LG Electronics 32LG6000-ZA, 32PG6000-ZA, 37LG6000-ZA, 42LG6000-ZG, 42LG6100-ZH User Manual

...
0 (0)

ENGLISH

LCD TV

PLASMA TV

OWNER’S MANUAL

LCD TV MODELS

PLASMA TV MODELS

32LG60**

32PG60**

37LG60**

42PG60**

42LG60**

50PG60**

42LG61**

50PG70**

47LG60**

60PG70**

 

50PG40**

Please read this manual carefully before operating your TV.

Retain it for future reference.

Record model number and serial number of the TV. Refer to the label on the back cover and quote this information.

To your dealer when requiring service.

Trade Mark of the DVB Digital Video

Broadcasting Project (1991 to 1996)

ID Number(s): 5102: 32LG6000-ZA

5251: 32PG6000-ZA

5103: 37LG6000-ZA

5252: 32PG6010-ZE

5104: 42LG6000-ZA

5100: 42PG6000-ZA

5484: 42LG6100-ZB

5249: 42PG6010-ZE

5105: 47LG6000-ZA

5101: 50PG6000-ZA

5571: 42LG6000-ZG

5250: 50PG6010-ZE

5572: 47LG6000-ZG

5245: 50PG7000-ZB

5719: 42LG6100-ZH

5244: 60PG7000-ZB

 

5246: 50PG4000-ZA

Downloaded From TV-Manual.com Manuals

Downloaded From TV-Manual.com Manuals

ACCESSORIES

Ensure that the following accessories are included with your TV. If an accessory is missing, please contact the dealer where you purchased the TV.

Image shown may differ from your TV

 

 

 

 

 

 

 

 

 

Power Cord

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

Owner’s Manual

Batteries

This feature is not available for all models.

* Lightly wipe any stains or fingerprints on the surface of the TV with the polishing cloth.

Polishing Cloth

Do not use excessive force. This may cause

Polishing cloth for use on

scratching or discolouration.

 

PLASMA TV models

ACCESSORIES

 

 

 

 

 

 

 

 

 

(Except 50PG40** )

(50PG60** ,

 

50/60PG70** only)

 

(50PG40** only)

Cable management clip

LCD TV models

Cable management clip Protection cover (Refer to p.13)

Cable Holder (32/42PG60** :1EA, 50PG40** :2EA)

*This feature is not available for all models.

Ferrite core (Refer to p.11)

(This feature is not available for all models.)

Protection cover (Refer to p.13)

(32PG60** only)

4EA

bolts for stand assembly (Refer to p. 8)

(32/37LG60** only)

(42LG60

**,

42LG61 only)

 

 

 

 

**

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

32LG60** : 3EA 4EA 2EA 1EA 4EA 37LG60** : 4EA

bolts for stand assembly (Refer to p. 8)

1

Downloaded From TV-Manual.com Manuals

CONTENTS

ACCESSORIES . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1

PREPARATION

CONTENTS

Please set it up carefully so the product doesn’t fall

 

Front Panel Controls.....................................................

4

 

Back Panel Information ................................................

6

 

Stand Installation...........................................................

8

 

over.....................................................................................

9

 

Back Cover for Wire Arrangement ..........................

10

 

Swivel Stand .................................................................

11

 

Desktop Pedestal Installation ...................................

12

 

Wall Mount: Horizontal Installation ........................

13

 

Antenna Connection...................................................

14

EXTERNAL EQUIPMENT SETUP

HD Receiver Setup ......................................................

15

DVD Setup.....................................................................

17

VCR Setup.....................................................................

20

Insertion of CI Module ..............................................

22

Digital Audio Out Setup............................................

23

Other A/V Source Setup...........................................

24

Usb in Setup.................................................................

25

PC Setup........................................................................

26

- Screen Setup for PC Mode ..............................

29

WATCHING TV / PROGRAMME CONTROL

Remote Control Key Functions ...............................

34

Turning on the TV.......................................................

36

Programme Selection ................................................

36

Volume Adjustment ...................................................

36

Quick Menu .................................................................

37

On-Screen Menus Selection and Adjustment.....

38

Auto Programme Tuning............................................

39

Manual Programme Tuning (In Digital Mode).....

40

Manual Programme Tuning (In Analogue Mode) ...

41

Programme Edit ...........................................................

43

Booster...........................................................................

46

Software Update..........................................................

47

Diagnostics ...................................................................

48

2

CI Information..............................................................

49

Selecting the Programme Table...............................

50

Input List........................................................................

51

.................................................................

