Topcom BUTLER 2900 User Manual

BUTLER 2900/TWIN/TRIPLE

USER MANUAL

HANDLEIDING

MANUEL D’UTILISATEUR GEBRAUCHSANWEISUNG MANUAL DE USUARIO

v.2.0

!! Important !!

To use ‘Caller ID’ (display caller), this service has to be activated on your phone line. Normally you need a separate subscription from your telephone company to activate this function. If you don’t have the Caller ID function on your phone line, the incoming telephone numbers will NOT be shown on the display of your telephone.

!! Important !!

Pour utiliser la fonction ‘Caller ID/Clip’ (affichage de l’appelant), ce service doit être activé sur votre ligne téléphonique. Généralement, vous avez besoin d’un abonnement séparé de votre compagnie de téléphone pour activer cette fonction. Si vous n’avez pas la fonction ‘Caller ID - Affichage Appelant’ sur votre ligne téléphonique, les numéros de téléphone entrants n’apparaîtront PAS sur l’écran de votre téléphone.

!! Belangrijk !!

Om de ‘Nummerweergave’ te kunnen gebruiken, moet deze dienst geactiveerd zijn op uw telefoonlijn. Om deze dienst te activeren, hebt U hiervoor meestal een apart abonnement van uw telefoonmaatschappij nodig. Indien U geen nummerweergavefunctie hebt op uw telefoonlijn, zullen de inkomende telefoonnummers NIET op de display van uw toestel verschijnen.

!! Wichtig!!

Zur Verwendung der ‘Rufnummernanzeige’ muss dieser Dienst erst für Ihre Telefonleitung freigegeben werden. Zur Aktivierung dieser Dienstleistung benötigen Sie meistens ein separates Abonnement Ihrer Telefongesellschaft.Wenn Sie für Ihre Telefonleitung keine Rufnummernanzeigefunktion haben, erscheinen die eingehenden Telefonnummern NICHT im Display Ihres Gerätes.

¡¡ Importante !!

Para poder usar la función “Identificación de llamadas,este servicio tiene que estar dado de alta en su línea telefónica. Normalmente es necesario abonarse a dicho serviciopara que la compañía telefónica active esta función. Si su línea telefónica no dispone de la funciónIdentificación de llamadas, la pantalla del aparato no mostrará los números de teléfono de las llamadas entrantes.

This product is in compliance with the essential requirements and other relevant provisions of the R&TTE directive 1999/5/EC. The Declaration of conformity can be found on :

http://www.topcom.net/support/cedeclarations.php

GB The features described in this manual are published with reservation to modifications.

NL De in deze handleiding beschreven mogelijkheden worden gepubliceerd onder voorbehoud van wijzigingen.

FLes possibilités décrites dans ce manuel sont publiées sous réserve de modifications.

DDie in dieser Bedienungsanleitung umschriebenen Möglichkeiten, werden vorbehaltlich Änderungen publiziert.

SLas características descritas en este manual pueden ser objeto de futuras modificaciones.

Topcom Butler 2900 / Twin / Triple
1.	BUTTONS	4
2.	DISPLAY	5
3.	INSTALLATION	5
3.1	Base	5
3.2	Multi charger	6
3.3	Handset	6
4.	BATTERY LOW INDICATION	6
5.	OPERATION	7
5.1	Outgoing calls	7
5.2	Incoming calls	7
5.3	Activate/deactivate hands free function	7
5.4	Programming memory numbers	7
5.5	Calling a memory number	8
5.6	Mute function	8
5.7	Setting the volume	8
5.8	Paging	8
5.9	Out of range warning	8
5.10	Flash button (R)	8
5.11	Setting the ring volume and melody	8
5.12	Key lock	9
5.13	Setting the dialling mode	9
6.	CALLER-ID FUNCTION (CLIP)	9
6.1	New calls	9
6.2	Consulting the Call list	9
6.3	Calling a number from the Call list	9
6.4	Erasing a number from the Call list	10
6.5	Store a number from the call log into the memory	10
7.	REGISTER/DE-REGISTER A HANDSET	10
7.1	Register to a Topcom B2900/2920 base	10
7.2	Subscribing a TOPCOM Butler 300 DECT GAP Headset	10
7.3	Removing a handset	11
8.	CALL TRANSFER AND INTERCOM BETWEEN TWO HANDSETS	11
8.1	Call transfer and conference call during an external call	11
8.2	Internal call (intercom)	11
9.	TOPCOM WARRANTY	12
10.	TROUBLESHOOTING	12
11.	TECHNICAL DATA	12
12.	DEFAULT SETTINGS	12

