Owner’s Manual
Concept 7400 Kitchen Machines for model:
MUM 7400 UC
READ THIS MANUAL
thoroughly for important safety and operating instructions before using this appliance.
1
IMPORTANT SAFEGUARDS
WARNING: A risk of fire and electrical shock exists in all electrical appliances and may cause personal injury or death.
When using electrical appliances, basic safety precautions should always be followed, including the following:
1.Read all instructions before using the kitchen machine.
2.To protect against risk of electric shock, do not put the drive unit in or under water or other liquid.
3.This appliance is not for use by children.
4.Close supervision is necessary when any appliance is used near children.
5.Do not leave appliances unattended during operation.
6.Unplug from outlet when not in use, before putting on or taking off parts and before cleaning.
7.To disconnect: switch appliance off then remove plug from power supply.
8.Avoid contacting moving parts. Keep hands, hair, clothing, as well as spatulas and other utensils away from whisks, beaters, blades, disc, dough hook and/or other moving parts during operation to reduce the risk of injury to persons and/or damage to the appliance or its attachments.
9.Do not operate any appliance with a damaged cord or plug, or after the appliance malfunctions or is dropped or damaged in any manner. Return appliance to the nearest authorized service facility for examination, repair or electrical or mechanical adjustment.
10.The use of attachments not recommended or sold by the appliance manufacturer may cause fire, electric shock or injury and is therefore prohibited.
11.Do not use outdoors or when standing in a damp area.
12.Do not let cord hang over edge of table or counter, or touch hot surfaces.
13.Always operate appliance with covers in place.
14.Blades are sharp. Handle carefully due to risk of injury.
15.Remove beaters from mixing bowl before washing.
NOTE: ALSO BE SURE TO READ THE WARNINGS AND CAUTIONS THAT ARE PROVIDED BEFORE EACH ATTACHMENT’S OPERATING INSTRUCTION.
SAVE THESE INSTRUCTIONS
2
TABLE OF CONTENTS |
|
IMPORTANT SAFEGUARDS .................................................................. |
2 |
Table of contents ..................................................................................... |
3 |
ABOUT YOUR KITCHEN MACHINE ....................................................... |
4 |
The Concept 7400 ................................................................................... |
4 |
Unpacking ............................................................................................... |
4 |
Electrical specifications ............................................................................ |
4 |
Before using for the first time .................................................................. |
5 |
Getting to know your Bosch Kitchen Machine ......................................... |
5 |
Special accessories ..................................................................... |
5 |
Power unit features .............................................................................. |
5-7 |
Getting started ..................................................................................... |
7-9 |
STANDARD ATTACHMENTS .................................................................. |
9 |
Mixing bowl w/twin beating whisks and dough hook .......................... |
9-10 |
How to use dough hook ......................................................... |
10-11 |
Placing into operation with dough hook ....................................... |
11 |
How to use twin beating whisks .................................................. |
11 |
Operation with dough hook and whisk assembly.......................... |
12 |
Use of mixing bowl with twin beating whisks ............................... |
13 |
Placing into operation with twin beating whisks .......................... |
14 |
Care and cleaning of bowl and its accessories ........................... |
15 |
Stainless steel blender ............................................................................ |
15 |
How to use blender ...................................................................... |
15 |
Placing blender into operation ...................................................... |
16 |
Example of use of blender ........................................................... |
16 |
Care and cleaning of blender........................................................ |
17 |
SERVICE and REPAIR .......................................................................... |
18 |
TROUBLESHOOTING ................................................................. |
18 |
SAMPLE RECIPES .......................................................................... |
19-20 |
SPECIAL ACCESSORIES ..................................................................... |
21 |
Important Notes ..................................................................................... |
22 |
BOSCH Small Appliance Warranty ......................................................... |
23 |
HOUSEHOLD USE ONLY |
|
3
ABOUT YOUR KITCHEN MACHINE
Congratulations on having selected the Bosch Concept 7400 Kitchen Machine — the finest interpretation of the Concept Series of kitchen machines that we and— thankfully—cooking professionals the world over, feel are the best household-type kitchen machines available.
As you read through these instructions, please pay particular attention to the IMPORTANT SAFEGUARDS. Specific safeguards for the attachments, as well as warnings and cautions, are provided in each section describing the operation of that particular attachment.
The Concept 7400
The MUM 7400 UC stainless steel kitchen machine includes the following components, see figure 1:
a.MUM 7400 UC stainless steel, electronic power unit
b.Six-quart capacity stainless steel mixing bowl (MUZ 7 ER1) with cover with integral filling tube and filling funnel/ cap.
c.Dough hook
d.Twin beating whisks
e.Six-cup capacity stainless steel blender (MUZ 7 MX3)
f.Motor drive cover
Unpacking
Carefully remove the power unit from its packaging and place it on the counter so it is ready to use. As you remove the accessories from the carton, check them against figure 1 to assure that all the standard parts are present.
Electrical Specifications
Check to make sure that the voltage on which your Concept 7400 is to operate is the same as specified on the rating plate. Standard North American models have an
Figure 1.
4
Loading...