900MHz Cordless Phone
with Caller ID and Digital Answering System
43-3827/43-3870
10 Number Memory Dialing — stores 10 numbers in memory for easy dialing. See “Memory Dialing from Talk Mode” on Page 19.
Long Battery Life — the supplied battery pack (when fully charged) provides about 7 hours of talk time or 14 days of standby time.
20 Channels — automatically selects a clear channel when you make or answer a call. You can also manually change channels during
a call. See “Selecting a Different Channel” on Page 15.
Headset Jack — connects an optional headset (available at your local RadioShack store) for hands-free convenience. See “Headset Installation” on Page 42.
Toll-Saver — lets you avoid unnecessary charges when you call by long distance to check your messages. See “Setting the ring time” on Page 31.
! IMPORTANT !
If an icon appears at the end of a paragraph, go to the box on that page with the corresponding icon for pertinent information.
o— Warning ! — Important " — Caution
Ô— Note
CID/ |
SPEED |
MENU |
DIAL |
FLASH
OWNER’S MANUAL
Please read before using this equipment.
© 2003 RadioShack Corporation.
All Rights Reserved.
RadioShack and RadioShack.com are trademarks used by RadioShack Corporation.
ENERGYSTAR and the ENERGYSTAR certification mark are registered US marks.
Instructions Safety Important
CONTENTS |
|
Important Safety Instructions . |
2 |
Battery Safety Instructions ... |
4 |
Introduction .......................... |
5 |
Important Caller ID |
|
Information ........................... |
5 |
Read This Before |
|
Installation ........................ |
6 |
Installation ............................ |
7 |
Mounting the Phone ......... |
7 |
On a Desk Top ............... |
7 |
On a Wall Plate or Wall ... |
8 |
Connecting, Charging and |
|
Replacing the Battery Pack |
9 |
Recycling Ni-Cd |
|
Batteries ....................... |
10 |
Setting Menu Options ..... |
11 |
Caller ID Options .......... |
11 |
Choosing the Dial |
|
Mode ............................ |
12 |
Setting the Language ... |
13 |
Operation ........................... |
13 |
Making and Receiving |
|
Calls ................................ |
13 |
Adjusting the Handset |
|
Ringer and Earpiece |
|
Volume ............................ |
14 |
Handset Ringer Tone and |
|
Volume ......................... |
14 |
Earpiece Volume .......... |
14 |
Temporarily Mute Ringer |
14 |
Redial ............................. |
14 |
Tone Dialing Switch-over |
14 |
Traveling Out-of-Range ... |
15 |
Selecting a Different |
|
Channel .......................... |
15 |
Page ............................... |
15 |
Flash and Call Waiting .... |
15 |
Memory Dialing .................. |
16 |
Storing Phone Numbers |
|
and Names ..................... |
16 |
Steps for Entering Names |
|
and Special Characters .. |
17 |
If You Make a Mistake |
|
while Entering a Name .. |
18 |
Making Calls with Memory |
|
Dialing ............................. |
19 |
Memory Dialing from |
|
Standby Mode .............. |
19 |
Display a Programmed |
|
Number ........................ |
19 |
Memory Dialing from Talk |
|
Mode ............................ |
19 |
Chain Dialing .................. |
19 |
Editing a Stored Name |
|
and/or Phone Number .... |
20 |
Erasing a Stored Name |
|
and Phone Number ........ |
21 |
Testing Stored Emergency |
|
Numbers ...................... |
22 |
(Continued) |
|
WARNING: To reduce the risk of fire or shock hazard, do not expose this product to rain or moisture.
|
|
.CAUTION. |
|
|
|
CAUTION: TO REDUCE THE RISK OF ELECTRIC |
|
|
|
|
! |
|
SHOCK, DO NOT REMOVE COVER OR BACK. NO |
||
|
|
|
|
|
USER-SERVICEABLE PARTS INSIDE. REFER |
||
|
RISK OF ELECTRIC SHOCK |
|
|||||
|
|
SERVICING TO QUALIFIED PERSONNEL. |
|||||
|
|
DO NOT OPEN |
|
|
|
|
|
|
|
|
|
|
|||
|
|
|
|
|
|
|
The lightning symbol is intended to alert you to |
|
|
|
|
|
|
||
|
|
The exclamation symbol is intended to |
|
the presence of uninsulated dangerous voltage |
|||
! |
|
inform you that important operating and |
|
within this product’s enclosure that might be of |
|||
|
maintenance instructions are included in |
|
sufficient magnitude to constitute a risk of |
||||
|
|
the literature accompanying this product. |
|
electric shock. Do not open the product’s case. |
|||
|
|
|
|
|
|
|
|
IMPORTANT SAFETY INSTRUCTIONS
When using your telephone equipment, basic safety precautions should always be followed to reduce the risk of fire, electric shock and injury to persons, including the following:
1.Read and understand all instructions.