ENGLISH

Topcom Butler 2900 / Twin / Triple

3

Topcom Butler 2900 / Twin / Triple

SAFETY INSTRUCTIONS

•Only use the charger plug supplied. Do not use other chargers, as this may damage the battery cells.

•Only insert rechargeable batteries of the same type. Never use ordinary, non-rechargeable batteries. Insert rechargeable batteries so they connect to the right poles (indicated in the battery compartment of the handset).

•Do not touch the charger and plug contacts with sharp or metal objects.

•The operation of some medical devices may be affected.

•The handset may cause an unpleasant buzzing sound in hearing aids.

•Do not place the basic unit in a damp room or at a distance of less than 1.5 m away from a water source. Keep water away from the handset.

•Do not use the telephone in environments where there is a risk of explosions.

•Dispose of the batteries and maintain the telephone in an environment-friendly manner.

•As this telephone cannot be used in case of a power cut, you should use a mainsindependent telephone for emergency calls, e.g. a mobile phone.

•This telephone uses rechargable batteries. You have to dispose of the batteries

in an environment friendly manner according to your specific country regulations.

N i M H

CLEANING

Clean the telephone with a slightly damp cloth or with an anti-static cloth. Never use cleaning agents or abrasive solvents.

8

1. BUTTONS

1 Numerical buttons

2Line button

3 Redial / Pause button /P

4 Flash R/ Scroll R/

5 Memory button

6Paging button

(to retrieve the handset) 7 Mute button

8Int button Int

9 Charge indicator (LED)

10Call log/Scroll /

11Volume/melody button /

12Key lock

13Ringer ON/OFF

14Handsfree

15Charge indicator (LED) multi charger

Butler 2900C

R

		INT
1	2ABC	3DEF
4GHI	5JKL	6MNO
7PQRS	8TUV	9WXYZ
/	0	#/

2

4

5

14

1

13

11

6

Butler 2900C

R			10
	INT		7
1	2ABC	3DEF
4GHI	5JKL	6MNO
7PQRS	8TUV	9WXYZ
/	0	#/	12
		/P	3
			9
	Butler 2900

/P

15

4	Topcom Butler 2900 / Twin / Triple

Topcom Butler 2900 / Twin / Triple

2. DISPLAY

ENGLISH

ICON:							MEANING:
							You are online
							New numbers in call list
							Rechargeable battery level indicator
							The antenna indicates the quality of reception.
							The antenna blinks when the handset is out of range!
							Microphone is muted
							Memory records are being retrieved or set up
							The keypad is locked
							There are more digits on the left
							There are more digits on the right
							During hands free
							When ring buzzer is turned off
							There are new messages in your voice mail
							During internal call
HS-x							x = handset number

3. INSTALLATION

3.1 BASE

•Plug one end of the phone cable into the phone unit and the other end into the telephone line wall socket.

•Connect the small plug of the AC adaptor to the phone and the other end of the adapter cable to the electric socket.

TEL.

SOCKET

Telephone cord

Power cable

Topcom Butler 2900 / Twin / Triple

5

Topcom Butler 2900 / Twin / Triple

3.2 MULTI CHARGER

•Connect the AC adaptor to the electric socket

3.3 HANDSET

•Insert 2 rechargeable batteries (AAA) inside the battery compartment of the handset..

+	-
-	+

Put the handset on the base unit. The red Charge LED will lit as long as the handset is on the base.

Charge the handset for a period of 24 hours before using the handset for the first time. To extend the battery life time, discharge the batteries completely from time to time. As soon as the handset emits a warning tone or when the battery icon is empty, you have to put it back on the base unit for charging.

