LG Electronics 32LS5600, 42LS5600, 47LS4600, 47LS5600, 47LS5650 User Manual

OWNER’S MANUAL

LED LCD TV

Please read this manual carefully before operating your set and retain it for future reference.

47LS4600	32LS5600	42LS5650
55LS4600	37LS5600	47LS5650
	42LS5600	55LS5650
	47LS5600
	55LS5600

P/NO : MFL67468124 (1201-REV00)

www.lg.com

ENGLISH

2 LICENSES / OPEN SOURCE SOFTWARE NOTICE

LICENSES

Supported licenses may differ by model. For more information about licenses, visit www.lg.com.

Manufactured under license from Dolby Laboratories. “Dolby” and the double-D symbol are trademarks of Dolby Laboratories.

HDMI, the HDMI logo and High-Definition Multimedia Interface are trademarks or registered trademarks of HDMI Licensing LLC.

ABOUT DIVX VIDEO: DivX® is a digital video format created by DivX, LLC, a subsidiary of Rovi Corporation. This is an official DivX Certified® device that plays DivX video. Visit divx.com for more information and software tools to convert your files into DivX video.

ABOUT DIVX VIDEO-ON-DEMAND: This DivX Certified® device must be registered in order to play purchased DivX Video-on-Demand (VOD) movies. To obtain your registration code, locate the DivX VOD section in your device setup menu. Go to vod.divx.com for more information on how to complete your registration.

“DivX Certified® to play DivX® video up to HD 1080p, including premium content.”

“DivX®, DivX Certified® and associated logos are trademarks of Rovi Corporation or its subsidiaries and are used under license.”

“Covered by one or more of the following U.S. patents: 7,295,673; 7,460,668; 7,515,710; 7,519,274”

OPEN SOURCE SOFTWARE NOTICE

To obtain the source code under GPL, LGPL, MPL and other open source licenses, that is contained in this product, please visit http://opensource.lge.com .

In addition to the source code, all referred license terms, warranty disclaimers and copyright notices are available for download.

LG Electronics will also provide open source code to you on CD-ROM for a charge covering the cost of performing such distribution (such as the cost of media, shipping and handling) upon email request to [e-mail]. This offer is valid for three (3) years from the date on which you purchased the product.

IMPORTANT SAFETY INSTRUCTIONS 3

IMPORTANT SAFETY INSTRUCTIONS

Always comply with the following precautions to avoid dangerous situations and ensure peak performance of your product.

TO REDUCE THE RISK OF ELECTRIC SHOCK DO NOT REMOVE COVER (OR BACK). NO USER SERVICEABLE PARTS INSIDE. REFER TO QUALIFIED SERVICE PERSONNEL.

The lightning flash with arrowhead symbol, within an equilateral triangle, is intended to alert the user to the

presence of uninsulated “dangerous voltage” within the product’s enclosure that may be of sufficient magnitude to constitute a risk of electric shock to persons.

The exclamation point within an

equilateral triangle is intended to alert the user to the presence of important

operating and maintenance (servicing) instructions in the literature accompanying the appliance.

WARNING/CAUTION

-TO REDUCE THE RISK OF FIRE AND ELECTRIC SHOCK, DO NOT EXPOSE THIS PRODUCT TO RAIN OR MOISTURE.

Read these instructions.

Keep these instructions.

Heed all warnings.

Follow all instructions.

yyDo not use this apparatus near water.

yyClean only with a dry cloth.

yyDo not block any ventilation openings. Install in accordance with the manufacturer’s instructions.

yyDo not install near any heat sources such as radiators, heat registers, stoves, or other apparatus (including amplifiers) that produce heat.

yyDo not defeat the safety purpose of the polarized or grounding-type plug. A polarized plug has two blades with one wider than the other. A grounding type plug has two blades and a third grounding prong. The wide blade or the third prong are provided for your safety. If the provided plug does not fit into your outlet, consult an electrician for replacement of the obsolete outlet (Can differ by country).

