST mode

41	Fastext
41	- Page selection

41Special Teletext Function

42MAINTENANCE

42 Cleaning your TV

42 - Screen, frame, cabinet and stand

42 - Power cord

42TROUBLESHOOTING

43SPECIFICATIONS

46 LICENSES

WARNING

yy If you ignore the warning message, you may be seriously injured or there is a possibility of accident or death.

CAUTION

yy If you ignore the caution message, you may be slightly injured or the product may be damaged.

NOTE

yy The note helps you understand and use the product safely. Please read the note carefully before using the product.

SAFETY INSTRUCTIONS

3

SAFETY INSTRUCTIONS

Please read these safety precautions carefully before using the product.

WARNING

yyDo not place the TV and remote control in the following environments:

--A location exposed to direct sunlight

--An area with high humidity such as a bathroom

--Near any heat source such as stoves and other devices that produce heat

--Near kitchen counters or humidifiers where they can easily be exposed to steam or oil

--An area exposed to rain or wind

--Near containers of water such as vases

Otherwise, this may result in fire, electric shock, malfunction or product deformation.

yyDo not place the product where it might be exposed to dust.

This may cause a fire hazard.

yyMains Plug is the TV connecting/

disconnecting device to AC mains electric supply. This plug must remain readily attached and operable when TV is in use.

yyDo not touch the power plug with wet hands. Additionally, if the cord pin is wet or covered with dust, dry the power plug completely or wipe dust off.

You may be electrocuted due to excess moisture.

yyMake sure to connect Mains cable to compliant AC mains socket with Grounded earth pin. (Except for devices which are not grounded

on earth.) Otherwise possibility you may be electrocuted or injured.

yyInsert power cable plug completely into wall socket otherwise if not secured completely into socket, fire ignition may break out.

yyEnsure the power cord does not come into contact with hot objects such as a heater. This may cause a fire or an electric shock hazard.

yyDo not place a heavy object, or the product itself, on power cables.

Otherwise, this may result in fire or electric shock.

yyBend antenna cable between inside and outside building to prevent rain from flowing in.

This may cause water damaged inside the Product and could give an electric shock.

yyWhen mounting TV onto wall make sure to neatly install and isolate cabling from rear of TV as to not create possibility of electric shock / fire hazard.

yyDo not plug too many electrical devices into a single multiple electrical outlet.

Otherwise, this may result in fire due to over-heating.

yyDo not drop the product or let it fall over when

connecting external devices. Otherwise, this may result in injury or damage to the product.

<![if ! IE]>

<![endif]>ENGLISH

<![if ! IE]>

<![endif]>ENGLISH

4SAFETY INSTRUCTIONS

yyKeep the packing antimoisture material or vinyl packing out of the reach of children.

Anti-moisture material is harmful if swallowed. If swallowed by mistake, force the patient to vomit and visit the nearest hospital.

Additionally, vinyl packing can cause suffocation. Keep it out of the reach of children.

yyDo not let your children climb or cling onto the TV.

Otherwise, the TV may fall over, which may cause serious injury.

yyDispose of used batteries carefully to protect a child from eating them.

Please seek DoctorMedical

Attention immediately if child consumes batteries.

yyDo not insert any metal objects/conductors (like a metal chopstick/cutlery/

screwdriver) between power cable plug and input Wall

Socket while it is connected to the input terminal on the wall. Additionally, do not touch the power cable right after plugging into the wall input terminal.

You may be electrocuted. (Depending on model)

yyDo not put or store inflammable substances near the product. There is a danger of combustion/ explosion or fire due to careless handling of the inflammable substances.

yyDo not drop metallic objects such as coins, hair pins, chopsticks or wire into the product, or inflammable objects such as paper and matches. Children must pay particular attention.

Electrical shock, fire or injury can occur. If a foreign object is dropped into the product, unplug the power cord and contact the service centre.

yyDo not spray water on the product or scrub with an inflammable substance

(thinner or benzene). Fire or electric shock accident can occur.

yyDo not allow any impact, shock or any objects to fall into the unit, and do not drop anything onto the screen.

You may be injured or the product can be damaged.

yyNever touch this product or antenna during a thunder or lighting storm.

You may be electrocuted.

yyNever touch the wall outlet when there is leakage of gas, open the windows and ventilate.