4. BATTERY LOW INDICATION

When the battery is empty, the handset no longer carries out operations. When a battery is completely empty and you have put the handset on the base unit for a short period of time, the Battery symbol will appear to be fully charged but this is actually not the case. The battery capacity will decrease rapidly. We advise you to put the handset on the base unit for 12 hrs so that it can be recharged completely.

• Full battery

• Empty battery

6	Topcom Butler 2900 / Twin / Triple

Topcom Butler 2900 / Twin / Triple

When you are in the middle of a conversation and the battery is almost empty, the handset will emit a warning signal. Place the handset on the base unit to charge.

5. OPERATION

5.1 OUTGOING CALLS

5.1.1 Making a phone call

•Press the Line button . You will hear the dial tone.

•Enter the desired telephone number.

•Press the Line button when you want to terminate the call.

5.1.2 Call setup with dial preparation

•Enter the desired telephone number. An incorrect number can be corrected by means of the Mute button . When you haven’t pressed a button for 10 seconds, the number you’ve already entered will disappear and the handset returns to standby mode.

•Press the Line button . The number will be dialled automatically.

•Press the Line button when you want to terminate the call.

5.1.3 Redialling the last number dialled

•Press the Line key .

• The Line/Charge indicator (LED) on the base unit will blink.

•You will hear the dial tone.

•Press the Redial key . The number you last called is dialled automatically.

5.1.4 Redial one of the last 3 numbers dialled

•Press the Redial key . The number you last called appears on the display. If you would like to dial one of the last 3 numbers dialled, press the Redial key a few times until the desired number appears on the display.

•Press the Line key .

•The number shown on the display is dialled automatically.

•After finishing your call, press the Line key to hang up.

5.2 INCOMING CALLS

•When a call comes in, the handset will start to ring. The LED on the base will blink.

•Press the Line button to answer the incoming call.

5.3 ACTIVATE/DEACTIVATE HANDS FREE FUNCTION

This function allows you to communicate without having to pick up the handset. When you are on the phone, press the Hands free key to activate the hands free function.

Press the same button to deactivate the hands free function.

Note : When you are calling in hands free mode and you want to change the volume, press the Volume button .

Attention !! When you use the hands free function for a long time, the batteries will be empty more quickly !

5.4 PROGRAMMING MEMORY NUMBERS

You can program 10 indirect numbers (of max. 25 digits) in the phone’s memory.

•Press and hold the Memory button until the -icon appears on the display.

•Enter the telephone number you whish to store.

•Press the Memory button again to confirm.

•Enter the memory location (0-9) where you want to store the number.

•You will hear a confirmation tone and the -icon will disappear.

Remarks :

If you wish to insert a pause, press the Redial/Pause button /P on the location where you want a pause of 3 sec.

ENGLISH

Topcom Butler 2900 / Twin / Triple

7

Topcom Butler 2900 / Twin / Triple

5.5 CALLING A MEMORY NUMBER

•Press the Memory button , followed by the number of the memory location (0-9).

•Press the Line button . The memory number will be dialled automatically.

•Press the Line button when you want to terminate the call.

5.6 MUTE FUNCTION

It is possible to deactivate the microphone during a conversation. Now you can speak openly without being heard by your correspondent.

•Press the Mute button during a conversation. The microphone will be deactivated. The MUTE symbol . appears on the display.

•Press the Mute button again when you want to continue the conversation.

5.7 SETTING THE VOLUME

During a conversation you can set the volume by pressing the Volume button . You can set the volume alternatively in Hi, Medium and Low.

Note: The hands free receiver volume is also adjustable as above described!

5.8 PAGING

When you press the Paging button on the base unit, the handset emits a ringing signal for 20 seconds. This signal helps you find a lost handset. Press any key to stop the ringing on a handset.

5.9 OUT OF RANGE WARNING

When the handset is out of the working range of the base unit during a conversation, the unit will emit a warning signal to warn the user that he has to move closer towards the base unit.

