Emerson LF320EM4 A User Manual

EMERSON AND THE G-CLEF LOGO ARE REGISTERED TRADEMARKS

OF EMERSON RADIO CORP., MOONACHIE, NEW JERSEY, U.S.A.

LF320EM4 A

EN Owner's Manual

ES Manual del Propietario

FR Manuel du Propriétaire

EN Need help?

Please call toll free or visit our web site below

ES ¿Necesita ayuda?

Llame por favor sin costo ó visite nuestro sitio web en

FR Besoin d’aide?

Appelez notre numéro gratuit ou visitez notre site web à l’adresse

§

1 866 309 8819

www.emersonaudiovideo.com

Contents

1	Notice	5
2	Important	6
	Positioning the TV	6
	Regulatory Notices	6
	Environmental Care	6
	Preparing to Move/Ship Unit	6
3	Get started	7
	Features	7
	Supplied accessories	7
	Symbols used in this Owner’s Manual	7
	Attaching the base	8
	Mounting the Unit on your furniture	8
	Installing the Remote Control batteries	8
	Remote Control	9
	Control Panel	10
	Terminals	10
	Connecting the Antenna, cable or Satellite	11
	Connecting a Set-top Box, Blu-ray disc / DVD Recorder via
	Composite connectors and Analog Audio	11
	Plugging in the AC Power cord	11
	Selecting your connection quality	12
	HDMI - Highest quality	12
	Component (Y Pb Pr) - High quality	12
	Composite - Basic quality	12
	Connecting your devices	12
	HDMI Digital connection	12
	DVI-HDMI connection	12
	Component Analog Video Connection	13
	Composite Analog Video Connection	13
	Digital Audio Output Connection	13
	PC connection	14
	USB Memory Stick	14
	Initial setup	15
4	Use your TV	16
	Switching on your TV and putting it in Standby mode	16
	Adjusting volume	16
	Switching channels	16
	Watching Channels from an External Device	17
	Changing Picture and Sound Settings	17
	Sleep timer	17
	Freeze Mode	17
	Switching Audio Mode	18
	Changing Picture Format	18
	TV Screen information	19

2 English

5 Use more of your TV		20
	Displaying the Main Menu	20
	Picture	21
	Sound	22
	Setup	22
	Autoprogram	22
	Channel list	23
	Add channels	23
	Antenna confirmation	23
	Features	24
	Caption Settings	24
	Child and Ratings Lock	25
	Channel lock	25
	Setting US Movie and TV Ratings	26
	Canadian English or Canadian French Ratings	27
	Change PIN	27
	PC settings	27
	fun-Link (HDMI CEC)	28
	Device list	28
	Setting your Location to Home	29
	E-sticker	29
	Language	29
	USB	30
	Picture (JPEG)	30
	Video (Motion JPEG)	30
6 Upgrade your TV software		31
	Checking your current software version	31
	Upgrading the software	31
7	Useful tips	32
	FAQ	32
	Troubleshooting	33
8	Information	34
	Glossary	34
	Maintenance	34
9	Specifications	35
10 Warranty		36

3 English

Register online at www.emersonaudiovideo.com today to get the very most from your purchase.

Registering your model with Emerson makes you eligible for all of the valuable benefits listed below, so don't miss out.

Register online at www.emersonaudiovideo.com to ensure:

*Product Safety Notification

By registering your product, you'll receive notification - directly from the manufacturer - in the rare case of a product recall or safety defect.

Know these safety symbols

CAUTION

RISK OF ELECTRIC SHOCK

DO NOT OPEN

CAUTION: TO REDUCE THE RISK OF ELECTRIC SHOCK, DO NOT REMOVE COVER (OR BACK). NO USER-SERVICEABLE PARTS INSIDE. REFER SERVICING TO QUALIFIED SERVICE PERSONNEL.

The caution marking is located on the rear or bottom of the cabinet.