2.Follow all warnings and instructions marked on the product.
3.Never install telephone wiring during a lightning storm.
4.Never install telephone jacks in wet locations unless the jack is specifically designed for wet locations.
5.Never touch uninsulated telephone wires or terminals unless the telephone line has been disconnected at the network interface.
6.Use caution when installing or modifying telephone lines.
7.Do not affix the AC power supply cord to building surfaces with metal fittings (if the product has an AC power cord).
8.Unplug this product from the wall outlet before cleaning. Do not use liquid cleaners or aerosol cleaners. Use a damp cloth for cleaning.
9.Do not use this product near water, for example, near a bathtub, wash bowl, kitchen sink, or laundry tub, in a wet basement, or near a swimming pool.
10.Do not place this product on an unstable cart, stand, or table. The product may fall, causing serious damage to the product.
2
11.Slots and openings in the telephone’s cabinet and the back or bottom are provided for ventilation. To protect the telephone from overheating, these openings must not be blocked or covered. The openings should never be blocked by placing the product on a bed, sofa, rug, or other similar surface. This product should never be placed near or over a radiator or heat register. This product should not be placed in a built-in installation unless proper ventilation is provided.
12.This product should be operated only from the type of power source indicated on the marking label. If you are not sure of the type of power supply to your home, consult your local power company.
13.Do not allow anything to rest on the power cord. Do not locate this product where the cord will be stepped on.
14.Do not overload wall outlets and extension cords as this can result in a risk of fire or electric shock.
15.Never push objects of any kind into this product through cabinet slots as they may touch dangerous voltage points or short out parts that could result in a risk of fire or electric shock. Never spill liquid of any kind on the product.
16.To reduce the risk of electric shock, do not disassemble this product. Take it to a qualified serviceman when service or repair work is required. Opening or removing covers may expose you to dangerous voltages or other risks. Incorrect reassembly can cause electric shock when the product is subsequently used.
17.Unplug this product from the wall outlet and refer servicing to qualified services personnel under the following conditions:
•When the power cord plug is damaged or frayed.
•If liquid has been spilled into the product.
CONTENTS |
|
(continued) |
|
One-touch Speed Dial .... |
22 |
Storing and Editing the |
|
Speed Dial ...................... |
22 |
Making calls with the |
|
Speed Dial ...................... |
22 |
Deleting the Speed Dial .. |
23 |
Caller ID .............................. |
23 |
When the Telephone |
|
Rings .............................. |
24 |
Viewing the Caller ID |
|
Message List .................. |
25 |
Deleting Information from |
|
the Caller ID List ............. |
25 |
Deleting a Caller ID |
|
Message ...................... |
25 |
Deleting all Caller ID |
|
Names/Numbers .......... |
26 |
Using the Caller ID List ... 26 |
|
Calling a Party from the |
|
Caller ID List ................ |
26 |
Long Distance Calls and |
|
Area Code Setting/ |
|
Cancellation ................. |
26 |
Dial Edit ........................ |
26 |
Storing Caller ID |
|
Messages in Memory |
|
dialing ........................... |
27 |
The Integrated Answering |
|
Device ................................ |
27 |
Features ......................... |
28 |
Turning the Answering |
|
System On/Off ................ |
28 |
Setting up Your Answering |
|
System ............................ |
29 |
Using the Menu Mode .. |
29 |
Setting the Time ........... |
29 |
Setting a Personal |
|
Security Code (PIN) ..... |
30 |
Setting the ring time ..... |
31 |
Selecting the message |
|
record time ................... |
32 |
Setting the Message Alert |
|
tone .............................. |
33 |
Selecting the Language . 34 |
|
Setting Your Outgoing |
|
Message (Greeting) ........ |
34 |
Using Your Answering |
|
System ............................ |
36 |
Additional Information ........ |
42 |
Installing the optional |
|
Beltclip ............................ |
42 |
Headset Installation ........ |
42 |
Troubleshooting .................. |
43 |
Care ................................... |
45 |
Important Information ......... |
45 |
FCC Statement .................. |
46 |
Surge Protection.............. |
47 |
Important Safety Instructions
3
Instructions Safety Battery
" CAUTION "
TO REDUCE THE RISK OF FIRE OR INJURY, READ AND FOLLOW THESE INSTRUCTIONS.