5.10 FLASH BUTTON (R)

When you press the R button, also called flash or recall, the unit generates a line interruption (of 100 ms or 250 ms). It gives you the possibility to use the special services of your telephone provider and/or to transfer calls when you have a telephone exchange.

5.10.1 Setting the Flash time

•Press and hold the redial button for 3 sec.

•The display will show: ‘S’ for 100ms

or ‘L’ for 250ms

•The flash time setting will disappear after 2 sec. from the display

5.11 SETTING THE RING VOLUME AND MELODY

5.11.1 Handset melody

•Press and hold the melody button until the current melody is heard.

•Select the desired melody (1-9) by means of the scroll keys or by entering a number (1 - 9).

•Press again to confirm the setting

5.11.2 Handset ring volume

•Press the volume button in standby

•The handset will ring in the current volume

•Press 1-5 or use the scroll keys to select the desired volume

•Press ’0’ to turn the volume OFF

Remark:

-You can turn the ringer volume of each individual handset ON or OFF by simply press and hold the key in standby.

-The base unit will never ring!

8	Topcom Butler 2900 / Twin / Triple

Topcom Butler 2900 / Twin / Triple

5.12 KEY LOCK

When the keypad is locked, pressing any key will have no effect during standby (except holding the key).

•Press and hold the key

• appears on the display and the keypad is locked

•Press and hold the key again to un-lock the keypad

When there is an incoming call, you can still answer the call by pressing the Line button . During the call, the keypad functions as normal. When the call is ended, the keypad will be locked again

5.13 SETTING THE DIALLING MODE

There are two types of dialling mode:

DTMF/Tone dialling (the most common) (default)

Pulse dialling (for older installations)

To change the mode of dialling:

•Press and hold the flash R button to toggle between dialling modes: ‘P’ will appear when set to pulse or ‘T’ when set to tone (DTMF) dialling

•After 5 sec. the unit returns to standby

6. CALLER-ID FUNCTION (CLIP)

The Topcom B2900 displays the telephone numbers of incoming calls. This function is only possible if you are subscribed to a telephone operator that provides this service. Contact your telephone provider for more information. When you receive a call, the numbers are saved in a Call list. This list can hold 20 telephone numbers (each of max. 25 digits). If the number is longer then 14 digits, you can press the key to show the other digits!

6.1 NEW CALLS

When you’ve received a new unanswered call, the CLIP symbol will blink on the display.

6.2 CONSULTING THE CALL LIST

•Press the Call Log button . The last received call is shown on the display. If the list is empty, ‘NO CLIP’ is shown on the display.

•The following will be shown on the display:

Progress number

Time (24h format) *

Date (DD-MM) *

ENGLISH

•	After 5 seconds, the telephone number will be shown.You can skip the date/time by pressing the		button.

•Use the left scroll key to scroll to the previous call. Use the button to show the next call.

•You can leave the Call list by pressing the button.

* ONLY WHEN THE NETWORK SENDS THE TIME/DATE TOGETHER WITH THE TELEPHONE NUMBER!!! On some networks with caller ID, time and date will not be displayed

6.3 CALLING A NUMBER FROM THE CALL LIST

•Scroll through the Call list until the desired number is shown on the display.

•Press the Line button . The number will be dialled automatically.

Topcom Butler 2900 / Twin / Triple

9

Topcom Butler 2900 / Twin / Triple

6.4 ERASING A NUMBER FROM THE CALL LIST

•Scroll through the Call list until the desired number is shown on the display.

•Press and hold the Mute button for 3 sec. to erase the number.

6.5 STORE A NUMBER FROM THE CALL LOG INTO THE MEMORY

•Scroll through the Call list until the desired number is shown on the display.

•Press and hold the Memory button for 3 sec.

•Enter the memory location (0-9) where you want to store the number

•Enter the Memory button again to confirm and to go back to standby

7. REGISTER/DE-REGISTER A HANDSET

7.1 REGISTER TO A TOPCOM B2900/2920 BASE

You can subscribe 5 handsets to one base unit. By default, each handset is subscribed as handset 1 on the base unit upon delivery (base unit 1).

