Dear Customer,
Thank you for prefering a Beko product. We hope that you get the best results from your
product which has been manufactured with high quality and state-of-the-art technology.
Therefore, please read this entire user manual and all other accompanying documents
carefully before using the product and keep it as a reference for future use. If you
handover the product to someone else, give the user manual as well. Follow all warnings
and information in the user manual.
Remember that this user manual is also applicable for several other models. Differences
between models will be identified in the manual.
Explanation of symbols
Throughout this user manual the following symbols are used:
Important information or useful hints about
C
A
usage.
Warning for hazardous situations with
regard to life and property.
B
Warning for electric shock.
Recyclable materials.
Do not dispose of the packaging materials together with the domestic or other wastes.
Take them to the packaging material collection points designated by the local authorities.
This product was manufactured using the latest technology in environmentally friendly conditions.
TABLE OF CONTENTS
1 General safety instructions 5
1.1 Life and property safety --------------------------------------------------------------------------------- 5
4.6.14 Cancelling the programme ----------------------------------------------------------------------------------- 37
4.6.15 End of programme -------------------------------------------------------------------------------------------- 37
4.6.16 Adjusting the VOLUME level ---------------------------------------------------------------------------------- 37
4.7 Maintenance and cleaning ------------------------------------------------------------------------------ 38
4.7.1 Cleaning the detergent drawer --------------------------------------------------------------------------------- 38
4.7.2 Cleaning the loading door and the drum ----------------------------------------------------------------------- 38
4.7.3 Cleaning the body and control panel --------------------------------------------------------------------------- 39
4.7.4 Cleaning the water intake filters-------------------------------------------------------------------------------- 39
4.7.5 Draining remaining water and cleaning the pump filter -------------------------------------------------------- 40
5 Troubleshooting 42
4 / EN
Washing Machine / User’s Manual
1 General safety instructions
This section includes security instructions which may help prevent
the injuries and material damage risks. All kinds of warranties
shall be invalid if these instructions are not observed.
1.1 Life and property safety
u
Never place the product on a carpet-covered floor. Electrical parts
will get overheated since air cannot circulate from under the
device. This will cause problems with your product.
u
Unplug the product if it is not in use.
u
Always have the installation and repairing procedures carried out
by the Authorized Service Agent. Manufacturer shall not be held
liable for damages that may arise from procedures carried out by
unauthorized persons.
u
The water supply and draining hoses must be securely fastened
and remain undamaged. Otherwise, water leak may occur.
u
While there is still water inside the product, never open the loading
door or remove the filter. Otherwise, risk of flooding and injury
from hot water will occur.
u
Do not force open the locked loading door. Door can be opened a
few minutes after the washing cycle ends. In case of forcing the
loading door to open, the door and the lock mechanism may get
damaged.
u
Use detergents, softeners and supplements suitable for automatic
washing machines only.
u
Follow the instructions on the label of textiles and the detergent
package.
5 / EN
Washing Machine / User’s Manual
1.2 Children's safety
u
This product can be used by the children who are at the age of 8
and over and the people whose physical, sensory or mental skills
are not fully developed or who do not have necessary required
experience and knowledge as long as they are supervised or
trained about the safe use of the product and its risks. Children
should not play with the device. Cleaning and maintenance works
should not be performed by children unless they are supervised
by someone.
u
Packaging materials may be dangerous for the children. Keep
packaging materials in a safe place away from reach of the
children.
u
Electrical products are dangerous for the children. Keep the
children away from the product when it is in use. Do not allow
them to play with the product. Use child lock to prevent children
from intervening with the product.
u
Do not forget to close the loading door when leaving the room
where the product is located.
u
store all detergents and additives in a safe place away from
the reach of the children by closing the cover of the detergent
container or sealing the detergent package.
6 / EN
Washing Machine / User’s Manual
1.3 Electrical safety
u
If the product has a failure, it should not be operated unless it is
repaired by the Authorized Service Agent. Risk of electric shock!
u
This product is designed to resume operating in the event of
powering on after a power interruption. If you wish to cancel the
programme, see "Cancelling the programme" section.
u
Plug the product into a grounded outlet protected by a 13 A
fuse. Do not neglect to have the grounding installation made
by a qualified electrician. Our company shall not be liable for
any damages that will arise when the product is used without
grounding in accordance with the local regulations.
u
Do not wash the product by spraying or pouring water onto it! Risk
of electric shock!
u
Never touch the power cable plug with wet hands! Do not grab the
power cord to unplug the machine, always unplug it by holding
the socket with one hand, and pulling the plug with the other
hand.
u
Product should be unplugged during installation, maintenance,
cleaning and repair procedures.
u
If the power cable is damaged, it must be replaced by the
manufacturer, after sales service or a similarly qualified person
(preferably an electrician) or someone designated by the importer
in order to avoid possible risks.