As an ENERGYSTAR Partner, RadioShack Corporation has determined that this product meets the ENERGYSTAR guidelines for energy efficiency.
•If the product has been exposed to rain or water.
•If the product does not operate normally by following the operating instructions.
18.Adjust only those controls that are covered by the operating instructions because improper adjustments of other controls may result in damage and will often require extensive work by a qualified technician to restore the product to normal operation.
19.If the product has been dropped or the cabinet has been damaged.
20.If the product exhibits a distinct change in performance.
21.Avoid using a telephone (other than a cordless type) during an electrical storm. There may be a remote risk of electric shock from lightning.
22.Do not use the telephone to report a gas leak while in the vicinity of the leak.
BATTERY SAFETY
INSTRUCTIONS
•Use only the appropriate type and size battery
pack specified in the instruction manual provided for this product. "
•Do not dispose of the battery pack in a fire. The cell may explode. Check with local codes for possible special disposal instructions.
•Do not open or mutilate the battery pack. Released electrolyte is corrosive and may cause damage to the eyes or skin. It may be toxic if swallowed.
•Exercise care in handing the battery pack in order not to short it with conducting materials such as rings, bracelets and keys. The battery or conductor may overheat and cause burns.
4
•Charge the battery pack provided with or identified for use with this product only in accordance with the instructions and limitations specified in the instruction manual provided for this product.
•Observe proper polarity orientation between the battery pack and battery charger.
SAVE THESE
INSTRUCTIONS
INTRODUCTION
Thank you for purchasing a RadioShack 900 MHz Cordless Telephone. Your telephone provides excellent clarity and range and integrates Caller ID, Call Waiting ID, and a digital answering system into one space-saving device. The 900 MHz band provides less interference, clearer sound, and greater range than 46/49 MHz cordless telephones.
The digital answering system provides clear reliable messaging with call screening, day/time stamp, call counter, remote access and instant skip or replay messaging.
The Caller ID records each caller’s name (if available in your area), telephone number, and the date and time of the call, as provided by your local phone company to Caller ID service subscribers. !
IMPORTANT CALLER ID
INFORMATION
To use Caller ID and Call Waiting, you must be in an area where those services are available and you must subscribe to those services through your local phone company. Where Caller ID is offered, one or more options are generally available:
! IMPORTANT !
Cordless phones such as this one require AC power to operate. When the AC power is off, you cannot dial out or receive incoming calls using your phone. To be safe, you should also have a phone that does not need AC power to operate (not a cordless phone) so you can still make and receive calls if there is an AC power failure.
When AC power is lost, the phone loses the security access-protection code connection between the base and the handset. When power is restored, put the handset on the base briefly to restore this connection.
Introduction
5
Information ID Caller Important
•caller’s number only
•caller’s name only
•caller’s name and number
If you subscribe to Call Waiting ID and Caller ID, the system can show you the incoming caller information, even when you are already talking on the phone.
READ THIS BEFORE INSTALLATION
We have designed your phone to conform to federal regulations and you can connect it to most phone lines. However, each device that you connect to the telephone line draws power from the line. We refer to this power draw as the phone’s ringer equivalence number, or REN. The REN is on the bottom of your phone.
If you use more than one phone or other device on the line, add up all the RENs. If the total is more than five (three in rural areas), your phones might not ring. If ringer operation is impaired, remove one of the devices from the line.
The digital answering system stores up to 11 minutes of messages on a computer chip and records each message’s day and time. This gives you advanced capabilities over tape-based answering machines:
•You can delete individual messages and save the rest.
•There are no tapes to bother with and no tape mechanisms to wear out.
The remote operation feature lets you operate your answering system from a touch-tone phone (or from a rotary phone with a pocket tone dialer).