!!! You only need to subscribe the handset if: !!!

•The handset subscription has been removed from the base unit (e.g. for reinitialisation)

•You want to subscribe a different handset to this base unit.

The underlined procedure is only applicable to a Topcom Butler 29xx, 2900, 2920 handset and base unit!! Keep the Paging key on the base unit pressed for 10 seconds until the Line/Charge indicator

on the base unit begins to blink rapidly. The Line/Charge indicator will blink rapidly

for one minute. During this minute, the base unit is in register mode and you must do the following to subscribe the handset:

•Press and hold the and key for 3 sec.

•The following will appear on the display:

•Enter the number of the base unit you would like to subscribe the handset to (1-4)

•The unit will start searching for the base and when found it will ask to enter the pin code (4 digits):

•Enter the base pin code (0000). If the pin is wrong, the handset will restart the searching for the base.

•When the handset is registered, it will show ‘HS’ followed by the handset number.

7.2 SUBSCRIBING A TOPCOM BUTLER 300 DECT GAP HEADSET

Press the Paging key on the base unit for 10 seconds until the Line/charge indicator on the base unit starts to blink quickly. The line/charge indicator will blink quickly for one minute. During this minute, the base unit is in subscribing mode and you must do the following to subscribe the headset:

-Turn ON the headset by pressing the ON/OFF button until you hear two beep tones. At the same time the red and green LED will lit ones.

-Remove the rubber cover of the power socket so that the hole of the power socket is free. Pull out the rubber cover from the headset so that the registration key hole is free also.

-Press the headset registration key. The red LED will flash rapidly.

-If after a few seconds the green LED flashes slowly, the registration is successful.

-If the red LED flashes slowly, the registration is failed. Repeat above procedure.

10	Topcom Butler 2900 / Twin / Triple

Topcom Butler 2900 / Twin / Triple

7.3 REMOVING A HANDSET

You can remove a handset from a base to allow another handset to be registered:

•Press and hold the mute and redial key for 3 sec.

P I N

•Enter the pin code (0000). If the pin is wrong, the handset will go back to standby.

PI N 123 4 H5 -

•Enter the handset number (1-5) you want to remove

•The unit will go back to standby is the removal is successfully. If not, it will ask again to enter the handset number

Remark: You can only remove existing handsets and others then the one you are using

8. CALL TRANSFER AND INTERCOM BETWEEN TWO HANDSETS

!!! These functions only work when more then one handset (like a twin/triple version) is registered to the base!!!

8.1 CALL TRANSFER AND CONFERENCE CALL DURING AN EXTERNAL CALL

•During an external call, press the INT key followed by the number (1 - 5) of the other handset.

•The other handset will start to ring:

-When the other handset takes the line you can talk internally.

If you hang up, the external line will be connected with the other handset.

If you press and hold the INT key for 3 seconds you can talk with the 2nd handset and external line at the same time (conference call)

-Or press the INT key again to return to the external call.

•Press the Line button to end the call.

8.2. INTERNAL CALL (INTERCOM)

•In standby press the INT key followed by the number (1-5) of the other handset.

•The other handset will start to ring. You can stop the ringing by pressing the Line button .

•If the other handset answers the call by pressing the Line button you can talk internally.

•Press the Line button to end the call.

ENGLISH

Topcom Butler 2900 / Twin / Triple

11

Topcom Butler 2900 / Twin / Triple

9. TOPCOM WARRANTY

•This equipment comes with a 24-month warranty. The warranty will be honoured on presentation of the original bill or receipt, provided the date of purchase and the unit type are indicated.

•During the time of the warranty Topcom will repair free of charge any defects caused by material or manufacturing faults. Topcom will at its own discretion fulfil its warranty obligations by either repairing or exchanging the faulty equipment.

•Any warranty claims will be invalidated as a result of intervention by the buyer or unqualified third parties.

•Damage caused by inexpert treatment or operation, and damage resulting from the use of non-original parts or accessories not recommended by Topcom is not covered by the warranty.

•The warranty does not cover damage caused by outside factors, such as lightning, water and fire, nor does it apply if the unit numbers on the equipment have been changed, removed or rendered illegible.

