Fanuc B-65395EN Information Manual
ADDITIONAL INFORMATION
FANUC SERVO AMPLIFIER βi series I/O Link Option
NOTICE OF FEEDRATE PARAMETERS
１．Type of applied technical documents
Name
FANUC SERVO AMPLIFIER
I/O Link Option MAINTENANCE MANUAL
Spec.
No./Version
２．Summary of Change
Group Name/Outline
Basic
Function
Optional
A notice about the feedrate parameters has
been added.
Function
Unit
B-65395EN/01
βi series
New, Add
Correct,
Delete
Add Immediate
Applicable
Date
Maintenance
Parts
Notice
Correction
Another
Title
Draw
No.
FANUC SERVO AMPLIFIER βi series I/O Link Option
NOTICE OF FEEDRATE PARAMETERS
B-65395EN/01-1
Edit
Date
Date
Design
2004.11.11
Description
Apprv.Desig.
Sheet
1/2
Add the following NOTE to the parameters No.040, No.043, No.054, No.061, No.066,
and No.067 of "B.3 FEEDRATE PARAMETERS" and the parameter No.059 and
No.060 of "B.4 ACCELERATION/DECELERATION CONTROL PARAMETERS".
NOTE
1 The maximum of the setting range is shown in the following table according
to the setting value of N. When the setting value exceeds this maximum,
the actual feedrate is not correct.
Setting value of N Maximum of setting range
-
2 When N is equal to or less than 3, the actual feedrate has the error of 7 or 8
in N=3 (75 in N=2, 750 in N=1, 7500 in N=0), and the feedrate may be lower
than the setting value. This is caused by the computation precision. The
smaller the feedrate is given, the bigger the relative error becomes. In this
case, adjust the setting value. For example, when “40” is set in N=3, the
actual feedrate is 37. The actual feedrate is all 37 in the range of setting
value 37 to 44. When “45” is set, the actual feedrate is 45.
Edit
Date
Date
Design
Description
Title
Draw
No.
Apprv.Desig.
FANUC SERVO AMPLIFIER βi series I/O Link Option
NOTICE OF FEEDRATE PARAMETERS
B-65395EN/01-1
Sheet
2/2
FANUC SERVO AMPLIFIER βi series I/O Link Option Supported function for 88A6 series 03 edition
1. Type of applied documents
Name
Spec. No./Ver. B-65395EN/01
2. Summary of Change
Group
Basic Function 1. Added standard parameter table Add
Optional
Function
Unit
Maintenance
Parts
Notice
Correction
FANUC SERVO AMPLIFIER βi series
I/O Link Option MAINTENANCE MANUAL
Name / Outline New, Add
Correct, Del
Applicable
Date
2006.02
2006.2.09
Date Ed.
Another
TITLE
Notice of the update of software
88A6 series for I/O Link Option βi
Ikai
Design.
Newly designed
Description
DRAW. No.
FANUC LTD
B-65395EN/01-002
SHEET
CUST.
1/7
Notice of the update of software 88A6 series for I/O Link Option βi
We report the update of Software 88A6 series for I/O Link Option βi.
1. Update Edition
ROM series Edition Available CNC
88A6 03
FANUC SERVO AMPLIFIER βi series I/O Link Option
2. Contents of change
- New standard parameter table was added.
2. Attachment
1. Attachment 1 B.6 SERVO PARAMETERS : The motor type was added in order to load the standard
parameter for rotating the servo motor.
2. Attachment 2 B.7 DIGITAL SERVO STANDARD PARAMETER TABLE : The standard parameter
table was added.
2006.2.09
Date Ed.
Ikai
Design.
Newly designed
Description
TITLE
Notice of the update of software
88A6 series for I/O Link Option βi
DRAW. No.
B-65395EN/01-002
FANUC LTD
SHEET
CUST.
2/7
Loading...