FS-6525
FS-C8020MFP_FS
-
C8025MFP_v05.
00.0020_(2012
-03-
05)
picking up a
Service Bulletin Ref. No.
Subject
2K3-0035 (C199)
<Date> July 19, 2012
Upgrade of the Firmware for the Enhancement Units
(ENHANCE Pack Ver. V1.1)
FS-6525MFP_FS-6530MFP_v.02.00.0020_(2012-05-21)
FS-6025MFP_FS-6030MFP_v05.00.0030_(2012-04-12)
(Page.1/2)
Model
(Installation target models) Common models with PF-470, DF-470, AK-470 and FAX System (U)
PF-470, DF-470, AK-470, FAX System (U)
FS-6030MFP, FS-6025MFP, FS-6025MFP/B,
FS-C8025MFP, FS-C8020MFP, FS-6530MFP, FS-6525MFP
Topic
The firmware for the enhancement units was upgraded as follows.
Content of Changes
No. Item Details MEMO
1 Measures against the
J6423 jam
J6423: DF eject paper
sensor remaining jam
2 Measures against the
failure when
handset during dial
3 Measures against the
transmission error
during the remote
diagnostics
Type ENHANCE Program No. Ver. Remarks
ENHANCE Pack Ver. 2K3EN_V1.1
PF-470 3NN_9000.001.018 001.018
DF-470 5JS_9200.003.002 003.002
AK-470 3NS_9B00.001.018 001.018
FAX System(U) 5JR_5500.B05.002 B05.002 Except KDCN
FAX System(U) 5JR_5600.Z05.002 Z05.002 For KDCN
ESPECIAL ES_SKIP.ON ----------
For the KD sales companies, it is possible to download the firmware at the download center on the Service W orld.
When upgrading the firmware or replacing a board, please upgrade all kinds of the firmware to the latest version at the same
time.
When paper in the cassette became empty at the state that 30 or more sheets of
A4R paper remaining for stapling process at the front side in the processing tray,
the paper bundle was not ejected and the paper jam (J6423) might occur even if
the job was cancelled. Therefore, this was corrected.
- Affected models: FS-C8025MFP, FS-C8020MFP
- J6423 occurs due to this cause only when A4R paper is used.
The line might not be cut off during dialing when pressing the on-hook key on the
operation panel after dialing by the dial pulse setting even if a handset (on-hook)
was reseated after picking up the handset (off-hook).
- The line is cut off by pressing the on-hook key on the operation panel or by
picking up and reseating the handset.
- The dial is not correctly sent and becomes busy in the state described above
(in case of picking up the handset). So, please try again.
- Transmission error might appear during the remote diagnostics (Memory Dump
request) in the case of the specific data size. Therefore, this was corrected.
- The F14D error might appear if printing document from the poling box or the F
code box during the remote diagnostics (Memory Dump request). Therefore,
this was corrected.
KYOCERA Document Solutions Europe
Technical Customer Service Division (TCSD)
New Upgrade
New Upgrade
New Upgrade
DF-470
FAX
638226
FAX
638218
Loading...