52

Input Label ....................................................................

54

AV Mode........................................................................

55

TO USE THE USB DEVICE

 

When connecting the USB device..........................

56

Photo List ......................................................................

57

Music List........................................................................

61

EPG (ELECTRONIC PROGRAMME

 

GUIDE) (IN DIGITAL MODE)

 

- Switch on/off EPG ...............................................

64

- Select Programme ................................................

64

- Button Function in NOW/NEXT Guide Mode 65

- Button Function in 8 Day Guide Mode..........

65

- Button Function in Date Change Mode.........

65

-Button Function in Extended Description Box . 66

-Button Function in Record/Remind Setting Mode. 66

- Button Function in Schedule List Mode.........

66

PICTURE CONTROL

 

Picture Size (Aspect Ratio) Control.......................

67

Preset Picture Settings

 

- Picture Mode-Preset............................................

69

- Auto Colour Tone Control

 

(Warm/Medium/Cool) ........................................

70

Manual Picture Adjustment

 

- Picture Mode-User option.................................

71

-Picture Mode-Expert Control.............................

72

Picture Improvement Technology...........................

73

Advanced - Film Mode/ Real Cinema ....................

74

Advanced - Black(Darkness) Level .........................

75

Advanced - Trumotion.................................................

76

TruMotion Demo ..........................................................

77

Eye Care..........................................................................

78

Picture Reset.................................................................

79

Downloaded From TV-Manual.com Manuals

Power Indicator .............................................................

80

Image Sticking Minimization (ISM) Method ........

81

Power Saving Picture Mode......................................

82

SOUND & LANGUAGE CONTROL

 

Auto Volume Leveler...................................................

83

Preset Sound Settings - Sound Mode...................

84

Sound Setting Adjustment -User Mode ...............

85

SRS TruSurround XT ..................................................

85

Clear Voice....................................................................

86

Balance...........................................................................

87

TV Speakers On/ Off Setup.....................................

88

Selecting Digital Audio Out .....................................

89

Audio Reset ..................................................................

90

I/II

 

- Stereo/Dual Reception (In Analogue Mode

 

Only)...........................................................................

91

- NICAM Reception (In Analogue Mode Only)...

92

- Speaker Sound Output Selection....................

92

On-Screen Menu Language/Country Selection..

93

Language Selection (In Digital Mode only).........

94

TELETEXT

 

Switch on/off .............................................................

103

SIMPLE Text................................................................

103

TOP Text......................................................................

103

FASTEXT......................................................................

104

Special Teletext Functions ......................................

104

DIGITAL TELETEXT

 

Teletext within Digital Service................................

105

Teletext in Digital Service........................................

105

APPENDIX

 

Troubleshooting ........................................................

106

Maintenance ..............................................................

108

Product Specifications.............................................

109

Programming the Remote Control.........................

111

IR Codes.......................................................................

113

External Control Device Setup...............................

115

CONTENTS

TIME SETTING

 

Clock Setup ..................................................................

95

Auto On/ Off Timer Setting.....................................

96

Auto Shut-off Setting .................................................

97

Time Zone Setup ........................................................

98

Sleep Timer Setting ....................................................

98

PARENTAL CONTROL / RATINGS

 

Set Password & Lock System...................................

99

Block Programme ......................................................

100

Parental Control.........................................................

101

Key Lock ......................................................................

102

3

Downloaded From TV-Manual.com Manuals

PREPARATION

FRONT PANEL CONTROLS

PREPARATION

Image shown may differ from your TV

If your TV has a protection film attached, remove the film and then wipe the product with a polishing cloth.

Plasma TV Models

Remote Control Sensor

POWER

Power/Standby Indicator

• Illuminates red in standby mode.

• Illuminates green when the TV is switched on.

INPUT

MENU

OK

 

P

 

INPUT

MENU

OK

VOLUME

PROGRAMME

4

Downloaded From TV-Manual.com Manuals

LCD TV Models

 

 

 

P

PROGRAMME

 

 

 

 

VOLUME

 

 

OK

 

OK

 

Intelligent Sensor

 

MENU

MENU

 

Adjusts picture according to the sur-

 

 

 

rounding conditions

 

 

 

 

INPUT

 

INPUT

 

POWER

Remote Control Sensor

Power/Standby Indicator

Illuminates red in standby mode.

Illuminates White when the TV is switched on.

Note: You can adjust Power Indicator in the

OPTION menu.

PREPARATION

5

Downloaded From TV-Manual.com Manuals

PREPARATION

PREPARATION

6

BACK PANEL INFORMATION

A Image shown may differ from your TV.