ENGLISH

ENGLISH

4 IMPORTANT SAFETY INSTRUCTIONS

yyProtect the power cord from being walked on or pinched particularly at plugs, convenience receptacles, and the point where they exit from the apparatus.

yyOnly use attachments/accessories specified by the manufacturer.

yyUse only with a cart, stand, tripod, bracket, or table specified by the manufacturer, or sold with the apparatus. When a cart is used, use caution when moving the cart/apparatus combination to avoid injury from tip-over.

yyUnplug this apparatus during lightning storms or when unused for long periods of time.

yyRefer all servicing to qualified service personnel. Servicing is required when the apparatus has been damaged in any way, such as power-supply cord or plug is

damaged, liquid has been spilled or objects have fallen into the apparatus, the apparatus has been exposed to rain or moisture, does not operate normally, or has been dropped.

yyNever touch this apparatus or antenna during a thunder or lightning storm.

yyWhen mounting a TV on the wall, make sure not to install the TV by hanging the power and signal cables on the back of the TV.

yyDo not allow an impact shock or any objects to fall into the product, and do not drop anything onto the screen.

yyKeep the packing anti-moisture material or vinyl packing out of the reach of children. Anti-moisture material is harmful if swallowed. If swallowed by mistake, force the patient to vomit and visit the nearest hospital. Additionally, vinyl packing can cause suffocation. Keep it out of the reach of children.

yyCAUTION concerning the Power Cord (Can differ by country):

It is recommended that appliances be placed upon a dedicated circuit; that is, a single outlet circuit which powers only that appliance and has no additional outlets or branch circuits. Check the specification page of this owner’s manual to be certain. Do not connect too many appliances to the same AC power outlet as this could result in fire or electric shock. Do not overload wall outlets. Overloaded wall outlets, loose or damaged wall outlets, extension cords, frayed power cords, or damaged or cracked wire insulation are dangerous. Any of these conditions could result in electric shock or fire. Periodically examine the cord of your appliance, and

if its appearance indicates damage or deterioration, unplug it, discontinue use of the appliance, and have the cord replaced with an exact replacement part by an authorized service. Protect the power cord from physical or mechanical abuse, such as being twisted, kinked, pinched, closed in a door, or walked upon. Pay particular attention to plugs, wall outlets, and the point where the cord exits the appliance. Do not move the TV with the power cord plugged in. Do not use a damaged or loose power cord. Be sure do grasp the plug when unplugging the power cord. Do not pull on the power cord to unplug the TV.

yyDo not stick metal objects or any other conductive material into the power cord. Do not touch the end of the power cord while it is plugged in.

IMPORTANT SAFETY INSTRUCTIONS 5

yyWarning - To reduce the risk of fire or

yyANTENNAS Outdoor antenna grounding

electrical shock, do not expose this product

(Can differ by country):

to rain, moisture or other liquids. Do not

If an outdoor antenna is installed, follow

touch the TV with wet hands. Do not install

the precautions below. An outdoor antenna

this product near flammable objects such

system should not be located in the vicinity

as gasoline or candles, or expose the TV to

of overhead power lines or other electric light

direct air conditioning.

or power circuits, or where it can come in

contact with such power lines or circuits as

death or serious injury can occur. Be sure the

antenna system is grounded so as to provide

some protection against voltage surges

yyDo not expose to dripping or splashing and

and built-up static charges. Section 810 of

the National Electrical Code (NEC) in the

do not place objects filled with liquids, such

U.S.A. provides information with respect to

as vases, cups, etc. on or over the apparatus

proper grounding of the mast and supporting

(e.g. on shelves above the unit).

structure, grounding of the lead-in wire to

an antenna discharge unit, size of grounding

conductors, location of antenna discharge

unit, connection to grounding electrodes and

requirements for the grounding electrode.

yyGrounding

Antenna grounding according to the National

Electrical Code, ANSI/NFPA 70

(Except for devices which are not grounded.)