It may cause a fire or a burn by a spark.

yyDo not disassemble, repair or modify the product at your own discretion.

Fire or electric shock accident can occur.

Contact the service centre for check, calibration or repair.

yyIf any of the following occur, unplug the product immediately and contact your local service centre. --The product has been

impacted by shock --The product has been

damaged

--Foreign objects have entered the product --The product produced

smoke or a strange smell

This may result in fire or electric shock.

		SAFETY INSTRUCTIONS	5
yyUnplug the TV from AC		yyWhen installing the antenna,
mains wall socket if you do		consult with a qualified
not intend to use the TV		service technician. If not
for a long period of time.		installed by a qualified
Accumulated dust can cause		technician, this may create
fire hazard and insulation		a fire hazard or an electric
deterioration can cause		shock hazard.
electric leakage/shock/fire.		yyWe recommend that you
yyApparatus shall not be		maintain a distance of
exposed to dripping or		at least 2 to 7 times the
splashing and no objects		diagonal screen size when
filled with liquids, such as		watching TV.
vases, shall be placed on		If you watch TV for a long
the apparatus.		period of time, this may
		cause blurred vision.
		yyOnly use the specified type
		of battery.
CAUTION		This could cause damage to
		the remote control.
yyInstall the product where no		yyDo not mix new batteries
radio wave occurs.
		with old batteries.
		This may cause the batteries
yyThere should be enough		to overheat and leak.
	yyBatteries should not be exposed to excessive
distance between an outside
	heat.eg	keep away from direct Sunlight, open
antenna and power lines
	fireplace and electric heaters.
to keep the former from
	yyDo not place non-rechargeable batteries in
touching the latter even
	charging device.
when the antenna falls.
		yyMake sure there are no
This may cause an electric
shock.		objects between the remote
yyDo not install the product		control and its sensor.
on places such as unstable
shelves or inclined surfaces.		yySignal from Remote Control
Also avoid places where		can be interrupted due to
there is vibration or where		external/internal lighting eg
the product cannot be fully		Sunlight, fluorescent lighting.
supported.		If this occurs turn off lighting
Otherwise, the product may		or darken viewing area.
fall or flip over, which may		yyWhen connecting external
cause injury or damage to
		devices such as video game
the product.
		consoles, make sure the
yyIf you install the TV on a
		connecting cables are long
stand, you need to take		enough.
actions to prevent the		Otherwise, the product
product from overturning.		may fall over, which may
Otherwise, the product may		cause injury or damage the
fall over, which may cause		product.
injury.		yyDo not turn the product
yyIf you intend to mount the product to a wall,
		On/Off by plugging-in or
attach VESA standard mounting interface		unplugging the power plug to
(optional parts) to the back of the product. When		the wall outlet. (Do not use
you install the set to use the wall mounting		the power plug for switch.)
bracket (optional parts), fix it carefully so as not		It may cause mechanical
to drop.		failure or could give an
yyOnly use the attachments / accessories		electric shock.
specified by the manufacturer.