50PG40** Only

 

Plasma TV Models

 

 

 

10

 

50PG40** Only

 

 

 

 

 

1

 

 

 

 

 

 

12

13

2

3

4

5

 

 

 

2

 

 

2

 

 

 

 

 

11

 

 

 

 

 

 

 

 

 

 

 

 

6

7

8

9

1Power Cord Socket

This TV operates on an AC power. The voltage is indicated on the Specifications page. Never attempt to operate the TV on DC power.

2HDMI Input

Connect a HDMI signal to HDMI IN.

7

8

RS-232C IN (CONTROL & SERVICE) PORT

Connect to the RS-232C port on a PC.

Euro Scart Socket (AV1/AV2)

Connect scart socket input or output from an external device to these jacks.

Or DVI(VIDEO)signal to HDMI/DVI port with DVI to HDMI cable.

3RGB/DVI Audio Input

Connect the audio from a PC or DTV.

4OPTICAL DIGITAL AUDIO OUT

Connect digital audio from various types of equipment. Note: In standby mode, these ports do not work.

5Component Input

Connect a component video/audio device to these jacks.

6RGB Input

Connect the output from a PC.

9Antenna Input

Connect RF antenna to this jack.

10PCMCIA (Personal Computer Memory Card International Association) Card Slot

(This feature is not available in all countries.)

11S-Video Input

Connect S-Video out from an S-VIDEO device.

Audio/Video Input

Connect audio/video output from an external device to these jacks.

12USB Input

13SERVICE ONLY PORT

Downloaded From TV-Manual.com Manuals

LCD TV Models

2

3

4

1

HDMI Input

Connect a HDMI signal to HDMI IN.

USB Input

PCMCIA (Personal Computer Memory Card International Association) Card Slot

(This feature is not available in all countries.)

PREPARATION

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

5

6

 

7

 

 

 

 

8

 

 

 

 

 

 

 

 

 

 

1Power Cord Socket

This TV operates on an AC power. The voltage is indicated on the Specifications page. Never attempt to operate the TV on DC power.

2RS-232C IN (CONTROL & SERVICE) PORT

Connect to the RS-232C port on a PC.

3RGB Input

Connect the output from a PC.

RGB/DVI Audio Input

Connect the audio from a PC or DTV.

4HDMI Input

Connect a HDMI signal to HDMI IN.

Or DVI(VIDEO)signal to HDMI/DVI port with DVI to HDMI cable.

9

5Component Input

Connect a component video/audio device to these jacks.

6Audio/Video Input

Connect audio/video output from an external device to these jacks.

7OPTICAL DIGITAL AUDIO OUT

Connect digital audio from various types of equipment. Note: In standby mode, these ports do not work.

8Euro Scart Socket (AV1/AV2)

Connect scart socket input or output from an external device to these jacks

9Antenna Input

Connect RF antenna to this jack.

7

Downloaded From TV-Manual.com Manuals

LG Electronics 32LG6000-ZA, 32PG6000-ZA, 37LG6000-ZA, 42LG6000-ZG, 42LG6100-ZH User Manual

PREPARATION

PREPARATION

STAND INSTALLATION

Image shown may differ from your TV

When assembling the desk type stand, check whether the bolt is fully tightened. (If not tightened fully, the product can tilt forward after the product installation.) If you tighten the bolt with excessive force, the bolt can deviate from abrasion of the tightening part of the bolt.

32/37/42LG60** , 42LG61** Only

1Carefully place the TV screen side down on a cushioned surface to protect the screen from damage.

2Assemble the parts of the Stand Body with Cover Base of the TV.

32LG60**

37LG60**

Stand Body

Cover Base

42LG60** , 42LG61**

Stand Body

Cover Base

3Assemble the TV as shown.

32PG60** Only

1Carefully place the TV screen side down on a cushioned surface to protect the screen from damage.

2Assemble the TV as shown.

3Fix the 4 bolts securely using the holes in the back of the TV.

4Fix the 4 bolts securely using the holes in the back of the TV.

8

Downloaded From TV-Manual.com Manuals

PLEASE SET IT UP CAREFULLY SO THE PRODUCT DOESN’T FALL OVER.

A You should purchase necessary components to fix the TV to the wall on the market.

A Position the TV close to the wall to avoid the possibility of it falling when pushed.

A The instructions shown below are a safer way to set up the TV, which is to fix it to the wall, avoiding the possibility of it falling forwards if pulled. This will prevent the TV from falling forward and causing injury. This will also prevent the TV from damage. Ensure that children do not climb or hang from the TV.