*Additional Benefits

Registering your product guarantees that you'll receive all of the privileges to which you're entitled, including special money-saving offers.

The lightning flash with arrowhead symbol, within an equilateral triangle, is intended to alert the user to the presence of uninsulated “dangerous voltage” within the apparatus’s enclosure that may be of sufficient magnitude to constitute a risk of electric shock to persons.

The exclamation point within an equilateral triangle is intended to alert the user to the presence of important operating and maintenance (servicing) instructions in the literature accompanying the apparatus.

WARNING: To reduce the risk of fire or electric shock, do not expose this apparatus to rain or moisture. Apparatus shall not be exposed to dripping or splashing and no objects filled with liquids, such as vases, shall be placed on the apparatus.

CAUTION: To prevent electric shock, match wide blade of plug to wide slot, fully insert.

ATTENTION: Pour éviter les choc électriques,introduire la lame la plus large de la fiche dans la borne correspondante de la prise et pousser jusqu’au fond.

Visit our World Wide Web Site at www.emersonaudiovideo.com

CHILD SAFETY:

PROPER TELEVISION PLACEMENT MATTERS

THE CONSUMER ELECTRONICS INDUSTRY CARES

•Manufacturers, retailers and the rest of the consumer electronics industry are committed to making home entertainment safe and enjoyable.

•As you enjoy your television, please note that all televisions – new and oldmust be supported on proper stands or installed according to the manufacturer’s recommendations. Televisions that are inappropriately situated on dressers, bookcases, shelves, desks, speakers, chests, carts, etc., may fall over, resulting in injury.

TUNE IN TO SAFETY

•ALWAYS follow the manufacturer’s recommendations for the safe installation of your television.

•ALWAYS read and follow all instructions for proper use of your television.

•NEVER allow children to climb on or play on the television or the furniture on which the television is placed.

•NEVER place the television on furniture that can easily be used as steps, such as a chest of drawers.

•ALWAYS install the television where it cannot be pushed, pulled over or knocked down.

•ALWAYS route cords and cables connected to the television so that they cannot be tripped over, pulled or grabbed.

CE.org/safety

WALL OR CEILING MOUNT YOUR TELEVISION

•ALWAYS contact your retailer about professional installation if you have any doubts about your ability to safely mount your television.

•ALWAYS use a mount that has been recommended by the television manufacturer and has a safety certification by an independent laboratory (such as UL, CSA, ETL).

•ALWAYS follow all instructions supplied by the television and mount manufacturers.

•ALWAYS make sure that the wall or ceiling where you are mounting the television is appropriate. Some mounts are not designed to be mounted to walls and ceilings with steel studs or cinder block construction. If you are unsure, contact a professional installer.

•Televisions can be heavy. A minimum of two people is required for a wall or ceiling mount installation.

MOVING AN OLDER TELEVISION TO A NEW PLACE IN YOUR HOME

•Many new television buyers move their older CRT televisions into a secondary room after the purchase of a flat-panel television. Special care should be made in the placement of older CRT televisions.

•ALWAYS place your older CRT television on furniture that is sturdy and appropriate for its size and weight.

•NEVER place your older CRT television on a dresser where children may be tempted to use the drawers to climb.

•ALWAYS make sure your older CRT television does not hang over the edge of your furniture.

4 English

Important Safety Instructions

1.Read these instructions.

2.Keep these instructions.

3.Heed all warnings.

4.Follow all instructions.

5.Do not use this apparatus near water.

6.Clean only with dry cloth.

7.Do not block any ventilation openings. Install in accordance with the manufacturer’s instructions.

8.Do not install near any heat sources such as radiators, heat registers, stoves, or other apparatus (including amplifiers) that produce heat.

9.Do not defeat the safety purpose of the polarized or grounding type plug.A polarized plug has two blades with one wider than the other.A grounding type plug has two blades and a third grounding prong.The wide blade or the third prong are provided for your safety. If the provided plug does not fit into your outlet, consult an electrician for replacement of the obsolete outlet.

