Fire Alarm Systems | F220 B6 Conventional Detector Bases
F220 B6 Conventional Detector Bases
www.boschsecurity.com
u Easy installation
u Interchangeable detector heads
u UL listed when used with a detector from the F220 family
The F220 B6 Detector Bases work with the F220 Photoelectric Smoke and Heat Detectors. The F220 B6 is a 12 V or 24 V base for two wire loops. The other bases in this family are 12 V or 24 V bases for four wire loops.
Certifications and approvals
Region |
Certification |
|
|
|
|
USA |
UL |
UQGS: Heat - Automatic Fire Detectors |
|
|
(UL521), UROX: Smoke - Automatic Fire |
|
|
Detectors (UL268), UROX7: Smoke - |
|
|
Automatic Fire Detectors Certified for |
|
|
Canada (CAN/ULC-S529) |
|
FM |
F220-B6 Family |
|
CSFM |
see our website |
|
NYC- |
(117-05-E) |
|
MEA |
|
|
MSFM |
permit #2200 Sep 2008 |
Hong Kong |
HKFSD |
J-002/C/067 |
|
|
|
Installation/configuration notes
Compatibility Information
Two wire: Bosch Security Systems, Inc. makes no claim written, oral, or implied that the F220 B6 Detector Bases work with any two wire control panels except those specified in the Two wire Detector/ Control Panel Compatibility List Technical Service Note (P/N: 4998148185).
Four wire: Compatible with all UL Listed four wire control panels. Refer to the control panel's Installation Instructions for proper end of line (EOL) resistor selection.
Detectors: Compatible with the following F220 Series Detector Heads:
•F220 P Photoelectric Smoke Detector
•F220 PTH Photoelectric Smoke Detector with +135°F (+57°C) Heat Sensor
•F220 PTHC1 Photoelectric Smoke Detector with +135°F (+57°C) Heat Sensor and Carbon Monoxide Sensor Enhancement1
•F220 135 Electronic Rate of Rise, Fixed Temperature +135°F (+57°C) Heat Detector
•F220 135F Electronic Fixed Temperature +135°F (+57°C) Heat Detector
•F220 190F Electronic Fixed Temperature +190°F (+88°C) Heat Detector