 

1

1

 

2

2

1

Use the eye-bolts or TV brackets/bolts to fix the product to the wall as shown in the picture.

(If your TV has bolts in the eyebolts, loosen then bolts.)

* Insert the eye-bolts or TV brackets/bolts and tighten them securely in the upper holes.

2Secure the wall brackets with the bolts on the wall. Match the height of the bracket that is mounted on the wall.

PREPARATION

3

3Use a sturdy rope to tie the product. It is safer to tie the rope so it becomes horizontal between the wall and the product.

! NOTE

GWhen moving the TV undo the cords first.

GUse a platform or cabinet strong and large enough to support the size and weight of the TV.

GTo use the TV safely make sure that the height of the bracket on the wall and on the TV is the same.

9

Downloaded From TV-Manual.com Manuals

PREPARATION

PREPARATION

BACK COVER FOR WIRE ARRANGEMENT

Image shown may differ from your TV.

Plasma TV models

1Connect the cables as necessary.

To connect additional equipment, see the External equipment Setup section.

2 Install the CABLE MANAGEMENT CLIP as shown.

32/42PG60**

50PG40**

CABLE MANAGEMENT CLIP

* Fix the Cable Holder as shown and bundle the cables.

How to remove the cable management clip

50PG60**, 50/60PG70**

CABLE MANAGEMENT CLIP

Hold the CABLE MANAGEMENT CLIP with both hands and pull it upward.

For the 42PG60** model, press the center of the CABLE MANAGEMENT CLIP and then lift it .

32PG60**

42PG60

50PG40**

50PG60**, 50/60PG70**

 

**

 

 

Separate CABLE MANAGEMENT

from TV by pressing two latches.

! NOTE

G Do not use the CABLE MANAGEMENT CLIP to lift the TV.

- If the TV is dropped, you may be injured or the TV may be damaged.

10

Downloaded From TV-Manual.com Manuals

LCD TV models

1Align the hole with the tab on the CABLE MANAGEMENT CLIP. Turn the CABLE MANAGEMENT CLIP as shown.

Note that excessive force might cause damage to the product when using Cable Management clip.

PREPARATION

2Connect the cables as necessary.

To connect additional equipment, see the External equipment Setup section.

Use of ferrite core (This feature is not available for all models.)

Ferrite core can be used to reduce the electromagnetic wave when connecting the power cord.

The closer the location of the ferrite core to the power plug, the better it is.

Install the power plug closely.

SWIVEL STAND

After installing the TV, you can adjust the TV set manually to the left or right direction by 20 degrees to suit your viewing position.

11

Downloaded From TV-Manual.com Manuals

PREPARATION

AThe TV can be installed in various ways such as on a wall, or on a desktop etc.

AThe TV is designed to be mounted horizontally.

 

EARTHING

 

 

 

PREPARATION

 

 

 

Ensure that you connect the earth wire to prevent possible

 

 

 

 

 

 

 

 

 

 

 

electric shock. If grounding methods are not possible, have a

 

 

 

 

qualified electrician install a separate circuit breaker.

 

 

 

 

Do not try to earth the TV by connecting it to telephone

 

 

 

 

wires, lightening rods or gas pipes.

 

 

 

 

 

 

 

 

 

 

 

Power Supply

Circuit breaker

DESKTOP PEDESTAL INSTALLATION

For adequate ventilation allow a clearance of 4” (10cm) all around the TV.

4 inches

4 inches

 

 

 

 

 

 

4 inches

 

 

 

 

 

 

 

4 inches

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

12

Downloaded From TV-Manual.com Manuals

WALL MOUNT: HORIZONTAL INSTALLATION

For adequate ventilation allow a clearance of 4” (10cm) all around the TV. We recommend that you use a wall mount-ing bracket of LG brand when mounting the TV to a wall.

 

4 inches

 

4 inches

4 inches

4 inches

 

 

4 inches

NOT USING THE DESK-TYPE STAND

Image shown may differ from your TV.

When installing the wall-mounted unit, use the protection cover for desk-type stand installation.

Plasma TV models

LCD TV models

After removing the protection paper from the protection cover, adhere it to the TV as shown.

PREPARATION

13

Downloaded From TV-Manual.com Manuals

PREPARATION

To prevent damage do not connect to the mains outlet until all connections are made between the devices.

ANTENNA CONNECTION

For optimum picture quality, adjust antenna direction.

An antenna cable and converter are not supplied.