10.Protect the power cord from being walked on or pinched particularly at plugs, convenience receptacles, and the point where they exit from the apparatus.

11.Only use attachments / accessories specified by the manufacturer.

12.Use only with the cart, stand, tripod, bracket, or table

specified by the manufacturer, or sold with the apparatus.When a cart is used, use caution when moving the cart / apparatus combination to avoid injury from tip-over.

13.Unplug this apparatus during lightning storms or when unused for long periods of time.

14.Refer all servicing to qualified service personnel. Servicing is required when the apparatus has been damaged in any way, such as power-supply cord or plug is damaged, liquid has been spilled or objects have fallen into the apparatus, the apparatus has been exposed to rain or moisture, does not operate normally, or has been dropped.

Note to the CATV system installer:

This reminder is provided to call the CATV system installer’s attention to Article 820-40 of the NEC that provides guidelines for proper grounding and, in particular, specifies that the cable ground shall be connected to the grounding system of the building, as close to the point of cable entry as practical.

Example ofAntenna Grounding as per NEC − National Electric Code

	GROUND CLAMP	ANTENNA LEAD INWIRE
		ANTENNA DISCHARGE
		UNIT (NEC SECTION 810-20)
		GROUNDING CONDUCTORS
		(NEC SECTION 810-21)
		GROUND CLAMPS
	ELECTRIC SERVICE	POWER SERVICE GROUNDING
		ELECTRODE SYSTEM
	EQUIPMENT
		(NECART 250,PART H)

Wall Mount Bracket Kit						Funai is not liable for these types of accidents or injury noted below.
		Brand	Model #		Screw dimension	•	Install theWall Mount Bracket on a sturdy vertical wall.
						• If installed onto a ceiling or slanted wall, theTV andWall Mount
					M4 x 1.181” (30mm)
	LF320EM4 A	SANUS	SAN18B				Bracket may fall which could result in a severe injury.
					with spacer	• Do not use screws that are longer or shorter than their specified
	• The recommendedWall Mount Bracket Kit (sold separately)						length. If screws too long are used this may cause mechanical or
							electrical damage inside theTV set. If screws too short are used
	allows the mounting of theTV on the wall.
							this may cause theTV set to fall.
	• For detailed information on installing the wall mount, refer to the
						• Do not fasten the screws by excessive force.This may damage
	Wall Mount Instruction Book.						the product or cause the product to fall, leading to an injury.
	• Funai is not responsible for any damage to the product or injury					•
							For safety reasons use 2 people to mount theTV onto aWall
	to yourself or others if you elect to install theTVWall Mount
							Mounting Bracket.
	Bracket or mount theTV onto the Bracket on your own.					•
							Do not mount theTV onto theWall Mounting Bracket while
	• TheWall Mount Bracket must be installed by experts.
							yourTV is plugged in orTurned On. It may result in an electrical
							shock injury.
						When installing the unit on the wall,allow this much space.
							Top:	11.8 inches (30cm)
							Left and right side:	5.9 inches (15cm)
							Bottom:	3.9 inches (10cm)

1 Notice

EMERSON and the G-CLEF logo are registered trademarks of Emerson Radio Corp. in the U.S. and Canada, used under license by Funai Electric Co., Ltd. and Funai Corporation, Inc.

Funai reserves the right to change products at any time without being obliged to adjust earlier supplies accordingly.

The material in this Owner’s Manual is believed adequate for the intended use of the system. If the product or its individual modules or procedures are used for purposes other than those specified herein, confirmation of their validity and suitability must be obtained. Funai warrants that the material itself does not infringe any United States patents. No further warranty is expressed or implied.

Funai cannot be held responsible neither for any errors in the content of this document nor for any problems as a result of the content in this document. Errors reported to Funai will be adapted and published on the Funai support website as soon as possible.

