1400 Release 4 Service Pack 6 Readme - (August 7, 2014)
1408 and 1416 Digital Desk phone Release 4 Service Pack 6 Readme
This is the Readme file for Release 4 Service Pack 6 (Alias Release 40, Vintage 9) of the Avaya 1408 and 1416 Digital Desk phone software.
The 1408 and 1416 telephones can be upgraded via Avaya Aura® Communication Manager Release 5.2.1 or later.
Service Pack 4 Release 6 is a cumulative release that contains fixes from all prior releases.
This release contains a fix (Wi01182964) of the problem when a call log does not contain a name in the name field, then, if the user wants to add that call log to the contact list as new, the phone will freeze and needs to be reset.
Fixes Resolved in Release 4 Service Pack 6
# |
WI |
Description |
1 |
wi01182964 |
14xx Freeze when adding Call Log in CONTACTS |
Known issues in 1408 and 1416 Release 4 Service Pack 6
None.
Firmware Release Package
The files included in this release must be loaded into Avaya Aura® Communication Manager to be available for downloading to 1400 Series Digital Deskphones. Refer to Administering Avaya Aura® Communication Manager (03-300509), Chapter 6, Managing Telephones for details on switch administration procedures. This document is available at:
http://support.avaya.com/css/P8/documents/1001716582
Additional documentation and user guides for the 1400 Series Digital Deskphones can be located on http://support.avaya.com/products/P0601/1400-series-digital-deskphones/
Note: Some Deskphones ordered will contain older firmware and the phone must be upgraded for proper operation.
Release 4 Service Pack 6 package contains all the files necessary to upgrade Avaya 1408/1416 Digital Deskphones. These files are outlined below: (only the Application Code file is new)
o |
Application Code: |
1408_1416_R40.bin |
o |
Language File: |
lng_R10_v11_Pack01.bin |
oFont files:
Simplified Chinese: fnt_R02_v01_GB.bin
Traditional Chinese: fnt_R02_v01_Big5.bin
Japanese: fnt_R02_v01_JIS.bin
Korean: fnt_R02_v01_KSC.bin
Copyright Avaya 2014 All rights reserved Page 1 of 6
1400 Release 4 Service Pack 6 Readme - (August 7, 2014)
In support of Simplified Chinese, Traditional Chinese, Japanese and Korean, the respective font file must be downloaded also. NOTE: The font and language files have not altered since Release 4 SP1.
After a successful upgrade, use the phone “MENU” and arrow keys to select “Advanced” followed by “SelfTest” and the phone should show the following:
1408(1416) |
Rel[40.0] |
SW vintage |
[09] |
Bootloader |
U[25]P[00] |
Lng |
lng_R10_v11_Pack01 |
Fnt1 |
fnt_R02_v01_<installed font file> |
COMMUNICATION MANAGER (CM) COMPATIBILITY:
The 1408/1416 DCP phones are supported on Communication Manager 5.2.1 and higher. The 1416
and 1408 are aliased as 2420 and 2410 phones, respectively on CM 5.2.1 and they are natively supported on CM 6.0 and later.
IP OFFICE (IPO) COMPATIBILITY:
The 1408/1416 DCP phones are supported on IPO 6.0 and later. Please consult the IP Office Technical Bulletins for the details of specific IP Office software compatibility.
Copyright Avaya 2014 All rights reserved Page 2 of 6
Loading...