Note: Please do not forget to enclose your receipt if you return the equipment.

10. TROUBLESHOOTING

PROBLEM	POSSIBLE CAUSE	SOLUTION
No Display	Batteries not charged	Check the position of the batteries
		Recharge the batteries
No dialling tone	Telephone cable not	Check the connection
	properly connected	of the telephone cable
Volume of conversation partner too low		Adjust the volume during the conversation
		by pressing the volume key
Handset ringer volume too low		Adjust the ringer volume

11. TECHNICAL DATA

Range:	up to 300 m in open space
	up to 50 m in buildings
Dialling options:	DTMF (tone) and Pulse
Batteries:	2 x 1.2V, 600 mAh AAA Type NiMH rechargeable
Max. standby time:	approx. 120 hours
Max. talk time:	13 hours
Ambient temperature:	+5 °C to +45 °C
Permitted relative air humidity:	25 to 85 %
Power supply base adapter:	220/230V , 50 Hz
Memories	10 indirect with max. 25 digits

12. DEFAULT SETTINGS

Flash time	100 ms
Dialling mode	Tone
Ring volume	Level 3
Ring melody	Ringer 8
Base pin	0000

The CE symbol indicates that the unit complies with the essential requirements of the R&TTE directive.

12	Topcom Butler 2900 / Twin / Triple

Topcom Butler 2900 / Twin / Triple
1.	TOETSEN	14
2.	DISPLAY	15
3.	INSTALLATIE	15
3.2	Handset lader	16
3.3	Handset	16
4.	BATTERIJ LEEG INDICATOR	16
5.	WERKING TELEFOON	17
5.1	Uitgaande gesprekken	17
5.2	Inkomende oproepen	17
5.3	Handenvrij-functie aan-/uitschakelen	17
5.4	Geheugennummers programmeren	17
5.5	Een geheugennummer oproepen	18
5.6	Tijdelijke uitschakeling van de microfoon (Mute)	18
5.7	Volume regelen	18
5.8	Paging	18
5.9	Buiten Bereik-waarschuwing	18
5.10	Flashtoets (R)	18
5.11	Het belvolume en de beltoon instellen	18
5.12	Toetsenbord blokkeren	19
5.13	De kiesmodus instellen	19
6.	NUMMERWEERGAVE (CLIP-CALLER ID)	19
6.1	Nieuwe oproepen	19
6.2	Raadplegen van de Oproeplijst	19
6.3	Oproepen van een nummer uit de Oproeplijst	20
6.4	Telefoonnummers uit de Oproeplijst wissen	20
6.5	Nummer uit de oproeplijst in het geheugen opslaan	20
7.	AANMELDEN/AFMELDEN VAN EEN HANDSET	20
7.1	Aanmelden op een Butler 2900/2920 basis	20
7.2	Aanmelden van een TOPCOM Butler 300 DECT GAP Headset	20
7.3	Handset verwijderen (afmelden)	21

8.OPROEPDOORSCHAKELING EN INTERCOMGESPREKKEN

	TUSSEN TWEE HANDSETS	21
8.1	Doorverbinden en conferentie gesprek tijdens externe communicatie	21
8.2.	Interne oproep (intercom)	21
9.	DE GARANTIE VAN TOPCOM	22
10.	PROBLEMEN VERHELPEN	22
11.	TECHNISCHE GEGEVENS	22
12.	FABRIEKSINSTELLINGEN	23

NEDERLANDS

Topcom Butler 2900 / Twin / Triple

13

Topcom Butler 2900 / Twin / Triple

VEILIGHEIDSVOORSCHRIFTEN

•Gebruik enkel de meegeleverde adapter. Geen vreemde adapters gebruiken, de accucellen kunnen hierdoor beschadigd worden.

•Gebruik enkel oplaadbare batterijen van hetzelfde type. Gebruik nooit gewone, niet oplaadbare batterijen. Let bij het plaatsen van de oplaadbare batterijen op de polariteit (aangeduid in de batterijruimte van de handset).

