KBE and KBN Series
Prepackaged Cameras
en Instruction Manual
KBE and KBN Series |
Table of Contents | en |
iii |
|
|
|
|
|
Table of Contents |
|
|
|
|
|
|
|
1 |
Safety |
|
1 |
1.1 |
Important Safety Instructions |
|
1 |
1.2 |
Safety Precautions |
|
4 |
1.3 |
Important Notices |
|
5 |
1.4 |
Customer Support and Service |
|
13 |
|
|
|
|
2 |
Unpacking |
|
15 |
2.1 |
Parts List |
|
15 |
|
|
|
|
3 |
Description |
|
15 |
3.1 |
Model Summary |
|
15 |
|
|
|
|
4 |
Installation |
|
16 |
4.1 |
Operating Voltage |
|
16 |
4.2 |
Preparing the Unit |
|
16 |
4.3 |
Preparing the Mount |
|
16 |
4.4 |
Housing |
|
16 |
4.5 |
Line Power and Video Signal Connection |
|
16 |
4.6 |
Connections for U Suffix, F Suffix, and N Suffix |
17 |
|
4.6.1 |
U (Twisted Pair) Suffix Connections |
|
17 |
4.6.2 |
Wiring Do’s |
|
18 |
4.6.3 |
Wiring Don’ts |
|
18 |
4.6.4 |
F (Fiber Optic) Suffix Connections |
|
19 |
4.6.5 |
N (Network) Suffix Connections |
|
21 |
|
|
|
|
5 |
Camera Lens Adjustment |
|
23 |
|
|
|
|
6 |
Sunshield |
|
24 |
|
|
|
|
7 |
Model Numbers and System Specifications |
24 |
|
Bosch Security Systems, Inc. |
Instruction Manual |
F01U078718 | 2.0 | 2008.01 |
iv en | Table of Contents |
KBE and KBN Series |
|
|
F01U078718 | 2.0 | 2008.01 |
Instruction Manual |
Bosch Security Systems, Inc. |
KBE and KBN Series |
Safety | en 1 |
|
|
1 Safety
1.1Important Safety Instructions
Read, follow, and retain for future reference all of the following safety instructions. Heed all warnings on the unit and in the operating instructions before operating the unit.
1.Cleaning - Unplug the unit from the outlet before cleaning. Follow any instructions provided with the unit. Generally, using a dry cloth for cleaning is sufficient, but a moist flufffree cloth or leather shammy may also be used. Do not use liquid cleaners or aerosol cleaners.
2.Heat Sources - Do not install the unit near any heat sources such as radiators, heaters, stoves, or other equipment (including amplifiers) that produce heat.
3.Ventilation - Any openings in the unit enclosure are provided for ventilation to prevent overheating and ensure reliable operation. Do not block or cover these openings. Do not place the unit in an enclosure unless proper ventilation is provided, or the manufacturer's instructions have been adhered to.
4.Water - Do not use this unit near water, for example near a bathtub, washbowl, sink, laundry basket, in a damp or wet basement, near a swimming pool, in an outdoor installation, or in any area classified as a wet location. To reduce the risk of fire or electrical shock, do not expose this unit to rain or moisture.
5.Object and liquid entry - Never push objects of any kind into this unit through openings as they may touch dangerous voltage points or short-out parts that could result in a fire or electrical shock. Never spill liquid of any kind on the unit. Do not place objects filled with liquids, such as vases or cups, on the unit.
6.Lightning - For added protection during a lightning storm, or when leaving this unit unattended and unused for long periods, unplug the unit from the wall outlet and disconnect the cable system. This will prevent damage to
Bosch Security Systems, Inc. |
Instruction Manual |
F01U078718 | 2.0 | 2008.01 |
2 en | Safety |
KBE and KBN Series |
|
|
the unit from lightning and power line surges.
7.Controls adjustment - Adjust only those controls specified in the operating instructions. Improper adjustment of other controls may cause damage to the unit. Use of controls or adjustments, or performance of procedures other than those specified, may result in hazardous radiation exposure.
8.Overloading - Do not overload outlets and extension cords. This can cause fire or electrical shock.
9.Power cord and plug protection - Protect the plug and power cord from foot traffic, being pinched by items placed upon or against them at electrical outlets, and its exit from the unit. For units intended to operate with 230 VAC, 50 Hz, the input and output power cord must comply with the latest versions of IEC Publication 227 or
IEC Publication 245.