Ensure that you connect the earth ground

wire to prevent possible electric shock

Antenna Lead in Wire

(i.e. a TV with a three-prong grounded AC

plug must be connected to a three-prong

Ground Clamp

Antenna Discharge Unit

grounded AC outlet). If grounding methods

Electric Service

(NEC Section 810-20)

Equipment

Grounding Conductor

are not possible, have a qualified electrician

Ground Clamp

(NEC Section 810-21)

Power Service Grounding

install a separate circuit breaker. Do not try to

Electrode System

ground the unit by connecting it to telephone

NEC: National Electrical Code

(NEC Art 250, Part H)

wires, lightening rods, or gas pipes.

yyCleaning

When cleaning, unplug the power cord and

Power Supply

wipe gently with a soft cloth to prevent

scratching. Do not spray water or other

liquids directly on the TV as electric shock

Short-circuit Breaker

may occur. Do not clean with chemicals

	yyDISCONNECTING DEVICE FROM THE MAIN	such as alcohol, thinners or benzine.
		yyMoving
	POWER
		Make sure the product is turned off,
	Mains plug is the disconnecting device.
		unplugged and all cables have been
	The plug must remain readily operable.
		removed. It may take 2 or more people to
	yyAs long as this unit is connected to the AC
		carry larger TVs. Do not press or put stress
	wall outlet, it is not disconnected from the
		on the front panel of the TV.
	AC power source even if the unit is turned
		yyVentilation
	off.
		Install your TV where there is proper
	yyDo not attempt to modify this product in any
		ventilation. Do not install in a confined
	way without written authorization from LG
		space such as a bookcase. Do not cover the
	Electronics. Unauthorized modification could
		product with cloth or other materials while
	void the user’s authority to operate this
		plugged. Do not install in excessively dusty
	product.
		places.

ENGLISH

ENGLISH

6 IMPORTANT SAFETY INSTRUCTIONS

yyIf you smell smoke or other odors coming from the TV, unplug the power cord and contact an authorized service center.

yyDo not press strongly upon the panel with your hand or a sharp object such as a nail, pencil or pen, or make a scratch on it.

yyKeep the product away from direct sunlight.

yyDot Defect

The Plasma or LCD panel is a high technology product with resolution of two million to six million pixels. In a very few cases, you could see fine dots on the screen while you’re viewing the TV. Those dots are deactivated pixels and do not affect the performance and reliability of the TV.

yyGenerated Sound

“Cracking” noise: A cracking noise that occurs when watching or turning off the TV is generated by plastic thermal contraction due to temperature and humidity. This noise is common for products where thermal deformation is required.

Electrical circuit humming/panel buzzing: A low level noise is generated from a highspeed switching circuit, which supplies a large amount of current to operate a product. It varies depending on the product.

This generated sound does not affect the performance and reliability of the product.

yyTake care not to touch the ventilation openings. When watching the TV for a long period, the ventilation openings may become hot. This does not affect the performance of the product or cause defects in the product.

yyIf the TV feels cold to the touch, there may be a small “flicker” when it is turned on. This is normal, there is nothing wrong with TV. Some minute dot defects may be visible on the screen, appearing as tiny red, green, or blue spots. However, they have no adverse effect on the TV’s performance. Avoid touching the LCD screen or holding your finger(s) against it for long periods of time. Doing so may produce some temporary distortion effects on the screen.

DISPOSAL (Hg lamp only used in LCD TVs)

The fluorescent lamp used in this product contains a small amount of mercury. Do not dispose of this product with general household waste. Disposal of this product must be carried out

in accordance to the regulations of your local authority.

Preventing “Image burn” or “Burn-in” on your TV screen

yyIf a fixed image displays on the TV screen for a long period of time, it will be imprinted and become a permanent disfigurement on the screen. This is “image burn” or “burn-in” and not covered by the warranty.

yyIf the aspect ratio of the TV is set to 4:3 for a long period of time, image burn may occur on the letterboxed area of the screen.

yyAvoid displaying a fixed image on the TV screen for a long period of time (2 or more hours for LCD, 1 or more hours for the Plasma TV) to prevent image burn.

For USA and Canada

NOTE TO CABLE/TV INSTALLER

This reminder is provided to call the CATV system installer’s attention to Article 820-40 of the National Electric Code (U.S.A.). The code provides guidelines for proper grounding and, in particular, specifies that the cable ground shall be connected to the grounding system of the building, as close to the point of the cable entry as practical.