•Raak de laaden stekkercontacten niet aan met scherpe en metalen voorwerpen.

•De werking van medische toestellen kan worden beïnvloed.

•De handset kan een onaangenaam gezoem veroorzaken in hoorapparaten.

•Het basisstation niet opstellen in vochtige ruimten en niet op minder dan 1,5 m van een waterbron. De handset niet in aanraking brengen met water.

•De telefoon niet gebruiken in explosieve omgevingen.

•Ontdoe u op een milieuvriendelijke wijze van de batterijen en de telefoon.

•Daar bij stroomuitval met dit toestel niet kan getelefoneerd worden, in geval van nood een telefoon gebruiken die geen netstroom nodig heeft bvb. een GSM.

•Deze telefoon gebruikt heroplaadbare batterijen die op een milieuvriendelijke manier,

volgens nationale regels dienen te worden ontdaan.

N i M H

REINIGEN

Veeg de telefoon met een licht vochtig doek of met een antistatische doek af. Gebruik nooit reinigingsmiddelen of

agressieve oplosmiddelen.	8

1. TOETSEN

1	Cijfertoetsen			2
2	Lijntoets
3	Herkies-/ Pauzetoets			/P
4	Flash R/ Scroll R/
5	Geheugentoets

6Paging-toets

(om de handset te zoeken)

7	Microfoon-uit	4
	(Mute) -toets
8	INT-toets Int	5
9	Laad-indicator (LED)	14

10Oproeplijst/Scroll /

11Volume/melodie toets/

12 Keylock

1

13Bel Aan/uit

14Handenvrij-toets

15 Laad-indicator (LED)			13
			11
	Butler 2900C		6
R
	INT
1	2ABC	3DEF
4GHI	5JKL	6MNO
7PQRS	8TUV	9WXYZ
/	0	#/

/P

15

Butler 2900C

R			10
	INT		7
1	2ABC	3DEF
4GHI	5JKL	6MNO
7PQRS	8TUV	9WXYZ
/	0	#/	12
		/P	3

9

Butler 2900

14	Topcom Butler 2900 / Twin / Triple

Topcom Butler 2900 / Twin / Triple

2. DISPLAY

IKOON:							BETEKENIS:
							In verbinding
							Nieuwe nummers in de Oproeplijst
							Laadniveau van de herlaadbare batterijen
							De antenne toont de kwaliteit van de ontvangst.
							De antenne knippert als de handset niet is aangemeld of buiten bereik van de basis is
							Microfoon is gedempt
							Telefoonnummers uit het geheugen opvragen of programmeren
							Het toetsenbord is geblokkeerd
							Er zijn meer tekens links
							Er zijn meer tekens rechts
							Handenvrije modus geactiveerd
							Wanneer het belvolume uitgeschakeld is
							U heeft nieuwe berichten in uw voice-mail
							Tijdens interne gesprekken
HS-x							x = Handset nummer

3. INSTALLATIE

•Sluit de connector van het telefoonsnoer aan op het telefoontoestel en steek het andere uiteinde in de wandcontactdoos van het telefoonnet.

•Steek de kleine stekker van de AC-adapter in het toestel en het andere uiteinde in het stopcontact..

Tel

Telefoonkabel

Stroomkabel

NEDERLANDS

Topcom Butler 2900 / Twin / Triple

15

Topcom Butler 2900 / Twin / Triple

3.2 HANDSET LADER

•Steek de AC-adapter in het stopcontact.

3.3 HANDSET

•Plaats de 2 oplaadbare batterijen (AAA) in de batterijruimte onderaan de handset..

+	-
-	+

Plaats de handset op het basisstation. De rode laadindicator gaat aan zolang de handset op de basis ligt. Laad de handset gedurende 24 uur op alvorens de handset voor het eerst te gebruiken. Om de levensduur van de

batterijen te verlengen, dient men de batterijen regelmatig volledig te ontladen. Van zodra de handset een bieptoon laat horen en het batterij-icoon leeg is moet u de handset terug op de basis plaatsen om op te laden.