Pixel characteristics

This LCD product has a high number of color pixels.Although it has effective pixels of 99.999% or more, black dots or bright points of light (red, green or blue) may appear constantly on the screen.This is a structural property of the display (within common industry standards) and is not a malfunction.

Warranty

No components are user serviceable. Do not open or remove covers to the inside of the product. Repairs may only be done by Service Centers and official repair shops. Failure to do so shall void any warranty, stated or implied.

Any operation expressly prohibited in this Owner’s Manual, any adjustments or assembly procedures not recommended or authorized in this Owner’s Manual shall void the warranty.

Federal Communications Commission Notice

This equipment has been tested and found to comply with the limits for a Class B Digital device,pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation.This equipment generates,uses and can radiate radio frequency energy and,if not installed and used in accordance with the instructions,may cause harmful interference to radio communications.However,there is no guarantee that interference will not occur in a particular installation.If this equipment does cause harmful interference to radio or television reception,which can be determined by turning the equipment off and on,the user is encouraged to try to correct the interference by one or more of the following measures:

•Reorient or relocate the receiving antenna.

•Increase the separation between the equipment and the receiver.

•Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.

•Consult the dealer or an experienced radio or television technician for help.

Declaration of Conformity

Trade Name :	Emerson
Responsible Party : FUNAI CORPORATION, Inc.
Model :	LF320EM4 A
Address :	19900	Van Ness Avenue, Torrance, CA
	90501	U.S.A.

Telephone Number : 1 866 309 8819

5 English

Modifications

This apparatus may generate or use radio frequency energy. Changes or modifications to this apparatus may cause harmful interference unless the modifications are expressly approved in the Owner’s Manual.

The user could lose the authority to operate this apparatus if an unauthorized change or modification is made.

Cables

Connections to this device must be made with shielded cables with metallic RFI / EMI connector hoods to maintain compliance with FCC Rules and Regulations.

Canadian notice

CAN ICES-3 (B)/NMB-3 (B)

StandardTelevision ReceivingApparatus,Canada BETS-7 / NTMR-7.

Copyright

All other registered and unregistered trademarks are the property of their respective owners.

The terms HDMI and HDMI High-Definition Multimedia Interface, and the HDMI Logo are trademarks or registered trademarks of HDMI Licensing LLC in the United States and other countries.

Manufactured under license from Dolby Laboratories. Dolby and the double-D symbol are trademarks of Dolby Laboratories.

ENERGY STAR® is a joint program of the U.S. Environmental Protection Agency and the U.S. Department of Energy helping us all save money and protect the environment through energy efficient products and practices.

Consumer Notice:

ThisTV has been set to maximize energy efficiency while delivering the best possible picture using the factory installed home mode settings. Changing or enabling other features in thisTV (e.g. brightened backlighting) will possibly increase energy consumption beyond the original ENERGY STAR® qualified limits.

Portions of this software are copyright ©The FreeType Project (www.freetype.org).

TheAmericanAcademy of Pediatrics discourages television viewing for children younger than two years of age.

© 2013 Funai Electric Co., Ltd.All rights reserved.

No part of this Owner’s Manual may be reproduced, copied, transmitted, disseminated, transcribed, downloaded or stored in any storage medium, in any form or for any purpose without the express prior written consent of Funai. Furthermore, any unauthorized commercial distribution of this Owner’s Manual or any revision hereto is strictly prohibited.

2 Important

Positioning the TV

•Large screenTVs are heavy. 2 people are required to carry and

handle a large screenTV.

•Make sure to hold the upper and bottom

frames of the unit firmly as illustrated.

•Install the unit in a horizontal and stable position.

•Do not install the unit in direct sunlight

or in a place subject to dust or strong vibration.

•Depending on the environment, the temperature of this unit may increase slightly.This is not a malfunction.

•Avoid a place with drastic temperature changes.

•Do not place anything directly on top or bottom of the unit.

•Depending on your external devices, noise or disturbance of the picture and / or sound may be generated if the unit is placed too close to them. In this case, please ensure enough space between the external devices and the unit.

