Quick
Start Guide
RP-AC51
Wi-Fi AC Repeater
E12398 / First Edition / March 2017
LED explanations
POWER
On: RP-AC51 is power on.
Off: RP-AC51 is power off.
EXISTING NETWORK
On: Connected to the router/AP.
Off: Not connected to the router/AP.
MOVE CLOSER
Need to move RP-AC51 closer to the router/AP.
MOVE AWAY SLIGHTLY
Need to move RP-AC51 slightly away from the router/AP.
BEFORE SETUP |
WE SUGGEST... |
|
|
|
01 Placing your RP-AC51 |
02 Power On |
|||
1 Place your RP-AC51 near your |
2 Check the LEDs and see the |
1 |
Plug your RP-AC51 to a |
|
router/AP. |
LED explanations. |
|
power outlet. |
|
|
|
|
2 |
Turn on the power switch. |
|
|
|
||
|
|
|
|
|
around 2 meters
Button explanations
POWER SWITCH
Switch this button on/off to turn RP-AC51 on/off.
WPS BUTTON
Press this button to quickly connect to the router/AP via the WPS method.
RESET
BUTTON
Use a pin to push this
button to reset
RP-AC51 to Reset its factory de-
fault settings.
Wait until the power LED turns blue, indicating that your RP-AC51 is ready to connect to your existing router/AP.
SETUP METHODS
METHOD 1 APP SUPPORT
01 Download the app 02 Use the app
|
|
|
|
|
|
|
|
|
|
|
|
|
1 |
Tap SET UP EXTENDER. |
3 |
Follow the Quick Extender Setup instructions. |
|||||||||
2 |
Open your phone Wi-Fi, and connect |
4 |
Assign a unique network name (SSID) for your extended |
|||||||||
|
|
to your RP-AC51’s SSID. |
|
network. |
||||||||
|
|
|
|
|
|
5 |
Wait until the setup is completed. |
METHOD 2 WPS SUPPORT
01 Connect via WPS |
02 Enjoy Wi-Fi |
1Press the WPS button on your router/AP.
2Press the WPS button on your RP-AC51 for more than two (2) seconds until the power LED starts to blink.
NOTE: Wait until the existing network LED blinks for about two (2) minutes, then turns solid blue, indicating the WPS process is completed.
Your RP-AC51’s wireless network name (SSID) changes to your existing Wi-Fi network name, ending with _RPT or _RPT5G and shares your router/AP’s Wireless Password.
E12398_RP-AC51_QSG_Special_A3.indd 1 |
|
|
2017-04-05 16:37:57 |
|
|
||
|
|
|
|