6
INSTALLATION
MOUNTING THE PHONE
You can place the phone on a desk or table, mount it on a standard wall plate, or directly on a wall. Choose a location that is: Ô
•near an AC outlet
•near a modular telephone line jack
•out of the way of normal activities
•away from electrical machinery, electrical appliances, metal walls or filing cabinets, wireless intercoms, alarms, and room monitors
•away from other cordless phones
You can try different locations to see which provides the best performance. "
Your telephone connects directly to a modular telephone line jack. If your telephone wiring does not have a modular jack, you can update the wiring yourself using jacks and adapters (available at your local RadioShack store or online at RadioShack.com), or have the telephone company update the wiring for you. You must use compatible modular jacks that are compliant with Part 68 of FCC Rules. The USOC number of the jack to be installed is RJ11C (RJ11W for a wall plate).
On a Desk Top
1.Plug one end of the supplied long modular cord into the TEL LINE jack on the base’s back.
2.Plug the modular cord’s other end into a modular telephone line jack.
DC IN 9V
TEL LINE
" CAUTION "
You must use a
!Class 2 power source that
supplies 9V DC and delivers at least 350 mA. Its center tip must be set to positive and its plug must fit the phone's DC IN 9V jack. The supplied adapter meets these specifications. Using an adapter that does not meet these specifications could damage the phone or the adapter.
•Always connect the AC adapter to the phone before you connect it to AC power. When you finish, disconnect the adapter from AC power before you disconnect it from the phone.
ÔNOTE Ô
•If your home has specially wired alarm equipment connected to the telephone line, be sure that installing the system does not disable your alarm equipment. If you have questions about what will disable alarm equipment, contact your telephone company or a qualified installer.
Installation
7
Installation
3.Insert the supplied AC adapter’s barrel plug into the DC IN 9V jack on the back.
4.Route the adapter’s cord through the strain relief slot on the base’s bottom.
5.Plug the adapter into a standard AC outlet.
6.Lift the base’s antenna to a vertical position.
On a Wall Plate or Wall
To mount the phone directly on a wall, you need two screws (not supplied) with heads that fit into the keyhole slots on the base. Drill two holes 315/16 inches apart. Thread a screw into each hole, letting the heads extend about 1/8 inch.
1.Plug one end of the supplied modular cord (short for a wall plate, long for direct wall mounting) into the TEL LINE jack on the base’s back.
2. Insert the |
DC IN 9V |
TEL LINE |
|
supplied AC |
|||
|
|||
|
|
||
adapter’s barrel |
|
|
|
plug into the DC |
|
|
|
IN 9V jack. |
|
|
3. Route the adapter and modular cords through the base’s grooves.
4.For a wall plate,
plug the modular cord’s other end into the wall plate jack, then align the base’s keyhole slots with the wall plate studs and slide the base downward to secure it.
8
For direct wall mounting, align the base’s keyhole slots with the mounting screws and slide the base downward to secure it.
5.Plug the adapter into a standard AC outlet.
6.Lift the base’s antenna to a vertical position.
CONNECTING, CHARGING AND REPLACING THE BATTERY PACK
The phone comes with a rechargeable Ni-Cd (nickel-cadmium) battery pack installed in the handset, but not connected. Before using your phone, you must connect the battery pack, then charge it for about 24 hours.
1.Press up on the latch and lift the battery pack compartment cover.
2.Lift the battery pack out of the compartment.
3.Plug the battery pack’s
connector into the socket in the compartment. The connector fits only one way.
4.Put the battery pack in the compartment.
5.Replace the cover.
To charge the battery pack, place the handset on the base, face up or down. The base’s CHARGE/IN USE indicator lights. !
Recharge the battery pack when Low Battery flashes.Ô
! IMPORTANT !
Be sure the battery pack is properly connected before you try to charge it. The CHARGE/IN USE indicator lights when the handset is on the base even if the battery pack is not connected properly.
ÔNOTE Ô
•If the phone does not work, recharge the battery pack. (The battery power might be too low for the display to operate.)
•If the battery pack becomes weak during a call, the handset beeps and Low Battery flashes. When this happens, you cannot make a call on the phone until you recharge the battery pack.
•If the battery pack is completely discharged or the base loses power while the handset is away from it, place the handset on the base to change the security access-protection code. If it was the handset that lost power, recharge the battery pack.
Installation
9
Installation
oWARNINGo
Dispose of the old battery pack promptly and properly. Do not burn or bury it (see “Battery Safety Instructions” on Page 4 for additional information on proper battery handling).
When you first use the phone after charging or recharging the battery pack, the phone might not work and you might hear error beeps. If this happens, return the handset to the base for about 5 seconds to change the security access-protection code.