TABLE OF CONTENTS 7

TABLE OF CONTENTS

2 LICENSES

2OPEN SOURCE SOFTWARE NOTICE

3IMPORTANT SAFETY INSTRUCTIONS

7TABLE OF CONTENTS

8Installation Procedure

8 ASSEMBLING AND PREPARING

8 Unpacking

10Parts and buttons

11Lifting and moving the TV

12Setting up the TV

12- Attaching the stand

13- Mounting on a table

13- Tidying cables

14- Mounting on a wall

15MAKING CONNECTIONS

15Connecting to an antenna or cable

16Connecting to a HD receiver, DVD, or VCR player

16- HDMI Connection

17- DVI to HDMI Connection

18- Component Connection

19- Composite Connection

20Connecting to a PC

20 - HDMI Connection, DVI to HDMI Connection or RGB Connection

22 Connecting to an Audio System

22 - Digital Optical Audio Connection

22 Connecting to a USB

23 REMOTE CONTROL

25 WATCHING TV

25Turning the TV on for the first time

26Using the user guide

27TROUBLESHOOTING

28SPECIFICATIONS

30 MAINTENANCE

30 Cleaning Your TV

30 - Screen, frame, cabinet and stand

30 - Power cord

NOTE

yyImage shown may differ from your TV. yyYour TV’s OSD (On Screen Display) may

differ slightly from that shown in this manual. yyThe available menus and options may differ from the input source or product model that

you are using.

yyNew features may be added to this TV in the future.

ENGLISH

8 ASSEMBLING AND PREPARING

Installation Procedure

1 Open the package and make sure all the accessories are included.

2 Attach the stand to the TV set.

3 Connect an external device to the TV set.

4 Make sure the network connection is available.

You can use the TV network functions only when the network connection is made.

ENGLISH

ASSEMBLING AND PREPARING

Unpacking

Check your product box for the following items. If there are any missing accessories, contact the local dealer where you purchased your product. The illustrations in this manual may differ from the actual product and item.

NOTE

yyThe items supplied with your product may vary depending on the model.

yyProduct specifications or contents of this manual may be changed without prior notice due to upgrade of product functions.

yyFor an optimal connection, HDMI cables and USB devices should have bezels less than 10 mm (0.39 inches) thick and 18 mm (0.7 inches) width.

yyUse an extension cable that supports USB 2.0 if the USB cable or USB memory stick does not fit into your TV's USB port.

AA

*A 10 mm (0.39 inches) *B 18 mm (0.7 inches)

CAUTION

yyDo not use any unapproved items to ensure the safety and product life span.

yyAny damages or injuries by using unapproved items are not covered by the warranty. yyIn case of some model, the thin film on screen is a part of TV, So don’t take it off.

ASSEMBLING AND PREPARING 9

Owner’s manual,

Power Cord

Remote control,

Batteries (AAA)

(See p.23)

(For 47LS4600,

32/37/42/47LS5600, 42/47LS5650)

Stand Screws		Desk-mount Screw		Cable holder
8 EA, M4 x 20		1 EA		(See p.13)
(See p.12)		(See p.13)

Stand Body		Stand Base		Wall Mount Inner Spacers
(See p.12)		(See p.12)		4 EA
				(See p.14)

Polishing cloth

(Depending on model) Use this to remove dust from the cabinet.

ENGLISH

ENGLISH

10 ASSEMBLING AND PREPARING

Parts and buttons

Screen

Remote control and intelligent1 sensors

Power indicator

Speakers

OK

SETTINGS INPUT

Touch buttons2

	Touch button	Description
	/ I	Turns the power on or off.
INPUT		Changes the input source.
SETTINGS		Accesses the Home menu, or saves your input and exits the menus.
OK		Selects the highlighted menu option or confirms an input
-	+	Adjusts the volume level.
v	^	Scrolls through the saved channels.

1Intelligent sensor - Adjusts the image quality and brightness based on the surrounding environment.

2All of the buttons are touch sensitive and can be operated through simple touch with your finger.