<![if ! IE]>

<![endif]>ENGLISH

<![if ! IE]>

<![endif]>ENGLISH

6SAFETY INSTRUCTIONS

	yyPlease follow the installation	yyAvoid touching the screen or
	instructions below to	holding your finger(s) against
	prevent the product from	it for long periods of time.
	overheating.	Doing so may produce some
	--The distance between the	temporary or permanent
	product and the wall should	distortion/damage to screen.
	be more than 10 cm.	yyWhen cleaning the product
	--Do not install the product in
		and its components, unplug
	a place with no ventilation
		the power first and wipe it
	(e.g., on a bookshelf or in
		with a soft cloth. Applying
	a cupboard).
		excessive force may cause
	--Do not install the product
		scratches or discolouration.
	on a carpet or cushion.
		Do not spray with water or
	--Make sure the air vent is
		wipe with a wet cloth. Never
	not blocked by a tablecloth
		use glass cleaner, car or
	or curtain.
		industrial shiner, abrasives
	Otherwise, this may result in
		or wax, benzene, alcohol
	fire.
		etc., which can damage the
	yyTake care not to touch the	product and its panel.
	ventilation openings when	Otherwise, this may result in
	watching the TV for long	fire, electric shock or product
	periods as the ventilation	damage (deformation,
	openings may become hot.	corrosion or breakage).
	This does not affect the	yyAs long as this unit is connected to the AC wall
	operation or performance of	outlet, it is not disconnected from the AC power
	the product.	source even if you turn off this unit by SWITCH.
	yyPeriodically examine the cord of your appliance,	yyWhen unplugging the cable,
	and if its appearance indicates damage or	grab the plug and unplug it,
	deterioration, unplug it, discontinue use of the	by pulling at the plug. Don’t
	appliance, and have the cord replaced with	pull at the cord to unplug the
	an exact replacement part by an authorized	power cord from the power
	servicer.	board, as this could be
	yyPrevent dust collecting on	hazardous.
	the power plug pins or outlet.	yyWhen moving the product,
	This may cause a fire	make sure you turn the
	hazard.	power off first. Then, unplug
	yyProtect the power cord from	the power cables, antenna
		cables and all connecting
	physical or mechanical
		cables.
	abuse, such as being
		The TV set or power cord
	twisted, kinked, pinched,
		may be damaged, which
	closed in a door, or walked
		may create a fire hazard or
	upon. Pay particular
		cause electric shock.
	attention to plugs, wall
		yyWhen moving or unpacking
	outlets, and the point where
	the cord exits the appliance.	the product, work in pairs
	yyDo not press strongly upon	because the product is
		heavy.
	the panel with a hand or
		Otherwise, this may result in
	sharp object such as nail,
		injury.
	pencil or pen, or make a
	scratch on it, as it may
	cause damage to screen.

SAFETY INSTRUCTIONS

7

yyContact the service centre once a year to clean the internal parts of the product.

Accumulated dust can cause mechanical failure.

yyRefer all servicing to qualified service personnel. Servicing is required when the apparatus has been damaged in any way, such as power supply cord or plug is damaged, liquid has been spilled or objects have fallen into the apparatus, the apparatus has been exposed to rain or moisture, does not operate normally, or has been dropped.

yyIf the product feels cold to the touch, there may be a small “flicker” when it is turned on. This is normal, there is nothing wrong with product.

yyThe panel is a high technology display product with resolution of two million to six million pixels. You may see tiny black dots and/ or brightly coloured dots

(red, blue or green) at a size of 1 ppm on the panel. This does not indicate a malfunction and does not affect the performance and reliability of the product. This phenomenon also occurs in third-party products and is not subject to exchange or refund.

yyYou may find different brightness and colour of the panel depending on your viewing position(left/right/ top/down).

This phenomenon occurs due to the characteristic of the panel. It is not related with the product performance, and it is not malfunction.

yyDisplaying a still image (e.g., broadcasting channel logo, on-screen menu, scene from a video game) for a prolonged time may cause damage to the screen, resulting in retention of the image, which is known as image sticking.

The warranty does not cover the product for image sticking.

Avoid displaying a fixed image on your television’s screen for a prolonged period (2 or more hours for LCD, 1 or more hours for Plasma).

Also, if you watch the TV at a ratio of 4:3 for a long time, image sticking may occur on the borders of the panel.

This phenomenon also occurs in third-party products and is not subject to exchange or refund.

yyGenerated Sound

“Cracking” noise: A cracking noise that occurs when watching or turning off the TV is generated by plastic thermal contraction due to temperature and humidity. This noise is common for products where thermal deformation is required. Electrical circuit humming/panel buzzing: A

low level noise is generated from a high-speed switching circuit, which supplies a large amount of current to operate a product. It varies depending on the product.

This generated sound does not affect the performance and reliability of the product.

<![if ! IE]>

<![endif]>ENGLISH

<![if ! IE]>

<![endif]>ENGLISH

8INSTALLATION PROCEDURE / ASSEMBLING AND PREPARING

NOTE

yy Image shown may differ from your TV.

yy Your TV’s OSD (On Screen Display) may differ slightly from that shown in this manual.

yy The available menus and options may differ from the input source or product model that you are using. yy New features may be added to this TV in the future.

yy The TV can be placed in standby mode in order to reduce the power consumption. And the TV should be turned off if it will not be watched for some time, as this will reduce energy consumption.

yy The energy consumed during use can be significantly reduced if the level of brightness of the picture is reduced, and this will reduce the overall running cost.

INSTALLATION PROCEDURE

1 Open the package and make sure all the accessories are included.

2Attach the stand to the TV set.

3Connect an external device to the TV set.