1.4 Hot surface safety
7 / EN
While washing the laundry at high
temperatures, the loading door glass
will get hot. Considering this fact, during
washing operation keep the children away
from the loading door of the product to
prevent them touching it.
Washing Machine / User’s Manual
2 Important instructions for environment
2.1 Compliance with WEEE Directive
This product complies with EU WEEE Directive (2012/19/EU). This product
bears a classification symbol for waste electrical and electronic equipment
(WEEE).
This product has been manufactured with high quality parts and materials
which can be reused and are suitable for recycling. Do not dispose of the
waste product with normal domestic and other wastes at the end of its service
life. Take it to the collection center for the recycling of electrical and electronic
equipment. Please consult your local authorities to learn about these collection centers.
Compliance with RoHS Directive:
The product you have purchased complies with EU RoHS Directive (2011/65/EU). It does
not contain harmful and prohibited materials specified in the Directive.
2.2 Package information
Packaging materials of the product are manufactured from recyclable materials in
accordance with our National Environment Regulations. Do not dispose of the packaging
materials together with the domestic or other wastes. Take them to the packaging
material collection points designated by the local authorities.
3 Intended use
• This product has been designed for domestic use. It is not for commercial purposes or it
should not be used out of its intended use.
• The product must only be used for washing and rinsing of laundry that are marked
accordingly.
• The manufacturer waives any responsibility arisen from incorrect usage or
transportation.
• The service life of your product is 10 years. During this period, original spare parts will
be available to operate the appliance properly.
8 / EN
Washing Machine / User’s Manual
4 Your washing machine
4.1 Overview
1
2
8
1- Power cable
2- Top panel
3- Control panel
4- Drain hose
5- Loading door
6- Filter cap
7- Adjustable feet
8- Detergent drawer
3
4
5
6
7
9 / EN
Washing Machine / User’s Manual
4.2 Package Contents
1112
10
9
a
14
15
13
9- Power cable
10- Drain hose
11- Transportation safety bolts *
12- Mains water inlet hose (One of the following filter types is used for the mains hose
connection.)
a- Electronical water shut-off
b- Mechanical water shut-off
c- Standard
13- Liquid detergent container**
14- User Manual
15- Blind plug***
16- Plastic plug group
* Number of transportation safety bolts may change depending on the model of your machine.
** This may be supplied with the machine depending on the model of your machine.
*** This is supplied if your machine is equipped with double water inlet.
b
c
16
C
10 / EN
Figures in this manual are schematic and may not match the product exactly.
Washing Machine / User’s Manual
4.3 Technical specifications
Complying Commission Delegated Regulation (EU) No 1061/2010
Supplier name or trademarkBeko
Model nameWMG11464W
Rated capacity (kg) 11
Energy efficiency class / Scale from A+++ (Highest Efficiency) to D (Lowest Efficiency)A+++
Annual Energy Consumption (kWh)
Energy consumption of the standard 60°C cotton programme at full load (kWh)1.300
Energy consumption of the standard 60°C cotton programme at partial load (kWh)0.900
Energy consumption of the standard 40°C cotton programme at partial load (kWh)0.820
Power consumption in ‘off-mode’ (W)0.440
Power consumption in ‘left-on mode’ (W)0.640
Annual Water Consumption (l)
Spin-drying efficiency class / Scale from A (Highest Efficiency) to G (Lowest Efficiency)B
Maximum spin speed (rpm)1400
Remaining moisture Content (%)53
Standard cotton programme
Programme time of the standard 60°C cotton programme at full load (min)236
Programme time of the standard 60°C cotton programme at partial load (min)190
Programme time of the standard 40°C cotton programme at partial load (min)190
Energy Consumption based on 220 standard washing cycles for cotton programmes at 60°C and 40°C at full and partial load, and the
consumption of the low-power modes. Actual energy consumption will depend on how the appliance is used.
(2)
Water consumption based on 220 standard washing cycles for cotton programmes at 60°C and 40°C at full and partial load. Actual water
consumption will depend on how the appliance is used.
(3)
“Standard 60°C cotton programme” and the “standard 40°C cotton programme” are the standard washing programmes to which the information
in the label and the fiche relates and these programmes are suitable to clean normally soiled cotton laundry and that they are the most efficient
programmes in terms of combined energy and water consumption.
Technical specifications may be changed without prior notice to improve the quality of the product.
(1)
(2)
(3)
Cotton Eco 60°C and 40°C
237
13200
11
• / -
11 / EN
Washing Machine / User’s Manual
4.4 Installation
• Apply to the nearest authorized service agent for the installation of your product.
• Preparation of the location and electrical, tap water and waste water installations at the
place of installation is under customer's responsibility.