Using a pencil eraser, clean the charging contacts on the handset and the base about once a month.
About once a month, fully discharge the battery pack by keeping the handset off the base until Low Battery flashes. Otherwise, the battery pack loses its ability to fully recharge.
The supplied battery pack should last about a year. If the battery pack does not hold a charge for more than 2 hours after an overnight charge, replace it with a new 3.6V, 600 mAh battery pack with a connector that fits the socket in the battery compartment. You can order a replacement battery pack through your local RadioShack store (or online at RadioShack.com). Install the new battery pack and charge it for about 24 hours. o
If you have trouble replacing the battery pack, take the phone to your local RadioShack for assistance.
Recycling Ni-Cd Batteries.
The EPA certified RBRC® Battery Recycling Seal on the nickel-cadmium (Ni-Cd) battery indicates RadioShack is voluntarily participating in an industry program to collect and recycle these
batteries at the end of their useful life, when taken out of service in the United States or Canada. The RBRC program provides a convenient alternative to placing used Ni-Cd batteries into the trash or the municipal waste stream, which may be illegal in your area. Please call 1-800-THE-SHACK (1-800- 843-7422) for information on Ni-Cd battery recycling and disposal bans/restrictions in your
10
area. RadioShack’s involvement in this program is part of the company’s commitment to preserving our environment and conserving our natural resources.
SETTING MENU OPTIONS
There are five setup options available. They are Caller ID options [AutoTalk, CIDCW (Caller ID on Call Waiting), and Area Code], Dial Mode and Language.
AutoTalk allows you to answer the phone without pressing the talk/FLASH button. If the phone rings when AutoTalk is on, simply remove the handset from the base and the phone automatically answers the call. If the phone rings when AutoTalk is off, you must press talk/FLASH to answer the call.
Caller ID Options
To change your Auto Talk and CIDCW:
1.When the pone is in the standby mode, press and hold CID/MENU.
2.Use # or $, or a number key (1 and 2) to move the pointer to the selection that you would like to change.
Press SEL to toggle between On and Off.
3.Press end and return the handset to the base unit to complete the setting. The handset returns to the standby mode.
To enter your Area Code
If you enter a 3-digit area code number in the Area Code option, your local area code does not appear in Caller ID messages. Do not program this option, if your calling area requires 10-digit dialing.
When reviewing Caller ID messages, you will see only the local seven digit number. For calls received
Installation
11
Installation
Ô NOTE Ô
When the area code has already been stored in memory, the stored area code will be displayed. To change it, use the CH/DEL and number keys to enter the new area code. Then press SEL. A confirmation tone sounds.
To complete the setting, press end or return the handset to the base unit.
ÔNOTE Ô
•If you are not sure of your dialing system, make a trial call. If the call connects, leave the setting as is, otherwise set for pulse dialing.
•If your phone system requires pulse dialing and you need to send the DTMF tones for certain situations during a call, you may “switchover” to tone dialing (refer to “Tone Dialing Switch-over” on page
14).
from outside your local area code, you will see a full 10-digit number.
1.When the phone is in the standby mode, press and hold CID/MENU.
2.Press 3 or press $ twice to select Area Code. Ô
3.Press SEL.
4.Use the number keys (0 to 9), #/%, /TONE/&, or CH/DEL to enter the 3-digit area code.
5.Press SEL. A confirmation tone sounds and the displayed area code is entered.
6.Press end or return the handset to the base unit to complete the setting. The handset returns to the standby mode.
Choosing the Dial Mode Ô
Most phone systems use tone dialing which sends DTMF tones through the phone lines. However, some phone systems still use pulse dialing such as in rural areas. The default setting is tone dialing. Depending on your dialing system, set the mode as follows:
1.When the phone is in the standby mode, press and hold CID/MENU.
2.Press 4 or press $ three times to select Dial.
3.Press SEL to toggle between Tone and
Pulse.
4.Press end or return the handset to the base unit to complete the setting. The handset returns to the standby mode.
12
Setting the Language
1.When the phone is in the standby mode, Press and hold CID/MENU.
2.Press 5 or press $ four times to select
Language.
3.Press SEL to toggle between Eng and Fr..
4.Press end or return the handset to the base unit to complete the setting. The handset returns to the standby mode.
OPERATION
MAKING AND RECEIVING CALLS
Even when you turn off the base’s ringer, you can still make or receive calls using this phone. Telephones on the same line and the handset (if its ringer is not turned off) still ring when there is an incoming call.
