FAA-325-B6S
Fire Alarm Systems | FAA‑325‑B6S Analog Sounder Base
FAA‑325‑B6S Analog Sounder Base
www.boschsecurity.com
u Sound pressure level of 85 dB at 10 ft
u Can be alarmed by zone or by host
u Base learns the detector address and adds 127 to it
(address range from 128‑254)
u Digital data communications via the attached
detector and powered over a four‑conductor circuit
The FAA‑325‑B6S Analog Sounder Base contains an
addressable sounder which provides an audible alarm
in the immediate vicinity. The sounder base only works
in combination with one of the analog detectors
(FAH‑325, FAI‑325, or FAP‑325 family) and is auxiliary
powered.
Functions
The sounder base can be configured with the desired
evacuation tone and setup into one zone.
Depending on the fire panel the following evacuation
tones can be chosen:
• Continuous / Steady
• Temporal 3
• March
Certifications and approvals
Region Certification
USA UL UROX: Smoke-automatic Fire Detectors
(ANSI/UL 268)
CSFM see our website
FDNY-
CoA
#6101
Installation/configuration notes
Compatibility
The following devices are compatible with the
FAA‑325‑B6S Analog Sounder Base:
Category Product ID Product Description
Fire Panels FPA-1000 Analog Addressable Fire Panels
Detectors FAH‑325 Analog Heat Detector
FAI‑325 Analog Ionization Smoke Detector
FAP‑325 Analog Photoelectric Smoke
Detector
FAP-325-V2F Analog Photoelectric Smoke
Detector Flat
Parts included
Quant. Component
1 FAA‑325‑B6S Analog Sounder Base
1 Literature pack
Loading...