10.Power disconnect - Units with or without ON/OFF switches have power supplied to the unit whenever the power cord is inserted into the power source; however, the unit is operational only when the ON/OFF switch is in the ON position. The power cord is the main power disconnect device for switching off the voltage for all units.
11.Power sources - Operate the unit only from the type of power source indicated on the label. Before proceeding, be sure to disconnect the power from the cable to be installed into the unit.
–For battery powered units, refer to the operating instructions.
–For external power supplied units, use only the recommended or approved power supplies.
–For limited power source units, this power source must comply with EN60950. Substitutions may damage the unit or cause fire or shock.
–For 24 VAC units, voltage applied to the unit's power input should not exceed ±10%, or 28 VAC. Usersupplied wiring must comply with local electrical codes (Class 2 power levels). Do not ground the
F01U078718 | 2.0 | 2008.01 |
Instruction Manual |
Bosch Security Systems, Inc. |
KBE and KBN Series |
Safety | en 3 |
|
|
supply at the terminals or at the unit's power supply terminals.
–If unsure of the type of power supply to use, contact your dealer or local power company.
12.Servicing - Do not attempt to service this unit yourself. Opening or removing covers may expose you to dangerous voltage or other hazards. Refer all servicing to qualified service personnel.
13.Damage requiring service - Unplug the unit from the main AC power source and refer servicing to qualified service personnel when any damage to the equipment has occurred, such as:
–the power supply cord or plug is damaged;
–exposure to moisture, water, and/or inclement weather (rain, snow, etc.);
–liquid has been spilled in or on the equipment;
–an object has fallen into the unit;
–unit has been dropped or the unit cabinet is damaged;
–unit exhibits a distinct change in performance;
–unit does not operate normally when the user correctly follows the operating instructions.
14.Replacement parts - Be sure the service technician uses replacement parts specified by the manufacturer, or that have the same characteristics as the original parts.
Unauthorized substitutions may cause fire, electrical shock, or other hazards.
15.Safety check - Safety checks should be performed upon completion of service or repairs to the unit to ensure proper operating condition.
16.Installation - Install in accordance with the manufacturer's instructions and in accordance with applicable local codes.
17.Attachments, changes or modifications - Only use attachments/accessories specified by the manufacturer. Any change or modification of the equipment, not expressly approved by Bosch, could void the warranty or, in the case of an authorization agreement, authority to
operate the equipment.
Bosch Security Systems, Inc. |
Instruction Manual |
F01U078718 | 2.0 | 2008.01 |
4 en | Safety |
KBE and KBN Series |
|
|
1.2Safety Precautions
DANGER! High Risk:
This symbol indicates an imminently hazardous situation such
!as “Dangerous Voltage” inside the product.
If not avoided, this will result in an electrical shock, serious bodily injury, or death.
WARNING! Medium Risk:
!Indicates a potentially hazardous situation.
If not avoided, this could result in serious bodily injury or death.
CAUTION! Medium Risk:
!Indicates a potentially hazardous situation.
If not avoided, this may result in minor or moderate injury. Alerts the user to important instructions accompanying the unit.
CAUTION! Low risk: (without safety alert symbol) Indicates a potentially hazardous situation.
If not avoided, this may result in property damage or risk of damage to the unit.
NOTICE!
i |
This symbol indicates information or a company policy that |
|
|
|
relates directly or indirectly to the safety of personnel or |
|
protection of property. |
|
|
F01U078718 | 2.0 | 2008.01 |
Instruction Manual |
Bosch Security Systems, Inc. |
KBE and KBN Series |
Safety | en 5 |
|
|
1.3Important Notices
Accessories - Do not place this unit on an unstable stand, tripod, bracket, or mount. The unit may fall, causing serious injury and/or serious damage to the unit. Use only with the cart, stand, tripod, bracket, or table specified by the manufacturer. When a cart is used, use caution and care when moving the cart/apparatus combination to avoid injury from tip-over. Quick stops, excessive force, or uneven surfaces may cause the cart/ unit combination to overturn. Mount the unit per the manufacturer's instructions.
All-pole power switch - Incorporate an all-pole power switch, with a contact separation of at least 3 mm in each pole, into the electrical installation of the building.
If it is needed to open the housing for servicing and/or other activities, use this all-pole switch as the main disconnect device for switching off the voltage to the unit.
Camera grounding - For mounting the camera in potentially damp environments, ensure to ground the system using the ground connection of the power supply connector (see section: Connecting external power supply).
Camera lens - An assembled camera lens in the outdoor housing must comply and be tested in accordance with UL/ IEC60950. Any output or signal lines from the camera must be SELV or Limited Power Source. For safety reasons the environmental specification of the camera lens assembly must be within the environmental specification of -10 °C (14 °F) to 50 °C (122 °F).