Action |
Handset On Base |
Handset Off Base |
|
|
|
|
|
|
Pick up the handset |
Press talk/FLASH, |
|
To |
(Auto Talk: On),Ô or |
any number, /TONE/ |
|
pick up the handset |
& or #/% (Auto Talk: |
||
receive |
|||
and press talk/ |
On). |
||
a call |
|||
FLASH (Auto Talk: |
|
||
|
|
||
|
Off). |
|
|
|
|
|
|
|
1)Pick up the handset. |
1)Press talk/FLASH. |
|
|
2)Press talk/FLASH. |
2)Listen for the dial |
|
|
3)Listen for the dial |
tone. |
|
To |
tone. |
3)Dial the number. |
|
4)Dial the number. |
|
||
make a |
|
||
OR |
OR |
||
call |
|||
1)Pick up the handset. |
Dial the number, then |
||
|
|||
|
2)Dial the number, |
press talk/FLASH. |
|
|
then press talk/ |
|
|
|
FLASH. |
|
|
To hang |
Press end or return the handset to the base |
||
up |
(Auto Standby). |
|
|
|
|
|
Ô NOTE Ô
Refer to page 11 “Setting menu options” to turn on the Auto Talk feature if desired.
Operation
13
Operation
Ô NOTE Ô
When you press # in Maximum mode or $ in Low mode, an error tone sounds.
Action |
Handset On Base |
Handset Off Base |
|
|
|
|
1)Pick up the handset. |
1)Press talk/FLASH. |
|
2)Press talk/FLASH. |
2)Listen for the dial |
|
3)Listen for the dial |
tone. |
|
tone. |
3)Press PAUSE/RDL. |
To |
4)Press PAUSE/RDL. |
|
redial |
OR |
OR |
|
1)Pick up the handset. |
Press PAUSE/RDL, |
|
2)Press PAUSE/RDL, |
then press talk/ |
|
then press talk/ |
FLASH. |
|
FLASH. |
|
|
|
|
ADJUSTING THE HANDSET RINGER
AND EARPIECE VOLUME
Handset Ringer Tone and Volume
Press # or $ in standby mode to select one of five ringer tones and volume combinations.
Earpiece Volume
Press # or $ repeatedly during a call to change the earpiece volume of the handset. This setting will remain in effect after the telephone call has ended.Ô
Temporarily Mute Ringer
If the handset is off the base, simply press end to temporarily mute the incoming ring. The ringer will sound with the next incoming call.
REDIAL
The PAUSE/RDL key redials the last number dialed. The redialed number can be up to 32 digits long.
TONE DIALING SWITCH-OVER
Some telephone companies use equipment that requires pulse dialing (sometimes referred to as rotary dialing). If you need to enter tone dialing digits, you can switch-over to tone dialing during the
14
call. For example, entering your bank account number after you have called your bank. Ô
Initially make your call with the pulse dialing mode. Once your call connects, press /TONE/&. Enter the desired number. These digits will be sent as tone dialing. Once the call ends, the tone mode is canceled and pulse dialing mode resumes.
TRAVELING OUT-OF-RANGE
During a call, as you begin to move your handset too far from your base unit, noise increases. If you pass the range limits of the base unit, your call will terminate within 5 minutes.
SELECTING A DIFFERENT CHANNEL
If you encounter interference while using your phone, you can manually change the phone’s channel for clear operation. This function works only when the phone is in use.
Press CH/DEL. Scanning appears on the display, indicating the phone is changing to another channel.
PAGE
To locate the handset (while it’s off the base), press PAGE on the base. The handset beeps for 60 seconds.Ô
Paging is canceled when pressing any handset key, PAGE on the base or the handset is returned to the base.
FLASH AND CALL WAITING
If you have “Call Waiting” service and a call waiting tone sounds while you are on a call, press talk/ FLASH to accept the waiting call. There is a short pause, then you will hear the new caller. To return to the original caller, press talk/FLASH again.Ô
Ô NOTE Ô
Tone Dialing Switch Over
•The tone feature only applies when the dial mode is set to pulse.
•This special number can be stored in a memory location. This is referred to as Chain Dialing (See page 19.)
Page
•Paging is also canceled when the phone receive an incoming call.
Flash and Call Waiting
•You must subscribe through your local telephone company to receive Call Waiting Service.
Operation
15