4. BATTERIJ LEEG INDICATOR

Als de batterij leeg is, voert de handset geen operaties meer uit. Als een batterij volledig leeg is en u hebt deze even op de basis gelegd om op te laden, geeft het Batterijsymbool aan dat de batterij weer helemaal opgeladen is. Dit is echter niet het geval. De capaciteit zal snel dalen. Gelieve de batterij op te laden gedurende minstens 12 uur.

• Volle batterij

• Lege batterij

Als u in gesprek bent en de batterij is bijna leeg, weerklinkt elke 60 seconden een waarschuwingssignaal. Leg de handset op de basis om op te laden.

16	Topcom Butler 2900 / Twin / Triple

Topcom Butler 2900 / Twin / Triple

5. WERKING TELEFOON

5.1 UITGAANDE GESPREKKEN

5.1.1 Gewoon telefoneren

•Druk op de Lijntoets . U hoort de kiestoon.

•Voer het gewenste telefoonnummer in.

•Druk op de Lijntoets om, na het gesprek, de verbinding te verbreken.

5.1.2 Blokkiezen

•Geef het gewenste telefoonnummer in. Foutieve ingaven kunnen gecorrigeerd worden met behulp van de Mutetoets . Als u gedurende 10 seconden op geen enkele toets drukt, verdwijnt het reeds ingegeven nummer en keert de handset terug naar standby-modus.

•Druk op de Lijntoets . Het nummer wordt gevormd.

•Druk op de Lijntoets om, na het gesprek, de verbinding te verbreken.

5.1.3 Terugbellen van het laatst gevormde nummer

•Druk op de Lijntoets .

•De Lijn/Laad-indicator (LED) op de basis knippert.

•U hoort de kiestoon.

•Druk op de Herkiestoets . Het nummer dat u als laatste hebt opgebeld, wordt automatisch gevormd zonder dat u het nummer opnieuw moet vormen.

5.1.4 Terugbellen van één van de 3 laatst gevormde nummers

•	Druk op de Herkiestoets . Het nummer dat u het laatst hebt opgebeld, verschijnt op de display. Als u één van
	de 3 laatst gevormde nummers wil terugbellen, drukt u enkele keren op de Herkiestoets		tot het gewenste
	nummer op de display verschijnt.
•	Druk op de Lijntoets .
•	Het nummer dat op de display staat, wordt automatisch gevormd zonder dat u het nummer opnieuw moet vormen.
•	Druk, na het gesprek, op de Lijntoets	om de verbinding te verbreken of leg de handset op de basis.

5.2 INKOMENDE OPROEPEN

•Bij een binnenkomende oproep, begint de handset te rinkelen. De LED op het basisstation knippert.

•Druk op de Lijntoets om de oproep te beantwoorden.

5.3 HANDENVRIJ-FUNCTIE AAN-/UITSCHAKELEN

Deze functie laat u toe een gesprek te voeren zonder dat u de hoorn in de hand hoeft te nemen. Als u in gesprek bent, drukt u op de Handenvrij-toets om de handenvrij-functie aan te schakelen. Druk op dezelfde toets om de handenvrij-functie uit te schakelen.

Opmerking: Als u handenvrij aan het telefoneren bent en u wil het volume aanpassen, druk dan op de Volume-toets .

Opgepast !! Tijdens het gebruik van de handenvrij functie zullen de batterijen vlugger leeg zijn!

5.4 GEHEUGENNUMMERS PROGRAMMEREN

Men kan maximum 10 indirecte nummers van max. 25 digits programmeren in het geheugen van de telefoon.

•Druk en hou de geheugentoets in tot het -icoontje verschijnt.

•Geef het telefoonnummer is dat u wenst te bewaren.

•Druk opnieuw op de geheugentoets ter bevestiging.

•Geef de geheugenlocatie (0-9) in waar u het telefoonnummer wenst te bewaren.

•Na de confirmatietoon zal de -icoon verdwijnen.

Opmerkingen:

Indien u een pause van 3 seconden wilt programmeren, druk dan op de herkies/pause /P toets.

NEDERLANDS

Topcom Butler 2900 / Twin / Triple

17