•Do not insert the AC power cord into the power socket outlet before all the connections are made.

•Ensure that you always have easy access to the AC power cord or

plug to disconnect theTV from the power.

•Before you move theTV, disconnect attached cables to prevent damage to connectors.

•Be sure to unplug the AC power cord from the AC outlet before moving or carrying the unit.

Regulatory Notices

Do not place the unit on the furniture that is capable of being tilted by a child and an adult leaning,pulling,standing or climbing on it. A falling unit can cause serious injury or even death.

This apparatus should not be placed in a built-in installation such as a bookcase or rack unless proper ventilation is provided.

Make sure to leave a space of 4 inches (10cm) or more around this apparatus.

Pressto turn the unit on and go into standby mode.

To completely turn Off the unit,you must unplug theAC power cord. Disconnect theAC plug to shut the unit off when trouble is found or not in use.TheAC plug shall remain readily available.

AC plug

Never use a gas duster on thisTV.

The gas trapped inside of this unit may cause ignition and explosion.

6 English

CAUTION: Danger of explosion if battery is incorrectly replaced. Replace only with the same or equivalent type.

WARNING: Batteries (battery pack or battery installed) shall not be exposed to excessive heat such as sunshine, fire or the like.

WARNING: To prevent injury, this apparatus must be securely attached to the furniture / wall in accordance with the instructions.Tipping, shaking, or rocking the unit may cause injury / death.

Environmental Care

The packaging of this product is intended to be recycled.

Contact your local authorities for information about how to recycle the packaging.

For product recycling information, please visit -

www.emersonaudiovideo.com

Click on

End of life directives

Emerson pays a lot of attention to produce environmental-friendly products in green focal areas.Your newTV contains materials which can be recycled and reused.At the end of its life, specialized companies can dismantle the discardedTV to concentrate the reusable materials and to minimize the amount of materials to be disposed of. Please ensure you dispose of your oldTV according to local regulations.

Disposal of used batteries

The batteries supplied do not contain the heavy metals mercury and cadmium.Nevertheless,in many areas batteries may not be disposed of with your household waste.Please ensure you dispose of batteries according to local regulations.

Preparing to Move/Ship Unit

Please pack the unit properly by following the diagram on the carton.

1

2

3

4

To avoid damage to the screen, do not pack the stand on the side of theTV screen.

3 Get started

Features

•DTV / Analog TV / CATV

You can use your Remote Control to select channels which are broadcast in Digital format and conventional Analog format. Also, cable and satellite subscribers can access their TV channels.

•Information display

You can display the title, contents (DTV only) and other information of the current program on the TV Screen.

•Autoprogram

This unit automatically scans and memorizes channels available in your area, eliminating difficult setup procedures.

•Child lock

This feature allows you to Block children’s access to inappropriate programs.

•Closed Caption decoder

Built-in Closed Caption decoder displays text for Closed Caption supported programs.

•MTS / SAP tuner

Audio can be selected from the Remote Control.

•Auto Standby

If there is no Input signal and no operation for 15 minutes, the unit will go into Standby mode automatically.

•Sleep timer

You can set the unit to go into Standby mode after a specific amount of time.

•Choices for on-screen language

Select your On-screen language: English, Spanish or French.

•Stereo sound function

•PLL frequency synthesized tuning

Provides free and easy channel selection and lets you tune directly to any channel using the number and decimal point “•” keys on the Remote Control.

•Various adjustment for picture and sound

Customizes image quality suitable for your room and sets your sound preference.

•fun-Link via HDMI link

fun-Link allows your other HDMI link devices to be controlled by the HDMI cable connected to your TV.

•HDMI Input

•DVI-HDMI Input

If your video device has a DVI Output jack, use a DVI-HDMI conversion cable to connect the unit.

•Component Video Input

•PC Input

Input from a Computer.

•AV Input

Audio and Video Input from an external device.

