|
|
(Page.1/1) |
|
Service Bulletin |
Ref. No. 2MY-0003 (C189) |
||
|
[Service information] |
<Date> July 10, 2012 |
|
Subject |
System Error Information (F Code Error: Fxxx) |
|
|
Model |
FS-C8525MFP, FS-C8520MFP, FS-6530MFP, FS-6525MFP |
|
|
|
|
|
|
Topic
This document describes the outline of the factors of the Fxxx errors that are not described in the Service Manual. Please utilize this to find out the factors.
Please utilize it for your reference when the system was not recovered after turning the power OFF/ON or the F code frequently occurs.
(Notes) It may the hardware factor if the error (Fxxx) is indicated. Please initially check the following. - Check the DDR2 memory and its neighboring parts.
:Check the contact of YS1 on the main PWB with the memory. Replace the memory if the error is repeated.
(DDR2 memory: It is the standard item on the main PWB for the color models, but optional for the monochrome models.)
Caution
U021 Memory initializing
The backup RAM will be initialized according to the specifications of the destination as specified by the U252 “Setting the destination”.
--> After executing this mode: The setting values changed at setup and after can be input again.
KMC’s Classification |
Entire Stock Rework |
In-Field modification at next visit |
|
In-Field modification by case |
No modification necessary |
Field Measure: No particular problem is expected. Please utilize this information.
Serial Nos. of the Affected Machines: -----------
KYOCERA Document Solutions Europe
Technical Customer Service Division (TCSD)
Loading...