ASSEMBLING AND PREPARING

Unpacking

Check your product box for the following items. If there are any missing accessories, contact the local dealer where you purchased your product. The illustrations in this manual may differ from the actual product and item.

CAUTION

yy Do not use any unapproved items to ensure the safety and product life span.

yy Any damages or injuries by using unapproved items are not covered by the manufacturer’s warranty. yy Some models have a thin film attached on to the screen and this must not be removed.

NOTE

yy The items supplied with your product may vary depending on the model.

yy Product specifications or contents of this manual may be changed without prior notice due to upgrade of product functions.

yy For an optimal connection, HDMI cables and USB devices should have bezels less than 10 mm thick and 18 mm width. Use an extension cable that supports USB 2.0 if the USB cable or USB memory stick does not fit into your TV’s USB port.

	B	B
		<	10 mm
		*A =
		<	18 mm
A		*B =
		A

ASSEMBLING AND PREPARING

9

<![if ! IE]>

<![endif]>ENGLISH

Remote control and					Owner’s manual		Cable holder		Power Cord
batteries (AAA)							(Depending on model)
(See p.23)							(See p.18)

Stand Screws		Stand Screws		Stand Rack Screws		Desk-mount Screw
3EA, P5 x 25		4EA, P5 x 25		3EA, M4 x 8		1EA
4EA, M4 x 14		4EA, M4 x 14		(Only LN515*)		(See p.13)
(Only LN510*, LN511*,		(Only LN515*)		(See p.16)
LN512*, LN513*)		(See p.12)
(See p.12)

			Wall mount screws		Wall mount anchors		Stand Body /
Wall Plate
(Only LN515*)			3EA, P5 x 69.5		3EA		Stand Base
(See p.16)			(Only LN515*)		(Only LN515*)		(Only LN510*, LN511*,
			(See p.16)		(See p.17)		LN512*, LN513*)
							(See p.12)

Stand Body / Stand Base

(Only LN515*) (See p.12, 16)

<![if ! IE]>

<![endif]>ENGLISH

10 ASSEMBLING AND PREPARING

Parts and buttons

Screen

OK

SETTINGS

INPUT

				Remote control sensor
				Power indicator
				buttons
	Speakers
Button				Description
	Scrolls through the saved programmes.
	Adjusts the volume level.
	Selects the highlighted menu option or confirms an input.

SAccesses the main menu, or saves your input and exits the menus.

Changes the input source.

Turns the power on or off.

	ASSEMBLING AND PREPARING		11
Lifting and moving the TV	yy When transporting a large TV, there should be at
	least 2 people.
Please note the following advice to prevent the
	yy When transporting the TV by hand, hold the TV as
TV from being scratched or damaged and for safe	shown in the following illustration.

transportation regardless of its type and size.

CAUTION

yy Avoid touching the screen at all times, as this may result in damage to the screen.

yy It is recommended to move the TV in the box or packing material that the TV originally came in.

yy Before moving or lifting the TV, disconnect the power cord and all cables.

yy When holding the TV, the screen should face away from you to avoid damage.

yy When transporting the TV, do not expose the TV to jolts or excessive vibration.

yy When transporting the TV, keep the TV upright, never turn the TV on its side or tilt towards the left or right. yy Do not apply excessive pressure to cause flexing / bending of frame chassis as it may damage screen.

yy Hold the top and bottom of the TV frame firmly. Make sure not to hold the transparent part, speaker, or speaker grill area.

<![if ! IE]>

<![endif]>ENGLISH

<![if ! IE]>

<![endif]>ENGLISH

12 ASSEMBLING AND PREPARING

Setting up the TV

Image shown may differ from your TV.

Attaching the stand

LN510*, LN511*, LN512*, LN513*

LN515*

1 1

3EA

Stand Body

P5 x 25

Stand Body

Stand Base

2

	2	Stand Base
		4EA
		P5 x 25

3

3

4

4EA

4EA

M4 x 14

M4 x 14

ASSEMBLING AND PREPARING

13

CAUTION

yy When attaching the stand to the TV set, place the screen facing down on a cushioned table or flat surface to protect the screen from scratches.

yy Make sure that the screws are inserted correctly and fastened securely. (If they are not fastened securely enough, the TV may tilt forward after being installed.)

Do not use too much force and over tighten the screws; otherwise screw may be damaged and not tighten correctly.