•USB terminal

The picture (JPEG) and video (Motion JPEG) files stored on a USB Memory Stick can be played back on this unit.

•Digital Audio Output

Digital Audio (Supporting Dolby Digital) sent to Home Theaters and other Digital Audio systems.

•Headphone Audio Output

Headphone 3.5mm stereo jack for personal listening.

7 English

Supplied accessories

Owner’s Manual						Quick Start guide

Remote Control and TV base and screws batteries

(AAA, 1.5V x 2)

Screws packed with this unit.

		Model	Quantity	Size
		LF320EM4 A	3	M4 x 0.551”(14mm)
AAA	AAA

Note(s)

•If you lose the screws, please purchase the above-mentioned Phillips head screws at your local store.

•If you need to replace these accessories, please refer to the part name or No. with the illustrations and call our toll free customer support line found on the cover of this Owner’s Manual.

When using a Universal Remote Control to operate this unit.

•Make sure the component code on your universal remote control is set to our brand. Refer to the instruction book accompanying your remote control for more details.

•We do not guarantee 100% interoperability with all universal remote controls.

Symbols used in this Owner’s Manual

The following is the description for the symbols used in this Owner’s Manual. Description refers to:

Digital TV operation Analog/Cable TV operation

•If neither symbol appears, the operation is applicable to both.

Continued on next page.

Attaching the base

You must attach the base to the unit to have it as a table top unit. Be sure the front and rear of the base match the proper direction.

For large screen TVs, at least 2 people are required for these steps.

1

2

1

2

× 3

Note(s)

•Make sure to use a table which can support the weight of this unit and is larger than this unit.

•Make sure the table is in a stable location.

•When attaching the base, ensure that “FRONT” with “arrow” written on the bottom of the base is downward. If it’s not downward, the 2 hooks don’t fit into the base.

•When attaching the base, ensure that all screws are tightly fastened. If the base is not properly attached, it could cause the unit to fall, resulting in injuries as well as damage to the unit.

•To remove the base from this unit, unscrew the Phillips head screws in step 2. Be careful not to drop the base when you remove it.

8 English

Mounting the Unit on your furniture

Screw this unit on your furniture tightly using a wood screw (not supplied) in the hole at the back of the base as shown.

•Recommended screw dimension : 3/16 x 3/4 inches (5.1 x 20 mm)

rear of this unit

screw hole

Note(s)

•When you remove this unit make sure to unscrew the wood screw from your Wood Stand, Furniture and other wood item.

Installing the Remote Control batteries

1 Slide the battery cover off the back of the Remote Control.

2 Insert the 2 supplied batteries (AAA, 1.5V). Be sure the + and ñ ends of the batteries line up with the markings inside the case.

3 Slide the cover back into position.

Note(s)

• Remove the batteries if not using the Remote Control for an extended period of time.

Continued on next page.

9 English

		a	(POWER)
	Remote Control
			Turns the TV On from Standby or Off to Standby.

b PIC/SOUND MODE

		j		Optimizes Picture and Sound quality.
	a	k	c FREEZE
	b			Freezes Screen image for 5 minutes.
			d	0 ñ 9 (NUMBER keys)
	c	l
				Used to enter a Channel / Program number.
	d			• (DOT) Use with 0-9 to select digital channels. For example, to
				enter 2.1, press
				PREV.CH Returns to the previously viewed Channel.
	e			CH + / ñ Selects a Channel.
	f		e	SAP
				Selects Audio mode (MONO/STEREO/SAP) / Audio language.
			f VOL + / ñ
	g			Adjusts the Volume.
	h	m	g	(MUTE)
		n		Turns the Sound On and Off.
			h	BACK
	i			Returns to the previous Menu operation.
			i ɼɾɿɽ (NAVIGATION keys) / OK
				Moves the cursor, Selects the On-screen Menu items.
			j SOURCE
				Selects Connected devices.
			k SLEEP
				Sets Sleep Timer.
			l PICTURE SIZE
				Adjusts the Picture size on the TV screen.
			m INFO
				Displays Information about the current program.
			n MENU
				Opens the Main On-screen Menu.