PREPARATION

Wall

Antenna

Socket

Outdoor

Antenna

(VHF, UHF)

Antenna

Multi-family Dwellings/Apartments (Connect to wall antenna socket)

RF Coaxial Wire (75 ohm)

Single-family Dwellings /Houses

(Connect to wall jack for outdoor antenna)

UHF

Signal

Amplifier

VHF

ANTENNA

IN

ANTENNA

IN

In poor signal areas, to achieve better picture quality it may be necessary to install a signal amplifier to the antenna as shown above.

If signal needs to be split for two TVs,use an antenna signal splitter for connection.

14

Downloaded From TV-Manual.com Manuals

EXTERNAL EQUIPMENT SETUP

To avoid damaging any equipment, never plug in any power cords until you have finished connecting all equipment.

This section on EXTERNAL EQUIPMENT SETUP mainly uses diagrams for the 42PG60** models.

Image shown may differ from your TV.

HD RECEIVER SETUP

This TV can receive Digital RF/Cable signals without an external digital set-top box. However, if you do receive Digital signals from a digital set-top box or other digital external device, refer to the diagram as shown below.

Connecting with a component cable

1

Connect the video outputs (Y, PB, PR) of the digital set top box to the COMPONENT IN VIDEO jacks on the TV.

2Connect the audio output of the digital set-top box to the COMPONENT IN AUDIO jacks on the TV.

3Turn on the digital set-top box.

(Refer to the owner’s manual for the digital set-top box.)

4Select Component input source using the INPUT button on the remote control.

1

2

SETUP EQUIPMENT EXTERNAL

Signal

Component

HDMI

 

 

 

 

Yes

No

480i/576i

480p/576p

Yes

Yes

720p/1080i

Yes

Yes

1080p

Yes

Yes

(50/60Hz only)

(24Hz/30Hz/50Hz/60Hz)

 

 

 

 

 

 

 

15

Downloaded From TV-Manual.com Manuals

EXTERNAL EQUIPMENT SETUP

Connecting a set-top box with an HDMI cable

 

1

Connect the digital set-top box to HDMI/DVI IN 1,

 

HDMI IN 2, HDMI IN 3 or HDMI IN 4(Except

 

 

 

 

 

 

50PG40**) jack on the TV.

 

2

 

EXTERNAL

Turn on the digital set-top box.

3

Select HDMI1, HDMI2, HDMI3 or HDMI4(Except

 

 

 

(Refer to the owner’s manual for the digital set-top box.)

SETUPEQUIPMENT

 

 

50PG40**) input source using the INPUT button on

 

 

the remote control.

 

 

 

 

 

 

 

Connecting with an HDMI to DVI cable

1Connect the digital set-top box to HDMI/DVI IN 1 jack on the TV.

2Connect the audio output of the digital set-top box to the AUDIO IN (RGB/DVI) jack on the TV.

3Turn on the digital set-top box. (Refer to the owner’s manual for the digital set-top box.)

4Select HDMI1 input source using the INPUT button on the remote control.

16

1

12

Downloaded From TV-Manual.com Manuals

DVD SETUP

Connecting with a component cable

1 Connect the video outputs (Y, PB, PR) of the DVD to the COMPONENT IN VIDEO jacks on the TV.

 

1

2

Connect the audio outputs of the DVD to the

 

COMPONENT IN AUDIO jacks on the TV.

3

Turn on the DVD player, insert a DVD.

 

2

4

Select Component input source using the INPUT

 

button on the remote control.

5

Refer to the DVD player's manual for operating instruc-

 

tions.

SETUP EQUIPMENT EXTERNAL

Component Input ports

To achieve better picture quality, connect a DVD player to the component input ports as shown below.

Component ports on the TV

Y

PB

PR

 

 

 

 

 

 

 

 

 

Y

PB

PR

Video output ports

Y

B-Y

R-Y

on DVD player

Y

Cb

Cr

 

Y

Pb

Pr

 

 

 

 

17

Downloaded From TV-Manual.com Manuals

EXTERNAL EQUIPMENT SETUP

Connecting with a Euro Scart cable

 

 

 

1

Connect the Euro scart socket of the DVD to the AV1

 

 

 

 

 

 

 

 

 

 

Euro scart socket on the TV.

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

EXTERNAL

3

the remote control.

 

 

 

 

 

2

Turn on the DVD player, insert a DVD.

 

 

 

 

 

 

Select AV1 input source using the INPUT button on

 

 

EQUIPMENT

 

If connected to AV2 Euro scart socket, select AV2

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

input source.

 

 

 

 

 

4

Refer to the DVD player's manual for operating

 

 

SETUP

 

 

instructions.