• Make sure that the water inlet and discharge hoses as well as the power cable are not
folded, pinched or crushed while pushing the product into its place after installation or
cleaning procedures.
• Make sure that the installation and electrical connections of the product are performed
by authorized service. Manufacturer shall not be held liable for damages that may arise
from procedures carried out by unauthorized persons.
• Prior to installation, visually check if the product has any defects on it. If so, do not have
it installed. Damaged products cause risks for your safety.
4.4.1 Appropriate installation location
• Place the product on a hard and level floor. Do not put it onto a carpet with high pile or
other similar surfaces.
• When the washing machine and drier are placed on top of each other, their total weight
–when loaded– amounts to 180 kilograms. Place the product on a solid and flat floor
that has sufficient load carrying capacity!
• Do not place the product on the power cable.
• Do not install the product in the environments where the temperature falls below 0 ºC.
• Leave a minimum space of 1 cm between the machine and the furniture.
• On a graduated floor, do not place the product next to the edge or on a platform.
12 / EN
Washing Machine / User’s Manual
4.4.2 Removing packaging reinforcement
Tilt the machine backwards to remove the packaging
reinforcement. Remove the packaging reinforcement by
pulling the ribbon. Do not make this operation alone by
yourself.
4.4.3 Removing the transportation locks
1 Loose all bolts with an appropriate wrench until they turn freely (C).
2 Remove the transport safety bolts by turning them slightly.
3 Insert the plastic covers in the bag containing the user manual to the openings on the
rear panel. (P)
CAUTION: Remove the transportation safety bolts before operating the washing machine!
A
C
Otherwise, the product will be damaged.
Keep the transportation safety bolts in a safe place to reuse when the washing machine needs to be
moved again in the future.
Install the transport safety bolts in reverse order of the disassembly procedure.
Never move the product without the transportation safety bolts properly fixed in place!
13 / EN
Washing Machine / User’s Manual
4.4.4 Connecting water supply
The water supply pressure required to run the product is between 1 to 10 bars (0.1 – 1 MPa). It is
necessary to have 10 – 80 liters of water flowing from the fully open tap in one minute to have your
C
A
1 Tighten the nuts of the hose by hand. Never use a tool when tightening the nuts.
2 When hose connection is completed, check whether there is leak problems at the
machine run smoothly. Attach a pressure reducing valve if water pressure is higher.
If you are going to use the double water-inlet product as a single (cold) water-inlet unit, you must
install the supplied stopper to the hot water valve before operating the product. (Applies for the
products supplied with a blind stopper group.)
CAUTION: Models with a single water inlet should not be connected to the hot water tap. In such a
case the laundry will get damaged or the product will switch to protection mode and will not operate.
CAUTION: Do not use old or used water inlet hoses on the new product. It may cause stains on your
laundry.
Connect the special water supply hoses supplied with the product to the
water inlets on the product. Red hose (left) (max. 90 ºC) is for hot water
inlet, blue hose (right) (max. 25 ºC) is for cold water inlet.
Make sure that the hot and cold water taps are connected correctly when
the product is being installed. Otherwise, your laundry will come out hot at
the end of the washing process and wear out.
connection points by opening the taps fully. If any leaks occur, turn off the tap and
remove the nut. Retighten the nut carefully after checking the seal. In order to prevent
the water leaks and resultant damages, keep the taps closed when you do not use
the product.
14 / EN
Washing Machine / User’s Manual
4.4.5 Connecting the drain hose to the drain
• Attach the end of the drain hose directly to waste water drain, lavatory or bathtub.
CAUTION: Your drain house will be flooded if the hose comes out of its housing during water
A
discharge. Moreover, there is risk of scalding due to high washing temperatures! In order to prevent
such situations and make sure that the machine performs water intake and discharge processes
without any problem, fix the drain hose securely.
• Connect the drain hose to a minimum height of 40 cm and a maximum height of 100
cm.
• In case the drain hose is elevated after laying it on the floor level or close to the ground
(less than 40 cm above the ground), water discharge becomes more difficult and the
laundry may come out excessively wet. Therefore, follow the heights described in the
figure.
100cm
40cm
• To prevent the waste water to go back into the machine again and to ensure easy
drainage, do not immerse the end of the hose into the waste water or do not insert it
into the drain for more than 15 cm. If it is too long, cut it short.
• The end of the hose should not be bent, it should not be stepped on and the hose must
not be pinched between the drain and the machine.
• If the length of the hose is too short, use it by adding an original extension hose. Length
of the hose may not be longer than 3.2 m. To avoid water leak failures, the connection
between the extension hose and the drain hose of the product must be fitted well with
an appropriate clamp as not to come off and leak.
15 / EN
Washing Machine / User’s Manual
Loading...
+ 33 hidden pages
You need points to download manuals.
1 point = 1 manual.
You can buy points or you can get point for every manual you upload.