NOTE

yy Remove the stand before installing the TV on a wall mount by performing the stand attachment in reverse.

Mounting on a table

1 Lift and tilt the TV into its upright position on a table. -- Leave a 10 cm (minimum) space from the wall

for proper ventilation.

		10 cm
		cm
	10 cm	10
		10 cm

Securing the TV to a table

Fix the TV to a table to prevent from tilting forward, damage, and potential injury.

To secure the TV to a table, insert and tighten the supplied screw on the rear of the stand.

WARNING

yy To prevent TV from falling over, the TV should be securely attached to the floor/wall per installation instructions. Tipping, shaking, or rocking the TV may cause injury.

<![if ! IE]>

<![endif]>ENGLISH

2Connect the power cord to a wall outlet.

CAUTION

yy Do not place the TV near or on sources of heat, as this may result in fire or other damage.

<![if ! IE]>

<![endif]>ENGLISH

14 ASSEMBLING AND PREPARING

Securing the TV to a wall

(This feature is not available for all models.)

1Insert and tighten the eye-bolts, or TV brackets and bolts on the back of the TV.

-- If there are bolts inserted at the eye-bolts position, remove the bolts first.

2Mount the wall brackets with the bolts to the wall. Match the location of the wall bracket and the eyebolts on the rear of the TV.

3Connect the eye-bolts and wall brackets tightly with a sturdy rope.

Make sure to keep the rope horizontal with the flat

.

WARNING

yy If a television is not positioned in a sufficiently stable location, it can be potentially hazardous due to falling. Many injuries, particularly to children, can be avoided by taking simple precautions such as:

»» Using cabinets or stands recommended by the manufacturer of the television.

»» Only using furniture that can safely support the television.

»» Ensuring the television is not overhanging the edge of the supporting furniture.

»» Not placing the television on tall furniture (for example, cupboards or bookcases) without anchoring both the furniture and the television to a suitable support.

»» Not standing the televisions on cloth or other materials placed between the television and supporting furniture.

»» Educating children about the dangers of climbing on furniture to reach the television or its controls.

Using the Kensington security system

(This feature is not available for all models.)

The Kensington security system connector is located at the rear of the TV. For more information of installation and using, refer to the manual provided with the Kensington security system or visit http://www.kensington.com.

CAUTION

yy Make sure that children do not climb on or hang on the TV.

NOTE

yy Use a platform or cabinet that is strong and large enough to support the TV securely.

yy Brackets, bolts and ropes are not provided. You can obtain additional accessories from your local dealer.

Connect the Kensington security system cable between the TV and a table.

Mounting on a wall

Attach an optional wall mount bracket at the rear of the TV carefully and install the wall mount bracket on a solid wall perpendicular to the floor. When you attach the

TV to other building materials, please contact qualified personnel.

LG recommends that wall mounting be performed by a qualified professional installer.

10 cm

10 cm

10 cm

10 cm

Make sure to use screws and wall mount bracket that meet the VESA standard. Standard dimensions for the wall mount kits are described in the following table.

Separate purchase(Wall Mounting Bracket)

Model

32LN510*,

39/42LN510*,

32LN511*,

39/42LN511*,

32LN512*,

39/42LN512*,

32LN513*,

39/42LN513*

32LN515*

VESA (A x B)

200 x 100

200 x 200

Standard screw

M4

M6

Number of screws

4

4

Wall mount bracket

LSW130B

LSW230B

A

B

ASSEMBLING AND PREPARING

15

CAUTION

yy Disconnect the power first, and then move or install the TV. Otherwise electric shock may occur.

yy If you install the TV on a ceiling or slanted wall, it may fall and result in severe injury.

Use an authorized LG wall mount and contact the local dealer or qualified personnel.

yy Do not over tighten the screws as this may cause damage to the TV and void your warranty.

yy Use the screws and wall mounts that meet the

VESA standard. Any damages or injuries by misuse or using an improper accessory are not covered by the manufacturer’s warranty.

NOTE

yy Use the screws that are listed on the VESA standard screw specifications.

yy The wall mount kit includes an installation manual and necessary parts.

yy The wall mount bracket is not provided. You can obtain additional accessories from your local dealer.

yy The length of screws may differ depending on the wall mount. Make sure to use the proper length. yy For more information, refer to the manual supplied

with the wall mount.

<![if ! IE]>

<![endif]>ENGLISH