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

!

NOTE

 

 

G Any Euro scart cable used must be signal shielded.

Connecting with a S-Video cable (Plasma TV Only)

Connect the S-VIDEO output of the DVD to the S -

1VIDEO input on the TV.

2Connect the audio outputs of the DVD to the AUDIO input jacks on the TV.

3Turn on the DVD player, insert a DVD.

4Select AV3 input source using the INPUT button on the remote control.

5Refer to the DVD player's manual for operating instructions.

18

1

 

 

(R) AUDIO (L)

 

 

 

 

 

 

 

AUDIO/

 

VIDEO

 

 

 

 

VIDEO

S-VIDEO

L

R

ANT IN

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

ANT OUT

12

Downloaded From TV-Manual.com Manuals

Connecting the HDMI cable

Connect the HDMI output of the DVD to the

1HDMI/DVI IN 1, HDMI IN 2, HDMI IN 3 or HDMI IN 4(Except 50PG40**) jack on the TV.

2 Select HDMI1, HDMI2, HDMI3 or HDMI4(Except 50PG40**) input source using the INPUT button on the remote control.

3 Refer to the DVD player's manual for operating instructions.

1

! NOTE

G The TV can receive video and audio signals simultaneously when using a HDMI cable.

G If the DVD does not support Auto HDMI, you must set the output resolution appropriately.

SETUP EQUIPMENT EXTERNAL

19

Downloaded From TV-Manual.com Manuals

EXTERNAL EQUIPMENT SETUP

SETUP EQUIPMENT EXTERNAL

VCR SETUP

To avoid picture noise (interference), allow adequate distance between the VCR and TV.

Typically a frozen still picture from a VCR. If 4:3 picture format is used for an extended period the fixed images on the sides of the screen may remain visible.

Connecting with a RF Cable

 

 

 

 

 

 

 

 

 

 

 

 

 

ANT OUT S-VIDEO VIDEO

L

R

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

1

OUTPUT

SWITCH

Wall Jack

2

Antenna

1

2

Connect the ANT OUT socket of the VCR to the ANTENNA IN socket on the TV.

Connect the antenna cable to the ANT IN socket of the VCR.

3Press the PLAY button on the VCR and match the appropriate channel between the TV and VCR for viewing.

20

Downloaded From TV-Manual.com Manuals

Connecting with a Euro Scart cable

1

Connect the Euro scart socket of the VCR to the AV1

Euro scart socket on the TV.

 

2

Insert a video tape into the VCR and press PLAY on

 

the VCR. (Refer to the VCR owner’s manual.)

 

1

3

Select AV1 input source using the INPUT button on

the remote control.

 

4

If connected to AV2 Euro scart socket, select AV2

 

input source.

 

 

 

 

 

 

 

 

 

 

(R) AUDIO (L)

 

 

 

 

 

 

 

 

 

 

 

AUDIO/

 

 

VIDEO

 

 

! NOTE

G Any Euro Scart cable used must be signal shielded.

SETUP EQUIPMENT EXTERNAL

Connecting with a RCA cable

1Connect the AUDIO/VIDEO jacks between TV and VCR. Match the jack colours (Video = yellow, Audio Left = white, and Audio Right = red)

2Insert a video tape into the VCR and press PLAY on the VCR. (Refer to the VCR owner’s manual.)

3Select AV3 input source using the INPUT button on the remote control.

!NOTE

G If you have a mono VCR, connect the audio cable from the VCR to the AUDIO L/MONO jack of the TV.

1

S-VIDEO VIDEO

L

R

ANT IN

OUTPUT

 

 

ANT OUT

SWITCH

 

 

 

21

Downloaded From TV-Manual.com Manuals

EXTERNAL EQUIPMENT SETUP

Connecting with a S-Video cable (Plasma TV Only)

 

1

Connect the S-VIDEO output of the VCR to the S -

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

VIDEO input on the TV set. The picture quality is

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

improved; compared to normal composite (RCA cable)

 

 

 

 

 

 

 

 

 

input.

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

2

Connect the audio outputs of the VCR to the AUDIO

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

EXTERNAL

3

input jacks on the TV.

 

 

 

 

 

 

 

 

 

 

 

 

Insert a video tape into the VCR and press PLAY on the

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

EQUIPMENT

4

VCR. (Refer to the VCR owner’s manual.)

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

Select AV3 input source with using the INPUT button on

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

the remote control.