Continued on next page.

Control panel

g f

a b c d e

Terminals

l

h	m
i	n
j

ko

10 English

aVOL ɿ/ɽ

Adjusts the Volume. VOL ɿ : Volume Down VOL ɽ : Volume Up

In the Menu screen, moves the Cursor Left (ɿ) / Right (ɽ).

bCH ɼ/ɾ

Selects a Channel. In the Menu screen, moves the Cursor Up (ɼ) /Down (ɾ).

cMENU

Opens the Main On-screen Menu.

dSOURCE

Selects Connected devices.

e(POWER)

Turns the TV On and Off.

fRemote Control Sensor

Receives IR signal from Remote control.

gPower On / Standby Indicator

(On : no light, Standby : red)

hUSB Terminal

Data Input from USB Memory Stick only.

Do not connect any device to this terminal such as; Digital Camera, Keyboard, Mouse, etc.

iAnalog Audio (L/R) Input jacks

Connect Analog Audio signals from;

–DVI-HDMI / Analog Audio (L/R) jacks signal

–Component Video / Analog Audio (L/R) jacks signal

–Composite Video / Analog Audio (L/R) jacks signal

–PC Connection / Analog Audio (L/R) jacks signal with Stereo mini 3.5mm plug Audio cable on PC

jDigital Audio Output jack

Digital Audio (S/PDIF) Output to Home Theaters and other Digital Audio systems.

kHDMI Input jack(s)

Digital Audio and Video Input from High Definition Digital devices such as DVD / Blu-ray disc players, Cable / Satellite Set-top boxes and PC’s.

l75 ohm Cable / Antenna connection

Signal Input from an Antenna or Cable / Satellite Set-top boxes.

mHeadphone Audio Output jack

Headphone 3.5mm Stereo jack for personal listening.

nComponent (Y/Pb/Pr) / Composite Video (VIDEO) Input jacks for VIDEO

Composite Video Input (VIDEO) jack is a shared jack with Component Video Input (Y) jack.

oPC Input jack

VGA cable connection for PC.

Continued on next page.

Connecting the Antenna, Cable or Satellite

Be sure your Antenna or other Device is connected properly before plugging in the AC Power cord.

If connecting to an Antenna through an RF cable

Any DTV programs that are broadcasted in your area can be received for free through an antenna connection.

antenna	cable

IN

OUT

RF cable

If you connect a Set-top Box through an RF cable

If the TV is connected to a Cable / Satellite Set-top Box via a Coaxial connection, set the TV to channel 3/4 or the Channel specified by the service provider.

antenna	RF cable
IN	IN
RF cable	OUT
	Set-top box

If connecting a Set-top Box through an HDMI cable

If the TV is connected to a Cable / Satellite Set-top Box via an HDMI cable, make sure you select the correct Source by using SOURCE.

RF cable

		IN
IN		OUT
	HDMI cable	Set-top box

If connecting a Set-top Box through Component Video Input
If the TV is connected to a Cable / Satellite Set-top box via Component
Video Input, make sure you select the correct Component Video Source
by using SOURCE.
			RF cable
Audio (L/R) cables		OUT
			IN
IN	Component (Y/Pb/Pr)	OUT	Set-top box
IN	video cables

11 English

Connecting a Set-top Box, Blu-ray disc / DVD Recorder via Composite connectors and Analog Audio

Do not place your recorder too close to the screen because some recorders can be susceptible to signals.

		OUT		cable
		RF cable	IN	Set-top box
				OUT
		RF cable	OUT	Audio (L/R) +
				Video cables
IN	IN	OUT		IN
	Audio (L/R) + Video cables
			Blu-ray disc/DVD recorder

Note(s)

•If you have any question about the DTV’s antenna, visit www.antennaweb.org for further information.

