™ |
|
|
|
|
|
Project __________________________________ |
DELFIELD |
® |
|
|
|
||
|
|
|
|
Item ____________________________________ |
||
|
|
|
|
|
|
Quantity ________________________________ |
Speciication Line® |
|
|
CSI Section 11400 |
|||
|
|
Date ____________________________________ |
||||
|
|
|
|
|
|
Approved _______________________________ |
Self-Contained Glass Door Heated Roll-In |
|
|
|
|||
|
|
|||||
|
|
|
|
|
|
|
Models |
|
|
|
|
|
|
One section |
Two section |
Three section |
|
|
|
|
SSHRI1-G |
SSHRI2-G |
SSHRI3-G |
Stainless exterior and interior glass full door |
|
||
SAHRI1-G SAHRI2-G |
N/A |
Stainless exterior and aluminum interior glass full door |
|
|||
SMHRI1-G |
SMHRI2-G |
N/A |
Stainless front aluminum exterior and interior glass full door |
|
Standard Features
|
• Stainless steel interior and exterior (SS) |
|
|
• Stainless steel exterior, aluminum |
|
|
interior (SA) |
|
|
• Aluminum interior and exterior, |
|
|
stainless front (SM) |
|
|
• Built in door locks with heavy duty |
|
|
strikes |
|
|
• Exterior digital thermometer with high/ |
|
|
low temperature alarm |
|
|
• Easy to use electronic control |
|
|
• Easy access “lip up” shroud |
|
|
• High density foamed in place |
|
|
environmentally friendly, Kyoto |
|
|
Protocol Compliant, Non ODP (Ozone |
|
|
Depletion Potential), Non GWP (Global |
|
|
Warming Potential) polyurethane keeps |
|
|
energy costs low |
|
SSHRI1-G |
• Stainless steel breaker strips |
|
• Stainless steel interior door liner |
||
|
||
|
• Two year parts & labor warranty |
|
|
Options &
Accessories
•Security (prison) package
•Incandescent light
•Door ield rehingability
•Stainless steel back
•Laminate on front, sides and back
•Bottom mount electrical
•Stainless steel banking strip
•Heat shield end
Specifications
Exterior: SS and SA models shall have corrosion resistant stainless steel exterior cabinet sides, front and shroud. SM models shall have corrosion resistant aluminum on exterior cabinet sides and will have stainless front and shroud. All units shall have the upper shroud hinged with a gas assist stay open feature to provide easy access to the refrigeration system.
Interior: Cabinet interior shall be corrosion resistant stainless steel (SS models) or heavy gauge aluminum (SA and SM models). Bottom and top surfaces shall be die stamped to provide radius corners and recessed loor. Mounted to the interior ceiling, the interior luorescent light is controlled automatically through a switch mounted in the hinge assembly to protect against breakage. Door openings are protected with heavy gauge stainless steel breaker strips. An air
duct shall be mounted to the ceiling assuring low velocity, even air movement throughout the cabinet interior.
Each section can accommodate a 28 1/2” x 27 1/4” x 72” cart.
Doors: Double paned tempered thermopane glass. Constructed with a combination of extruded aluminum and PVC. Each door has two edgemount, self-closing, cam lift style hinges. Doors can be removed from the cabinet without the use of tools. Door handle is continuous
along vertical dimension of the door. Door gaskets are magnetic and mount to the door, snapping in place and removable with out tools. Keyed door lock is mounted to the door. Lock engages into a heavy duty strike mounted to the cabinet face.
Heating system: Cabinets are designed to maintain temperatures between 120ºF and 200ºF. Heating elements are helical shaped, with tubular ins. High speed blower provides uniform airlow in the cabinet. Entire heating system is mounted to the exterior of the cabinet ceiling, outside the food zone. It is assembled as one piece and can be removed as one piece. Temperature is controlled by an adjustable electronic thermostat. System on/of switch is located on the front exterior of the cabinet.
Electrical: Standard electrical is 120/208-240 Volt, 60 Hz single phase. Connection must be hard wired to junction box on the exterior top of the cabinet.
980 S. Isabella Rd. |
Phone: 800-733-8948 or 989-773-7981 |
|
|
Mt. Pleasant, Michigan 48858 |
www.delfield.com |
||
Fax: 800-669-0619 |
|||
|
|
||
|
|
|
<![endif]>In-Roll Heated Door Glass Line®: Speciication