 

 

 

 

 

 

SETUP

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

! NOTE

 

 

 

 

 

 

 

 

 

 

 

 

G If both S-VIDEO and VIDEO sockets have been connected to

 

 

 

 

 

 

 

the S-VHS VCR simultaneously, only the S-VIDEO can be

 

 

 

 

 

 

 

 

 

 

 

 

 

 

received.

S-VIDEO VIDEO

L

R

ANT IN

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

OUTPUT

ANT OUT

SWITCH

 

12

INSERTION OF CI MODULE

-To view the encrypted (pay) services in digital TV mode.

-This feature is not available in all countries.

Insert the CI Module to PCMCIA (Personal Computer

1Memory Card International Association) CARD SLOT of TV as shown.

For further information, see p.49.

22

1

TV

Downloaded From TV-Manual.com Manuals

DIGITAL AUDIO OUT SETUP

Sending the TV’s audio signal to external audio equipment via the Digital Audio Output (Optical) port.

1

Connect one end of an optical cable to the TV Digital

 

 

Audio (Optical) Output port.

 

2

Connect the other end of the optical cable to the digi-

 

 

tal audio (Optical) input on the audio equipment.

 

3

Set the “TV Speaker option - Off ” in the AUDIO

1

 

 

 

menu.(Gp.88). Refer to the external audio equipment

 

 

instruction manual for operation.

 

 

 

2

CAUTION

GDo not look into the optical output port. Looking at the laser beam may damage your vision.

SETUP EQUIPMENT EXTERNAL

23

Downloaded From TV-Manual.com Manuals

EXTERNAL EQUIPMENT SETUP

OTHER A/V SOURCE SETUP

EQUIPMENT EXTERNAL

 

SETUP

1

 

Camcorder

Video Game Set

VIDEO L R

1Connect the AUDIO/VIDEO jacks between TV and external equipment. Match the jack colours . (Video = yellow, Audio Left = white, and Audio Right = red)

2

3

Select AV3 input source with using the INPUT button on the remote control.

Operate the corresponding external equipment.

Refer to external equipment operating guide.

24

Downloaded From TV-Manual.com Manuals

USB IN SETUP (Except 50PG40**)

1

1Connect the USB device to the USB IN jacks on the side of TV.

2

After connecting the USB IN jacks, you use the USB function. (G p.56)

 

 

 

SETUP EQUIPMENT EXTERNAL

25

Downloaded From TV-Manual.com Manuals

EXTERNAL EQIPMENT SETUP

PC SETUP

This TV provides Plug and Play capability, meaning that the PC adjusts automatically to the TV's settings.

Connecting with a D-sub 15 pin cable

 

 

 

 

 

 

1

Connect the RGB output of the PC to the RGB IN

EXTERNAL

(RGB/DVI) jack on the TV.

 

 

 

(PC) jack on the TV.

EQUIPMENT

2

Connect the PC audio output to the AUDIO IN

4

Select RGB input source using the INPUT button on

 

 

3

Turn on the PC and the TV

SETUP

 

the remote control.

 

 

 

 

Connecting with a HDMI to DVI cable

1Connect the DVI output of the PC to the HDMI/DVI IN1 jack on the TV.

2Connect the PC audio output to the AUDIO IN (RGB/DVI) jack on the TV.

3Turn on the PC and the TV.

4Select HDMI1 input source using the INPUT button on the remote control.

21

AUDIO

RGB OUTPUT

 

12

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

AUDIO

 

DVI-PC OUTPUT

 

 

 

 

 

 

 

 

 

 

 

26

Downloaded From TV-Manual.com Manuals

Supported Display Resolution

Plasma TV Models

RGB-PC, HDMI/DVI-PC mode

 

 

 

 

HDMI/DVI-DTV mode

 

 

 

 

 

 

 

 

 

 

Resolution

Horizontal

Vertical

 

 

 

Resolution

Horizontal

Vertical

Frequency(kHz)

Frequency(Hz)

 

 

 

Frequency(kHz)

Frequency(Hz)

 

 

 

 

 

 

 

 

 

 

 

 

31.649

59.94

720x400

31.468

70.08

 

 

 

640x480

640x480

31.469

59.94

 

 

 

 

31.469

60

800x600

37.879

60.31

 

 

 

720x480

31.47

59.94

1024x768

48.363

60.00

 

 

 

 

31.50

60

1280x768

47.78

59.87

 

 

 

720x576

31.25

50.00

1360x768

47.72

59.8

 

 

 

1280x720

37.50

50.00

1920x1080

66.587

59.937

 

 

 

 

44.96

59.94

1280x1024

63.98

60.02

 

 