•Depending on your antenna system, you may need different types of combiners (mixers) or separators (splitters) for HDTV signal. The minimum RF bandpass on these devices is 2,000MHz or 2GHz.

•For your safety and to avoid damage to this unit, please unplug the RF coaxial cable from the Antenna Input jack before moving the unit.

•If you did use an Antenna to receive Analog TV, it should also work for DTV reception. Outdoor or Attic Antennas will be more effective than a Set-top box or Inside Antenna.

•To Turn On your reception source easily between Antenna and Cable, install an Antenna Selector.

•If you are not receiving a signal from your cable service, contact the Cable provider.

•Only the left loudspeaker reproduces sound for mono equipment. Use a mono to stereo adapter (not supplied) for sound reproduction via all internal loudspeakers.

Plugging in the AC Power cord

Make sure all the necessary connections are made before the AC Power cord is plugged into an AC outlet.

Caution

•Do not connect the AC Power cord to an AC power supply outside the indicated voltage of this unit (120V AC).

•Connecting the AC Power cord to a power supply outside of this range may result in unit failure, degradation or electrical shock.

Note(s)

•Each time you plug in the AC Power cord, no operations will be performed for several seconds. This is not a malfunction.

Continued on next page.

No supplied cables are used with these connections:

• Please purchase the necessary cables at your local store.

Before you connect the AC Power cord:

Be sure other devices are connected properly before plugging in the AC power cord.

Selecting your connection quality

HDMI - Highest quality

Supports high-definition Digital signals and gives highest picture and sound quality. Video and Audio signals are combined in one cable.

You must use HDMI for full high-definition video and to enable fun-Link (HDMI CEC).

Note(s)

•Emerson HDMI supports HDCP (High-bandwidth Digital Contents Protection). HDCP is a form of Digital Rights Management that protects high definition content in Blu-ray discs or DVDs.

Component (Y Pb Pr) - High quality

Supports high-definition Analog signals but gives lower picture quality than HDMI. Component (Y/Pb/Pr) Video cables combine red / green / blue video cables with red / white audio (L/R) cables. Match the cable colors when you connect to the TV.

Composite - Basic quality

For analog connections. Composite Video / Audio Analog cable usually combine a yellow video cable with red / white audio (L/R) cables. With this unit, yellow cable must be connected to Y (green) jack of Component Video Input jacks.

12 English

Connecting your devices

HDMI Digital connection

HDMI connection offers the highest picture quality.

HDMI (High-Definition Multimedia Interface) transports high definition Digital Video and multi-channel Digital Audio through a single cable.

Set-top Box

or

Blu-ray disc player or

IN

OUT

HDMI cable

HD game console

DVI-HDMI connection

This unit can be connected to your device that has a DVI terminal. Use a DVI-HDMI conversion cable for this connection and it requires Audio Cable for Analog Audio signal as well.

IN		OUTOUT	Cable Receiver or
	Audio (L/R) cables		Satellite box with the
			DVI Output jack

IN DVI-HDMI conversion cable OUT

Note(s)

•Use an HDMI cable with the HDMI logo (a certified HDMI cable). High Speed HDMI cable is recommended for the better compatibility.

For HDMI connection

•The unit accepts 480i / 480p / 720p / 1080i, 1080p 24/30/60Hz of Video signals, 32kHz / 44.1kHz and 48kHz of Audio signals.

•This unit accepts 5.1 channel Audio signal (Dolby Digital) and 2 channel Audio signal (LPCM).

•This unit accepts only signals in compliance with EIA861.

For DVI-HDMI connection

•The unit accepts 480i, 480p, 720p, 1080i and 1080p Video signals.

•DVI-HDMI connection requires separate audio connections as well and the Audio signals are output as Analog (L/R) Audio.

•DVI does not display 480i image which is not in compliance with EIA/CEA-861/861B.

Continued on next page.