Camera signal - Protect the cable with a primary protector if the camera signal is beyond 140 feet, in accordance with
NEC800 (CEC Section 60).
CAUTION!
!Class I Laser Product
Invisible laser radiation when open. Avoid exposure to beam.
Bosch Security Systems, Inc. |
Instruction Manual |
F01U078718 | 2.0 | 2008.01 |
6 en | Safety |
KBE and KBN Series |
|
|
Coax grounding:
–Ground the cable system if connecting an outside cable system to the unit.
–Connect outdoor equipment to the unit's inputs only after this unit has had its grounding plug connected to a grounded outlet or its ground terminal is properly connected to a ground source.
–Disconnect the unit's input connectors from outdoor equipment before disconnecting the grounding plug or grounding terminal.
–Follow proper safety precautions such as grounding for any outdoor device connected to this unit.
U.S.A. models only - Section 810 of the National Electrical Code, ANSI/NFPA No.70, provides information regarding proper grounding of the mount and supporting structure, grounding of the coax to a discharge unit, size of grounding conductors, location of discharge unit, connection to grounding electrodes, and requirements for the grounding electrode.
NOTICE!
|
|
|
i |
|
This device is intended for use in public areas only. |
||
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
U.S. federal law strictly prohibits surreptitious recording of oral |
|
|
|
|
|
|
|
communications. |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Your Bosch product was developed and manufactured with |
|
|
|
|
|
|
|
high-quality material and components that can be recycled and |
|
|
|
|
|
|
|
reused. This symbol means that electronic and electrical |
|
|
|
|
|
|
|
appliances, which have reached the end of their working life, |
|
|
|
|
|
|
|
must be collected and disposed of separately from household |
|
|
|
|
|
|
||
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
waste material. Separate collecting systems are usually in place |
|
|
|
|
|
|
|
for disused electronic and electrical products. Please dispose |
|
|
|
|
|
|
|
of these units at an environmentally compatible recycling |
|
|
|
|
|
|
|
facility, per European Directive 2002/96/EC. |
|
|
|
|
|
|
|
Environmental statement - Bosch has a strong commitment |
|
|
|
|
|
|
|
towards the environment. This unit has been designed to |
|
|
|
|
|
|
|
respect the environment as much as possible. |
|
|
|
|
|
|
|
Electrostatic-sensitive device - Use proper CMOS/MOS-FET |
|
|
|
|
|
|
|
handling precautions to avoid electrostatic discharge. |
F01U078718 | 2.0 | 2008.01 |
Instruction Manual |
Bosch Security Systems, Inc. |
KBE and KBN Series |
Safety | en 7 |
|
|
NOTE: Wear required grounded wrist straps and observe proper ESD safety precautions when handling the electrostaticsensitive printed circuit boards.
Fuse rating - For security protection of the device, the branch circuit protection must be secured with a maximum fuse rating of 16A. This must be in accordance with NEC800 (CEC Section 60).
Grounding and polarization - This unit may be equipped with a polarized alternating current line plug (a plug with one blade wider than the other blade). This safety feature allows the plug to fit into the power outlet in only one way. If unable to insert the plug fully into the outlet, contact a locally certified electrician to replace the obsolete outlet. Do not defeat the safety purpose of the polarized plug.
Alternately, this unit may be equipped with a 3-pole grounding plug (a plug with a third pin for earth grounding). This safety feature allows the plug to fit into a grounded power outlet only. If unable to insert the plug into the outlet, contact a locally certified electrician to replace the obsolete outlet. Do not defeat the safety purpose of the grounding plug.
Moving - Disconnect the power before moving the unit. Move the unit with care. Excessive force or shock may damage the unit and the hard disk drives.
Outdoor signals - The installation for outdoor signals, especially regarding clearance from power and lightning conductors and transient protection, must be in accordance with NEC725 and
NEC800 (CEC Rule 16-224 and CEC Section 60).
Permanently connected equipment - Incorporate a readily accessible disconnect device in the building installation wiring. Pluggable equipment - Install the socket outlet near the equipment so it is easily accessible.
PoE - Never supply power via the Ethernet connection (PoE) when power is already supplied via the power connector. Power disconnect - Units have power supplied whenever the power cord is inserted into the power source. The power cord is the main power disconnect for all units.
Bosch Security Systems, Inc. |
Instruction Manual |
F01U078718 | 2.0 | 2008.01 |
Loading...