 

 

45.00

60

1400x1050

65.317

59.979

 

 

 

1920x1080

28.125

50.00

 

 

 

 

 

 

 

 

 

 

33.72

59.94

 

50/60PG70**, 50PG40** only

 

 

 

33.75

60

 

 

 

 

 

 

 

 

 

 

 

 

 

 

27.00

24.00

 

 

 

 

 

 

 

33.75

30

 

 

 

 

 

 

 

56.25

50.00

 

 

 

 

 

 

 

67.433

59.94

 

 

 

 

 

 

 

67.50

60

LCD TV Models

 

RGB-PC, HDMI/DVI-PC mode

 

 

 

HDMI/DVI-DTV mode

 

 

 

 

 

 

 

 

 

 

 

Resolution

Horizontal

Vertical

 

 

Resolution

Horizontal

Vertical

 

Frequency(kHz)

Frequency(Hz)

 

 

Frequency(kHz)

Frequency(Hz)

 

 

 

 

 

 

 

 

 

 

 

 

31.469

59.94

 

720x400

31.468

70.08

 

 

640x480

 

640x480

31.469

59.94

 

 

 

31.469

60

 

800x600

37.879

60.31

 

 

720x480

31.47

59.94

 

1024x768

48.363

60.00

 

 

 

31.50

60

 

1280x768

47.78

59.87

 

 

720x576

31.25

50.00

 

1360x768

47.72

59.8

 

 

 

31.50

50.00

 

1920x1080

66.647

59.988

 

 

1280x720

44.96

50.94

 

1280x1024

63.981

60.02

 

 

 

45.00

60

 

1400x1050

65.317

59.979

 

 

 

28.125

50.00

 

 

 

 

 

 

 

 

 

 

 

33.72

59.94

 

 

 

Except 32LG60**

 

 

 

 

1920x1080

33.75

60

 

 

 

 

 

 

 

 

 

 

 

 

 

27.00

24.00

 

 

 

 

 

 

 

33.75

30

 

 

 

 

 

 

 

56.25

50.00

 

 

 

 

 

 

 

67.433

59.94

 

 

 

 

 

 

 

67.50

60

 

 

 

 

 

 

 

 

 

SETUP EQUIPMENT EXTERNAL

27

Downloaded From TV-Manual.com Manuals

EXTERNAL EQIPMENT SETUP

SETUP EQUIPMENT EXTERNAL

! NOTE

G To enjoy vivid picture and sound, connect a PC to the TV.

GAvoid keeping a fixed image on the set’s screen for prolonged periods of time. The fixed image may become permanently imprinted on the screen; use a screen saver when possible.

GConnect the PC to the RGB (PC) or HDMI IN (or HDMI/DVI IN) port of the TV; change the resolution.

GThere may be interference relating to resolution, vertical pattern, contrast or brightness in PC mode. Change the PC mode to another resolution or change the refresh rate to another rate or adjust the brightness and contrast on the menu until the picture is clear. If the refresh rate of the PC graphic card can not be changed, change the PC graphic card or consult the manufacturer of the PC graphic card.

GThe synchronization input waveform for Horizontal and Vertical frequencies are separate.

GConnect the signal cable from the monitor output port of the PC to the RGB (PC) port of the TV or the signal cable from the HDMI output port of the PC to the HDMI IN (or HDMI/DVI IN) port on the TV.

GConnect the audio cable from the PC to the Audio input on the TV. (Audio cables are not included with the TV).

GIf using a sound card, adjust PC sound as required.

GThis TV uses a VESA Plug and Play Solution. The TV provides EDID data to the PC system with a DDC protocol. The PC adjusts automatically when using this TV.

GDDC protocol is preset for RGB (Analog RGB), HDMI (Digital RGB) mode.

GIf required, adjust the settings for Plug and Play functionality

GIf the graphic card on the PC does not output analogue and digital RGB simultaneously, connect only one of either RGB or HDMI IN (or HDMI/DVI IN) to display the PC output on the TV.

GIf graphic card on the PC does output analog and digital RGB simultaneously, set the TV to either RGB or HDMI; (the other mode is set to Plug and Play automatically by the TV.)

GDOS mode may not work depending on the video card if you use a HDMI to DVI cable.

GIf you use too long an RGB-PC cable, there may be interference on the screen. We recommend using under 5m of cable. This provides the best picture quality.

GIf connected HDMI(1080p, over 12bit) to HDMI jack on the side, screen may abnormal.

28

Downloaded From TV-Manual.com Manuals

Loading...
+ 110 hidden pages